StopTech Ford Escape AeroRotor 2-Piece Black Hat Coated Rotor Slotted, Front Right, StopTech Ford Focus AeroRotor 2-Piece Black Hat Coated Rotor Slotted, Front Right, StopTech Ford Transit Connect AeroRotor 2-Piece Black Hat Coated Rotor Slotted, Front Right, StopTech Volvo C70 AeroRotor 2-Piece Black Hat Coated Rotor Slotted, Front Right, StopTech Volvo S40 AeroRotor 2-Piece Black Hat Coated Rotor Slotted, Front Right, StopTech Volvo V50 AeroRotor 2-Piece Black Hat Coated Rotor Slotted, Front Right
**** BEFORE Ordering, please check your application using the StopTech Catalog. LMPerformance is not responsible for incorrect Fitment as we are not given fitment data by the manufacturer.
AeroRotor - Black Hat - Zinc Coated Rotor - Slotted Right
StopTech's patented AeroRotors are 2-piece replacement rotors featuring a billet aluminum AeroHat and AeroRotor friction ring. These rotors feature a patented AeroVane optimal cooling vane design to improve rotor airflow, cooling and heat capacity. This improved directional design minimizes turbulence and flows up to 61% more air than any rotor tested. Better airflow means better cooling and less fade.
The 2-piece design of the StopTech AeroRotors allows for independent expansion of the rotor and hat without coning. Additionally, AeroRotor assemblies are up to 8 pounds lighter than stock rotors and are available either drilled or slotted. An optional anti-corrosion gold zinc coating benefits customers who live in cold climates, where snow and road salt are commonly encountered. Zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of rotors.
StopTech AeroRotors are 100% made in the USA, with both casting and machining taking place in California.
StopTech AeroRotor Replacement Kits ARK are designed to replace your vehicle's original factory rotors, while retaining the factory brake calipers. Although the ARK is the same diameter and thickness as the factory rotors, it offers improved cooling, braking, and handling. The directional, floating AeroRotors allow independent expansion of the rotor and hat without coning, thanks to elongated drive pin holes. ARK components include AeroRotor friction rings with patented internal vane design, pre-assembled to billet aluminum AeroHats with directional stand-offs that optimize cooling airflow. The patented AeroRotor vane design pushes up to 80 percent more air than factory rotors for better cooling and reduced fade on the track. The aircraft-grade aluminum hats and 2-piece AeroRotors are up to 8 pounds lighter than stock rotors, allowing faster acceleration and deceleration, and improved handling. StopTech AeroRotors are available slotted or cross-drilled. These slots or holes allow better dissipation of heat, friction material and debris, assuring that fresh pad material is in contact with the rotor every time the brakes are applied. An optional anti-corrosion, zinc finish is available for customers in cold climates, where salt and chemicals are used to melt snow and ice. The zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of the rotors. StopTech AeroRotors are 100 percent made in the USA.
The patented 2-piece AeroRotor assembly uses uniquely designed and patented AeroVanes inside the disc to optimize airflow through the rotor. This improved directional design minimizes turbulence and flows up to 61 percent more air than any other rotor tested. The result is up to 80 percent better airflow over original equipment rotors and 10-30 percent better airflow than other directional vane racing rotors currently available. Better airflow equals better cooling, and better cooling means less fade and better overall brake system performance.
StopTech AeroRotors also feature a proprietary alloy chemistry. By adding molybdenum to the gray iron, carefully targeting a narrow range of hardness and tensile strength values, and controlling the cooling rate of the rotor after casting, StopTech produces a friction ring with added crack resistance as well as improved functionality.
Super strong Inconel drive pin washers - as used in aircraft engines and other racing applications - are practically impervious to oxidation or corrosion even at extreme temperatures.
Street rotors use a curved drive pin washer to add tension to the hat assembly, reducing rattle. Race applications use a flat washer that allows full freedom of movement between hat and friction ring.
StopTech AeroHats feature directional stand offs to further improve airflow and cool the rotor.
Elongated drive pin slots allow separate expansion of rotor and hat to resist coning. Tapered slots allow evacuation of debris that might otherwise accumulate with straight-cut slots.
Drive pins used to affix the hat to the rotor have a slightly out-of-round hole and are self-locking. They withstand high temperatures much better than typical lock washers and allow drive pins to move freely, yet securely, as hat and rotor expand at different rates.
In certain applications where packaging is an issue - such as on the Chevrolet Corvette - StopTech uses slant-head drive pins to provide improved clearance as pads wear.
- Reduced Unsprung and Rotational Mass
- Improved Thermal Capabilities
- Optimized Heat Dissipation
- Designed to Work with OE Calipers
**** Before Ordering, please check your application using the StopTech Catalog, and the StopTech Racing Catalog
Weight: 16.29 lbs
StopTech Ford Escape AeroRotor 2-Piece Black Hat Coated Rotor Slotted, Front Right, StopTech Ford Focus AeroRotor 2-Piece Black Hat Coated Rotor Slotted, Front Right, StopTech Ford Transit Connect AeroRotor 2-Piece Black Hat Coated Rotor Slotted, Front Right, StopTech Volvo C70 AeroRotor 2-Piece Black Hat Coated Rotor Slotted, Front Right, StopTech Volvo S40 AeroRotor 2-Piece Black Hat Coated Rotor Slotted, Front Right, StopTech Volvo V50 AeroRotor 2-Piece Black Hat Coated Rotor Slotted, Front Right
If you own a high performance automobile or enjoy a spin on the racing circuit then you know how critical your choice of brakes is for not only top notch performance but also for your car’s ability to stop without fail. In order to accomplish this goal you need to feel confident in the selection you make and trust the manufacturer to give you an inimitable product and STOPTECH is just such a company.
The STOPTECH brand is the high performance and racing brand of the award winning company CENTRIC PARTS, a leader in the design and production of superlative brake components and systems for passenger vehicles, medium duty trucks, fleet vehicles and high performance vehicles and race cars. STOPTECH was developed with the goal of providing the best in aftermarket high performance brake components and systems for the racing aficionado and high performance enthusiasts like yourself.
STOPTECH has a long history in the area of brake and brake component development having been founded as early as 1999 and they have always focused on becoming the primo aftermarket manufacturer and supplier of high performance brake components and systems. A testament to their dedication and expertise is the fact that they were the first to offer balanced brake upgrades for production cars and consequently are the worldwide luminary having over 700 platform offerings that dramatically improve overall braking performance.
IMAGES: Images may be a representation and may not reflect the actual product.
(Images May Not be Vehicle Specific. For Display Purposes Only.)
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
