Stoptech Dodge Viper AeroRotor and Hat Pair 2-Piece Coated, Rear 81.263.9942

StopTech Dodge Viper AeroRotor and Hat Pair 2-Piece Coated, Rear, StopTech Dodge Viper AeroRotor and Hat Pair 2-Piece Coated, Rear

StopTech Dodge Viper AeroRotor and Hat Pair 2-Piece Coated, Rear, StopTech Dodge Viper AeroRotor and Hat Pair 2-Piece Coated, Rear

**** BEFORE Ordering, please check your application using the StopTech Catalog. LMPerformance is not responsible for incorrect Fitment as we are not given fitment data by the manufacturer.

Drilled and Zinc Plated Aero-Rotor Kit

StopTech 81.263.9942 Important Fitment Notes: 1 Pc Disc

StopTech's patented AeroRotors are 2-piece replacement rotors featuring a billet aluminum AeroHat and AeroRotor friction ring. These rotors feature a patented AeroVane optimal cooling vane design to improve rotor airflow, cooling and heat capacity. This improved directional design minimizes turbulence and flows up to 61% more air than any rotor tested. Better airflow means better cooling and less fade.

The 2-piece design of the StopTech AeroRotors allows for independent expansion of the rotor and hat without coning. Additionally, AeroRotor assemblies are up to 8 pounds lighter than stock rotors and are available either drilled or slotted. An optional anti-corrosion gold zinc coating benefits customers who live in cold climates, where snow and road salt are commonly encountered. Zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of rotors.

StopTech AeroRotors are 100% made in the USA, with both casting and machining taking place in California.

StopTech AeroRotor Replacement Kits ARK are designed to replace your vehicle's original factory rotors, while retaining the factory brake calipers. Although the ARK is the same diameter and thickness as the factory rotors, it offers improved cooling, braking, and handling. The directional, floating AeroRotors allow independent expansion of the rotor and hat without coning, thanks to elongated drive pin holes. ARK components include AeroRotor friction rings with patented internal vane design, pre-assembled to billet aluminum AeroHats with directional stand-offs that optimize cooling airflow. The patented AeroRotor vane design pushes up to 80 percent more air than factory rotors for better cooling and reduced fade on the track. The aircraft-grade aluminum hats and 2-piece AeroRotors are up to 8 pounds lighter than stock rotors, allowing faster acceleration and deceleration, and improved handling. StopTech AeroRotors are available slotted or cross-drilled. These slots or holes allow better dissipation of heat, friction material and debris, assuring that fresh pad material is in contact with the rotor every time the brakes are applied. An optional anti-corrosion, zinc finish is available for customers in cold climates, where salt and chemicals are used to melt snow and ice. The zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of the rotors. StopTech AeroRotors are 100 percent made in the USA.

The patented 2-piece AeroRotor assembly uses uniquely designed and patented AeroVanes inside the disc to optimize airflow through the rotor. This improved directional design minimizes turbulence and flows up to 61 percent more air than any other rotor tested. The result is up to 80 percent better airflow over original equipment rotors and 10-30 percent better airflow than other directional vane racing rotors currently available. Better airflow equals better cooling, and better cooling means less fade and better overall brake system performance.

StopTech AeroRotors also feature a proprietary alloy chemistry. By adding molybdenum to the gray iron, carefully targeting a narrow range of hardness and tensile strength values, and controlling the cooling rate of the rotor after casting, StopTech produces a friction ring with added crack resistance as well as improved functionality.

Super strong Inconel drive pin washers - as used in aircraft engines and other racing applications - are practically impervious to oxidation or corrosion even at extreme temperatures.

Street rotors use a curved drive pin washer to add tension to the hat assembly, reducing rattle. Race applications use a flat washer that allows full freedom of movement between hat and friction ring.

StopTech AeroHats feature directional stand offs to further improve airflow and cool the rotor.

Elongated drive pin slots allow separate expansion of rotor and hat to resist coning. Tapered slots allow evacuation of debris that might otherwise accumulate with straight-cut slots.

Drive pins used to affix the hat to the rotor have a slightly out-of-round hole and are self-locking. They withstand high temperatures much better than typical lock washers and allow drive pins to move freely, yet securely, as hat and rotor expand at different rates.

In certain applications where packaging is an issue - such as on the Chevrolet Corvette - StopTech uses slant-head drive pins to provide improved clearance as pads wear.

• Reduced Unsprung and Rotational Mass
• Improved Thermal Capabilities
• Optimized Heat Dissipation
• Designed to Work with OE Calipers

**** Before Ordering, please check your application using the StopTech Catalog, and the StopTech Racing Catalog

Weight: 36.4 lbs

StopTech Dodge Viper AeroRotor and Hat Pair 2-Piece Coated, Rear, StopTech Dodge Viper AeroRotor and Hat Pair 2-Piece Coated, Rear

If you own a high performance automobile or enjoy a spin on the racing circuit then you know how critical your choice of brakes is for not only top notch performance but also for your car’s ability to stop without fail. In order to accomplish this goal you need to feel confident in the selection you make and trust the manufacturer to give you an inimitable product and STOPTECH is just such a company.

The STOPTECH brand is the high performance and racing brand of the award winning company CENTRIC PARTS, a leader in the design and production of superlative brake components and systems for passenger vehicles, medium duty trucks, fleet vehicles and high performance vehicles and race cars. STOPTECH was developed with the goal of providing the best in aftermarket high performance brake components and systems for the racing aficionado and high performance enthusiasts like yourself.

STOPTECH has a long history in the area of brake and brake component development having been founded as early as 1999 and they have always focused on becoming the primo aftermarket manufacturer and supplier of high performance brake components and systems. A testament to their dedication and expertise is the fact that they were the first to offer balanced brake upgrades for production cars and consequently are the worldwide luminary having over 700 platform offerings that dramatically improve overall braking performance.

IMAGES: Images may be a representation and may not reflect the actual product.