Perrin Performance Turbo Heat Shield for Subaru Forester XT, Perrin Performance Turbo Heat Shield for Subaru WRX, Perrin Performance Turbo Heat Shield for Subaru STI, Perrin Performance Turbo Heat Shield for Subaru Legacy GT
Perrin Performance Turbo Heat Shield for Subaru WRX, Perrin Performance Turbo Heat Shield for Subaru Forester XT, Perrin Performance Turbo Heat Shield for Subaru Legacy GT, Perrin Performance Turbo Heat Shield for Subaru STI
Don't leave your turbo uncovered! Protect your intercooler from radiant heat from your turbo with the PERRIN Turbo Heat Shield! The PERRIN Turbo Heat Shield is CNC formed from 304 stainless steel. The backside of the shield is cut to fit all aftermarket downpipes. It is also adjustable front to back allowing the tuner to cover as much of the turbo as possible from application to application. High quality stainless steel hardware included.
Our shield covers more of the turbo charger, leaving less of the exhaust housing exposed. It covers the top of the downpipe, the sides of the turbo and is formed to fit around the wastegate arm. All to help keep heat under the shield where it belongs!
The PERRIN Turbo Heat Shield is adjustable to allow the shield to be pulled over the turbo as much as possible. The Heat Shield uses spot welds, instead of rivets. When spot welds are done correctly, they will hold just as well as any bolts or rivet and will not loosen over time. PERRIN Turbo Heat Shield uses only high quality spot welds that pass the Nugget Test. During a production run, we actually ripped apart a test joint. The sheet metal should fail before the weld, leaving a small nugget of metal behind, verifying the spot weld penetrated all layers of metal.
It is perfect for those not wanting to cut the OEM turbo heat shield when installing our PERRIN downpipe. The PERRIN Turbo Heat Shield covers more of the turbo than competitors shields. Comes with a brushed stainless finish
**** If you are upgrading to our heat shield on a vehicle that is missing the original shield or is missing mounting brackets, we have the OEM parts you will need listed below. Upper Downpipe/Turbo Shield Bracket - 44021AA014 / Up-pipe Support Bracket - 14427AA022
Fitments
- Left Hand Drive cars - Yes, 2002-2014 for all WRX, Yes, 2004-2019 for all STI
- Right Hand Drive cars - No, hits on break master cylinder booster
- Aftermarket Turbos - Yes, stock location replacement
- 2005-2009 Legacy GT - Yes
- 2010+ Legacy GT - Yes
- 2010+ Outback XT - Yes
Perrin Performance Turbo Heat Shield for Subaru Forester XT, Perrin Performance Turbo Heat Shield for Subaru WRX, Perrin Performance Turbo Heat Shield for Subaru STI, Perrin Performance Turbo Heat Shield for Subaru Legacy GT
Since you have navigated to this spot on our website then you must be or anticipate being a proud Subaru owner and are in the market for an aftermarket performance part. LMPERFORMANCE and PERRIN PERFORMANCE can certainly supply you with that. But first let us tell you about the company you want to buy from, PERRIN PERFORMANCE, so that you can make an informed decision.
Let’s start by telling you that PERRIN PERFORMANCE has been in business since 1996 when its owner, Adam Taft began importing and selling performance parts. The company has continued to grow over the years and then in 2002 the company began selling Subaru parts exclusively and manufacturing Perrin Subaru parts under the name PERRIN. As a testament to their success In 2017 the company had grown from having only one employee to having 25 employees, are now housed in a 25,000 square foot facility in Hillsboro, Oregon. All of this affords PERRIN PERFORMANCE the opportunity to offer the Subaru owner the finest aftermarket performance parts on today’s market.
If you are in the market for a performance improvement for you Subaru, PERRIN PERFORMANCE can meet your needs whether it be parts like a cold air intake or a short ram intake, those impressive aftermarket performance parts whose purpose is to allow more oxygen into the combustion chamber thus effectively affording more power. This is all accomplished because the air filter is moved outside of your car’s engine compartment allowing cooler air to be taken into the engine for combustion. And don’t forget that PERRIN intake sound that is impressive under load because it unlocks the sound of your turbo flat-4 and causes your blow off valve to become much more impressive.
Or perhaps you are in the market for a turbo heat shield, that performance part that some laud to be one of the most cost-effective power increasing modifications you could make since it decreases underhood temperatures resulting in better radiator performance, cooler intake charges and longer life for vacuum lines and wiring harnesses and PERRIN PERFORMANCE has just the part for your car.
And for those Subaru owners who want a smoother shifting experience take a look at the PERRIN PERFORMANCE shift stop with its solid construction and ease of installation and see how effortlessly you get off the line and best of all that jerky on-two shift will be a thing of the past. Another impressive PERRIN PERFORMANCE part is the turbo inlet hose whose smooth surface improves airflow that has been restricted by the OEM accordion pleated hose and of course PERRIN made it is easy to install.
We have introduced you to just a sample of the impressive multiplicity of parts designed and manufactured by PERRIN PERFORMANCE. Just go to the website and see for yourself primo Perrin Subaru parts like the turbo up-pipe, cat back exhaust, equal length header, thermal blanket for the up-pipe, or something as simple as a relocation license plate kit and you will see that PERRIN PERFORMANCE has the part to meet your Subaru needs.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
