S&B Cold Air Intake Audi 8V A3 (Dry Filter), S&B Cold Air Intake Audi 8V S3 (Dry Filter), S&B Cold Air Intake VW MK7 GTI/R (Dry Filter)
S&B Cold Air Intake VW MK7 GTI/R (Dry Filter), S&B Cold Air Intake Audi 8V S3 (Dry Filter), S&B Cold Air Intake Audi 8V A3 (Dry Filter)
Our cold air intake for the 2015-2018 VW MK7 GTI/R / AUDI S3/A3 was engineered to minimize air restriction and flows 29.36% better than stock. Check out the testing process video here. This kit comes with a fully enclosed airbox that protects the filter from dirt and keeps out engine heat.
This kit comes with a massive, highly-efficient air filter which results in better performance and protects your engine. Available in either 8-layer Cotton Cleanable or Dry Extendable media.
Street Legal in All US States: PENDING
Carb Exempt ID: -
S&B Cold Air Intake Audi 8V A3 (Dry Filter), S&B Cold Air Intake Audi 8V S3 (Dry Filter), S&B Cold Air Intake VW MK7 GTI/R (Dry Filter)
Having an inferior or clogged air filter can negatively impact your car’s performance by robbing it of engine power and that is something no driver wants. When deciding to purchase a replacement filter, a cold air intake or other performance part you want a product made by a name you can trust and LMPERFORMANCE wants to do help you do just that by offering you the S&B products.
High quality and low pricing are the consummate goals of S&B and to achieve this they have a manufacturing process that nonpareil with strict testing following ISO 5011 standards with nearly everything being done by S&B in the USA. The company’s objective in the production of cold air intakes, filters and other performance parts is to considerably reduce airflow restriction and at the same time protect your car’s engine.Recognizing how paramount testing is in designing the ultimate product S&B tests using the internationally accepted ISO 5011 Standard in their testing for airflow, efficiency and capacity and they use these testing results to determine how they compare to stock parts and to the competitor’s parts. The testing protocol includes such things as determining the filter’s efficiency making certain your engine is protected for debris while sucking in more air and monitoring the capacity of the filter to determine how much dirt it can hold before it needs to be serviced.And S&B Air Filters doesn’t stop there but has established a primo environmental control system affording them the opportunity of having control over humidity, temperature and barometric pressure. To accomplish this goal S&B uses absolute blankets designed to catch any dust that gets past the filter and additionally they heat the absolute blankets pre and post testing in order to remove humidity thus accomplishing the goal of only weighing what actually bypassed the filter.Unlike some of their competitors who have testing done at low CFMs in order to show higher efficiency rates S&B first determines the maximum CFM a vehicle generates at wide open throttle then they start pulling this amount of air through the intake while shooting fine particles of dust at the filter. Any dust bypassing the filter will be caught in the absolute blanket to determine the efficiency. This is important because it is considerably more difficult to stop dust when there is greater airflow and thus this is a much more reliable testing procedure affording you the guarantee of better protection for your car.S&B acknowledges the fact that competition is important and they use this knowledge as a motivator to continually improve their products by continually testing the competition’s products and then making theirs better. And S&B is so confident they have a superior product they back S&B air filters and intake kits purchased from Authorized Dealers by S&B’s Million Mile Limited Warranty when used under typical driving conditions and on vehicles for which they were designed. If one of their cold air intakes or performance air filters is not performing properly or is defective, S&B will replace it and you can’t get better than that. If you use an S&B product for (1) any type of racing or competitive event (2) any off-road use, (3) custom or modified product, (4) any industrial or marine applications, and/or (5) any illegal highway use. If an S&B product is not covered by their million mile warranty, their products are still warranted against manufacturing defects for one year from the date of purchase. Warranties for other S&B Air Filter products vary by product and use.
IMAGES: Images may be a representation and may not reflect the actual product.
MILLION MILE LIMITED WARRANTY
S&B is firmly committed to providing our customers with best in class, reliable products from Authorized Dealers. S&B products purchased from Authorized Dealers are backed by S&B’s Million Mile Limited Warranty when used under typical driving conditions and on vehicles for which they were designed. If one of our products is not performing properly or is defective, S&B will replace it.
If you purchased S&B products from an unauthorized dealer or if the original factory serial number has been removed, defaced or altered, your S&B limited warranty will not be valid. Unfortunately, there are some websites and dealers who claim to be authorized S&B resellers but are not. S&B Products sold on these unauthorized websites or by unauthorized dealers do not carry a warranty from S&B. When you purchase products from an unauthorized website or dealer you are taking a risk, because these products may be counterfeit, used, or defective. Please protect yourself by ensuring that you only purchase S&B products from an S&B Authorized Dealer.
What is not covered by the S&B Warranty.
If you use an S&B product for (1) any type of racing or competitive event (2) any off-road use, (3) custom or modified product, (4) any industrial or marine applications, and/or (5) any illegal highway use. If an S&B product purchased from an Authorized Dealer is not covered by our Million Mile Limited Warranty, our products are still warranted against manufacturing defects for one (1) year from the date of purchase.
Warranty for Intake Elbows.
The warranty period for S&B Intake Elbows is 5-Years. Returns are not accepted once the parts have been installed. S&B DOES NOT RECOMMEND NOR DOES THE WARRANTY COVER CONDITIONS WHERE THE INTAKE ELBOW IS EXPOSED TO INTERNAL PRESSURE IN EXCESS OF 75 POUNDS PER SQUARE INCH (PSI). Visit www.sbfilters.com for actual burst test results. Exposing the Intake Elbow to pressures in excess of 75 PSI could cause the Intake Elbow to leak and/or rupture causing severe damage to your vehicle and/or serious bodily harm including death. Never run more than 5 PSI of pressure through the Intake Elbow with your hood raised. Special care should be taken when running a vehicle on a dyno to protect all personnel from flying debris in the event of a rupture of the part.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
