StopTech Audi A3 Quattro Big Brake Kit ST-41 Red Calipers & 1-Piece No Coating Slotted Rotors, Front, StopTech Audi A3 Big Brake Kit ST-41 Red Calipers & 1-Piece No Coating Slotted Rotors, Front, StopTech Volkswagen GTI Big Brake Kit ST-41 Red Calipers & 1-Piece No Coating Slotted Rotors, Front
StopTech Audi A3 Quattro Big Brake Kit ST-41 Red Calipers & 1-Piece No Coating Slotted Rotors, Front, StopTech Volkswagen GTI Big Brake Kit ST-41 Red Calipers & 1-Piece No Coating Slotted Rotors, Front
**** BEFORE Ordering, please check your application using the StopTech Catalog. LMPerformance is not responsible for incorrect Fitment as we are not given fitment data by the manufacturer.
StopTech 82.895.5N00.71 Specs:
- Red Caliper / Slotted Disc
- Position: Front
- Rotor: 1-Piece
- Caliper: ST-41
- Rotor Size: 328x25mm
- Caliper Color: Red
- Rotor Type: Slotted
- Finish: No Coating
- Important Fitment Notes: 300mm Rear Disc
StopTech Big Brake Kits exceed stock performance in two key areas: First, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel and?ßconfidence-inspiring responsiveness. The key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why StopTech developed the Balanced Brake Upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking. Every StopTech Balanced Big Brake Kit is engineered to produce that optimal balance using caliper bores and pistons specifically selected and tested for each vehicle application. This is what sets StopTech apart from off-the-shelf solutions. In contrast, a brake upgrade that adds too much front torque as many do, will reduce your car's ability to maximize the traction available from all four tires, robbing you of performance. In addition, a system that uses too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, limiting a driver's control of brake input.
StopTech Big Brake Kits Feature
- High performance brake upgrades for road or track
- Patented StopTech aerorotors for optimized airflow
- Patented, billet aluminum aerohats further increase airflow
- Ultra-stiff StopTech calipers
- Patented bolt-in bridge for reduced compliance
- StopTech stainless steel lines
- Available in several powder-coated finish colors
- All brackets and hardware to complete the job
- Components made in the USA
- Full ISO/TS 16949:2009 certification
StopTech Big Brake Kits offer Balanced Brake Upgrades with optimum brake bias offer the shortest stopping distance with the best pedal feel. Patented AeroRotors offer the best airflow available for better cooling, less fade and longer rotor and pad life.
**** Before Ordering, please check your application using the StopTech Catalog, and the StopTech Racing Catalog
Weight: 66 lbs
*** IMAGES ARE FOR REPRESENTATION ONLY, PLEASE REFER TO THE DESCRIPTIONS AND TITLES FOR CALIPER COLOR AND ROTOR TYPE ***
StopTech Audi A3 Quattro Big Brake Kit ST-41 Red Calipers & 1-Piece No Coating Slotted Rotors, Front, StopTech Audi A3 Big Brake Kit ST-41 Red Calipers & 1-Piece No Coating Slotted Rotors, Front, StopTech Volkswagen GTI Big Brake Kit ST-41 Red Calipers & 1-Piece No Coating Slotted Rotors, Front
If you own a high performance automobile or enjoy a spin on the racing circuit then you know how critical your choice of brakes is for not only top notch performance but also for your car’s ability to stop without fail. In order to accomplish this goal you need to feel confident in the selection you make and trust the manufacturer to give you an inimitable product and STOPTECH is just such a company.
The STOPTECH brand is the high performance and racing brand of the award winning company CENTRIC PARTS, a leader in the design and production of superlative brake components and systems for passenger vehicles, medium duty trucks, fleet vehicles and high performance vehicles and race cars. STOPTECH was developed with the goal of providing the best in aftermarket high performance brake components and systems for the racing aficionado and high performance enthusiasts like yourself.
STOPTECH has a long history in the area of brake and brake component development having been founded as early as 1999 and they have always focused on becoming the primo aftermarket manufacturer and supplier of high performance brake components and systems. A testament to their dedication and expertise is the fact that they were the first to offer balanced brake upgrades for production cars and consequently are the worldwide luminary having over 700 platform offerings that dramatically improve overall braking performance.
IMAGES: Images may be a representation and may not reflect the actual product.
(Images May Not be Vehicle Specific. For Display Purposes Only.)
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
