StopTech Scion FR-S Big Brake Kit ST40 Red Calipers & 1-Piece No Coating Slotted Rotors, Front, StopTech Subaru BRZ Big Brake Kit ST40 Red Calipers & 1-Piece No Coating Slotted Rotors, Front
**** BEFORE Ordering, please check your application using the StopTech Catalog. LMPerformance is not responsible for incorrect Fitment as we are not given fitment data by the manufacturer.
StopTech 82.827.4200.71 Specs:
- Red Caliper / Slotted Disc
- Position: Front
- Rotor: 1-Piece
- Caliper: ST40
- Rotor Size: 326x30mm
- Caliper Color: Red
- Rotor Type: Slotted
- Finish: No Coating
- Important Fitment Notes: 326x30mm Rotor
StopTech Big Brake Kits exceed stock performance in two key areas: First, larger rotors increase heat capacity, allowing a driver to brake harder stop-after-stop with reduced chance of fade. Second, stiffer calipers and stainless steel lines reduce system compliance, providing consistent pedal feel and confidence-inspiring responsiveness.
The key, however, is to increase heat capacity and reduce compliance without upsetting a vehicle's stock front-to-rear brake torque ratio. That is why StopTech developed the Balanced Brake Upgrade design philosophy, which precisely apportions front and rear braking resources while factoring in vehicle weight transfer under braking.
Every StopTech Balanced Big Brake Kit is engineered to produce that optimal balance using caliper bores and pistons specifically selected and tested for each vehicle application. This is what sets StopTech apart from off-the-shelf solutions.
In contrast, a brake upgrade that adds too much front torque (as many do), will reduce your car's ability to maximize the traction available from all four tires, robbing you of performance. In addition, a system that uses too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, limiting a driver's control of brake input.
Features and Benefits:
- Balanced Brake Upgrades with optimum brake bias offer the shortest stopping distance with the best pedal feel.
- Patented AeroRotors offer the best airflow available for better cooling, less fade and longer rotor and pad life.
- StopTech provides the stiffest fully-forged aftermarket calipers with patented, removable bridges that provide better clamping under hard braking and less pad taper.
- StopTech Big Brake Kit components are made in the USA in a 70, 000 square foot California manufacturing, engineering, and R&D center.
1-Piece Rotor Big Brake Kits: StopTech 1-piece rotor big brake kits offer the best performance from a 1-piece rotor upgrade system. Designed for street driven production vehicles, 1-Piece Big Brake Kits include the same forged 2-piece calipers as the StopTech Big Brake Kits, as well as StopTech Stainless Steel Brake Lines, StopTech Sport Brake Pads, application-specific caliper brackets and hardware. The difference is in the use of larger than stock 1-piece rotors, which offer the most value to those seeking better performance than their factory setup.
They offer nearly the same performance as the original StopTech 2-piece AeroRotor Big Brake Kits and Trophy full race systems at a more affordable price point. Designed for street driven production vehicles, StopTech 1-Piece Rotor Big Brake Kits include forged 2-piece calipers, larger StopTech 1-piece Sport Rotors, StopTech Stainless Steel Brake Lines, StopTech Sport Brake Pads and application-specific caliper brackets.
The stiff 2-piece, fully-forged calipers have designated piston sizes specific to each application and provide a firmer, more responsive brake pedal that provides better brake pedal modulation. Depending on the application, 1-Piece Rotor Big Brake Kits are available in two-, four- and six-piston configurations and 5 different caliper colors that use a special high temperature paint to withstand extreme conditions. All StopTech 1-Piece Rotor Big Brake Kits include stiff calipers that utilize silicone dust boots to extend service intervals.
The larger 1-piece StopTech Sport rotors, available in slotted, drilled and drilled+slotted finishes, provide greater heat capacity and reduced brake fade. Also assisting in fade resistance and higher performance are the StopTech Sport Pads which have a high maximum operating temperature, and high bite for responsive brakes that can be driven hard.
StopTech Calipers
- Fully forged and stiff for firmer brake pedal feel
- Carefully engineered, 2-piece design reduces flex.
- The carbon steel caliper bolts running through both halves multiply strength by 3-fold.
- Patented, removable center bridge further resists yaw
- Carefully selected piston sizes for precise torque output
StopTech Brackets and Hardware
- Studs provide strength and durability rather than the more common bolts
- Fully machined aluminum or steel for precision and strength
- Application specific for precise and proper fitment
- All necessary hardware for easy bolt-on installation
StopTech Stainless Steel Brake Lines
- Stainless steel braiding for lower compliance and extra protection
- A variety of fittings for hundreds of applications
- All necessary brackets and fasteners to finish the job
- Provides quicker response
- Firmer pedal feel
- Better brake modulation
StopTech Sport Rotors
- Larger than factory brake rotor for better overall brake performance
- Unique slotting and/or cross-drilling to aid heat and brake dust dispersal
- Black e-coating for added protection from corrosion
- Factory cooling vane design or directional vanes for improved cooling
- Available with an optional Cryogenic treatment for added durability
While wheel clearance is completely dependent on the diameter, offset and spoke design of your wheels, a general guideline is that StopTech kits usually require the following:
- 328mm rotor (12.9) - minimum 17 wheel
- 332mm rotor (13.1) - minimum 17 wheel
- 355mm rotor (14) - minimum 18 wheel
- 380mm rotor (15) - minimum 19 wheel
Balanced Brake Upgrades?ßwith optimum brake bias offer the shortest stopping distance with the best pedal feel. Patented AeroRotors offer the best airflow available for better cooling, less fade and longer rotor and pad life.
**** Before Ordering, please check your application using the StopTech Catalog, and the StopTech Racing Catalog
Weight: 72 lbs
*** IMAGES ARE FOR REPRESENTATION ONLY, PLEASE REFER TO THE DESCRIPTIONS AND TITLES FOR CALIPER COLOR AND ROTOR TYPE ***
StopTech Scion FR-S Big Brake Kit ST40 Red Calipers & 1-Piece No Coating Slotted Rotors, Front, StopTech Subaru BRZ Big Brake Kit ST40 Red Calipers & 1-Piece No Coating Slotted Rotors, Front
If you own a high performance automobile or enjoy a spin on the racing circuit then you know how critical your choice of brakes is for not only top notch performance but also for your car’s ability to stop without fail. In order to accomplish this goal you need to feel confident in the selection you make and trust the manufacturer to give you an inimitable product and STOPTECH is just such a company.
The STOPTECH brand is the high performance and racing brand of the award winning company CENTRIC PARTS, a leader in the design and production of superlative brake components and systems for passenger vehicles, medium duty trucks, fleet vehicles and high performance vehicles and race cars. STOPTECH was developed with the goal of providing the best in aftermarket high performance brake components and systems for the racing aficionado and high performance enthusiasts like yourself.
STOPTECH has a long history in the area of brake and brake component development having been founded as early as 1999 and they have always focused on becoming the primo aftermarket manufacturer and supplier of high performance brake components and systems. A testament to their dedication and expertise is the fact that they were the first to offer balanced brake upgrades for production cars and consequently are the worldwide luminary having over 700 platform offerings that dramatically improve overall braking performance.
IMAGES: Images may be a representation and may not reflect the actual product.
(Images May Not be Vehicle Specific. For Display Purposes Only.)
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.