• APR Performance Nissan GTR Front Air Dam Carbon Fiber FA-603506

    APR Performance FA-603506 | Nissan GTR Front Air Dam Carbon Fiber; 2008-2011
    APR Performance FA-603506 | Nissan GTR Front Air Dam Carbon Fiber; 2008-2011 Alternate Image 1
    APR Performance FA-603506 | Nissan GTR Front Air Dam Carbon Fiber; 2008-2011 Alternate Image 2
    APR Performance FA-603506 | Nissan GTR Front Air Dam Carbon Fiber; 2008-2011 Alternate Image 3

    * Images may be a representation and may not reflect the actual product.

    Have a question about this part?

    Contact Us


Product Description

APR Front Wind Splitters are utilized to give extra traction and control in the front of a car to combat the effects of front end lift. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. With low pressure below the car, the effect of lift is reduced and a driver can gain from the extra traction and control.

APR Front Wind Splitters Feature:

  • Carbon Fiber Reinforcement: All APR Front Wind Splitters are reinforced with sheets of carbon fiber.
  • Fully Functional Undertray: Our Front Wind Splitters are not just add on cosmetic pieces. Every APR Front Wind Splitter completely covers the entire area below a cars front bumper. This allows for smoother air flow below the front bumper, creating more efficient downforce.
  • Factory-like fitment: This vehicle-specific component is designed to match the contours of the vehicle, for a factory-like fitment.
  • Carbon Fiber Construction: This component is formed in the autoclave at high temperatures using pre-pregnated carbon fiber manufacturing processes, for high strength and low weight.
  • UV Resistant Coating: Each APR Performance Carbon Fiber part is finished with UV-resistant clear-coat paint for resistance against various environmental conditions (take care of this as you would take care of your vehicle's paint finish - polish then coat with good-quality wax or synthetic protectant).
  • Mounting Hardware Included

****GTR airdam is designed for road course/circuit racing is and not meant for High Speed/ Top speed runs where the Car will see extended duration of high speeds. With out the ducting properly closed off or ducted to brakes the front bumper and lower air dam holds a lot of built pressure in resulting in damage to the air dam as well as bumper and other components related to the front end mounting as there is not where for the built up air pressure to escape or evacuate.****

Since 1999, APR Performance has been a market leader in producing and manufacturing high quality aerodynamic car parts for the aftermarket automobile industry. Proprietary manufacturing processes utilizing pre-preg. carbon fiber composites help to produce products that are durable, lightweight, and of the highest quality. APR manufactures Carbon Fiber Products for Racing and Street Applications. When you are in the market for a top quality aftermarket performance part you want a product you can trust and one that is the consummate addition to your preeminent machine. You'll want to consider the phenomenal offers from a company like APR Performance that has been in the aftermarket industry since 1999 and whose entire product line is track tested under extreme conditions assuring their products are suitable for the road or the track.

IMAGES: Images may be a representation and may not reflect the actual product.

Policies

California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov

California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.

Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.

FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.

IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.

TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.

SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.

Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.

Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.

Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.

Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.

Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.

Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.

APR Performance FA-603506 Lips & Splitter Review(s)

Other Popular Parts

Recently Viewed