These BBK Performance 1-7/8 Long Tube Exhaust Headers from LMPerformance will add more horsepower and torque to any Gen6 Chevrolet Camaro LT1 V8. BBK Camaro SS long tube headers are made with CNC mandrel bent 1-7/8 tubing for maximum exhaust flow that offer you additional horsepower and torque along with a great sounding American Muscle exhaust note.
Exhaust Flanges are designed and built using 3/8 thick steel to prevent warping and distortion due to heat. These new BBK Performance long tubes offer a new standard in performance, quality and value along with ALL the great features you would expect from the BBK Performance brand.
These chrome exhaust headers require a Short Mid Pipe kit to complete Installation; available separately with high flow steel substrate converters or off road race only versions.
Available in Polished silver ceramic or nickel chrome finishes.
Extract maximum power from your LT1 V8 powered 2016-2019 Camaro with these chrome BBK Performance full length headers. BBK Performance full length headers will increase your exhaust flow giving you additional horsepower and torque. These long tube headers will help give your engine a throaty exhaust note. The chrome plated finish adds some extra style to the engine bay.
BBK Performance full length Gen 6 V8 Camaro headers are made from 1-7/8 CNC-machined mandrel bent tubing with 3/8 thick die-stamped flanges. The full length primary tube design creates unrestricted and balanced airflow for ultimate horsepower gains. These headers are pressure tested to ensure leak free performance.
These full length headers are designed for easy installation with the required midpipe kit (40441 or 40442), however some minor cutting and welding of the factory pipes is required for installation. As with any long tube header installation, custom tuning is recommended for optimum results and to prevent check engine lights.
- Increased Exhaust Flow for Maximum Hosepower and Torque Gains
- Large 1-7/8 Primaries for Maximum Flow
- 16 Gauge Steel Tubing and 3/8 Thick Flanges
- Gaskets and Hardware Included
- Attractive Nickel Chrome Finish
- Requires Midpipe Kit 40441 or 40442 and O2 Wire Harness Extensions (Sold Separately)
- O2 Wire Harness Extensions Part# 1113 is required for ALL Automatic transmission applications only - 1 drivers side front - 1 drivers side rear
- O2 Wire Harness Extensions Part# 1122 Front Kit and Part# 11221 Rear Kit are required for all Manual Transmission applications.
- Minor Cutting and Welding Required for Installation
BBK has been designing high performance parts for cars since 1988 at unsurpassed quality levels. All their parts are directly bolted on with no modifications and are covered by full BBK manufacturer’s warranty. BBK exhaust headers feature the latest computerized machining equipment resulting in superior OEM quality products.
SSI Intake Manifolds . CNC Series Exhaust Headers, CNC Series Extracter X pipes & H Pipes, SpeedWare Stainless Exhaust Components, Power+Plus Throttle Bodies, Fuel Pumps & Fuel Regulators, Cold Air Induction Intake Kits, Performance Underdrive Pulley Kits. LMPerformance also carries BBK air filters, bushings and end links, caster/camber plates, clutch adjuster kits, cold air kits, fuel pumps, fuel rails and fuel regulators, gaskets, headers and intake manifolds, as well as pipes, springs and throttle bodies.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: CARB WARNING: LMPerformance will not ship any products (ie. Headers, Off-Road pipes, non-Carb Approved Intakes, etc...) that are not CARB approved to California. This only affects CARB related products such that affect car performance and emissions where CARB approval is required.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
*** EMISSIONS EPA NOTE: Not legal for use on pollution-controlled motor vehicles. For off-road use only.The use of long tube headers with aftermarket cats, powerflo-x, h-pipe, x-pipe, crossover pipes with or without aftermarket cats or aftermarket cats are illegal for installation and use on emission-legal vehicles when operated on public streets or highways. They can only be legally used while participating in sanctioned motorsports racing events.
Purchasing one of these items, you agree that the long tube headers with aftermarket cats, powerflo-x, hpipe, xpipe crossover pipes with or without aftermarket cats or aftermarket cats purchased from lmperformance are solely being used for sanctioned motorsports racing events, and when installing or re-selling headers with aftermarket cats, powerflo-x crossover pipes with aftermarket cats or aftermarket cats, the end consumer is being made aware of and agrees to these terms of use.
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
