New from StainlessWorks and LMPerformance! Gap your buddies on the track with an upgraded header system from Stainless Works. Port matched 1-7/8 long tube headers into 3 off-road or catted leads allow that supercharged V8 to breath. Featuring a lifetime warranty on the 304 stainless and TIG welded craftsmanship, these headers are instant bolt-on power your Trackhawk deserves.
Our TrackHawk Systems give you options to pick what's right for you, and make the setup as seamless as possible. Choose from catted or offroad header leads to suit your needs, and connect to the factory manifolds on either end or combine for a full Stainless Works system. Made to withstand grueling engine conditions, Stainless Works exhaust and downpipes are fabricated from 304 stainless steel, which not only resist corrosion, but is more durable than its aluminized steel or 409 stainless steel counterparts.
Factory Connect allows our headers or exhaust to connect to the factory exhaust or manifolds respectively. They connect to the factory location on either end or can connect to each other for a full Stainless Works system.
- 1-7/8 Primaries
- 3 dia Slip-Fit Connectors
- Catted or Off-Road leads
- Port-matched Flanges
- Increases Airflow & Maximizes Performance
- 304 stainless steel construction
- TIG welded for strength
- Mandrel bent (no buckling) for optimal flow
- Designed and Made in Chagrin Falls, Ohio, USA
LMPerformance offers the Stainless Works exhaust systems, Stainless Works turbo header, off road pipes and more. Our research shows Stainless Works stainless steel products are made from only the finest Everlast 304 stainless steel, which is a premium mil spec grade of stainless steel that is slightly more expensive than standard stainless steel materials. Stainless Works exhaust systems, and Stainless Works turbo headers will never red-rust like the cheaper 400 series stainless steel used by others.
Stainless Works is an industry-leader in stainless steel performance headers and exhaust systems. In addition to designing our wide range of after-market headers and exhausts, they manufacture them on-site, right here in the United States by skilled American craftsmen. LMPerformance is impressed that their systems have proven performance increases through pre and post-dyno testing of vehicles and are made in our country.
About Stainless Works Muffler Types: The S-Tube Muffler is a louder Muffler and More aggressive Muffler with a straight thru design. The Turbo Chambered Muffler Has and interior chambered design which gives a moderate volume and moderate aggressiveness.
IMAGES: Images may be a representation and may not reflect the actual product.
Limited lifetime warranty on 304 Stainless Steel products, except two years on Stainless Power products and catalytic converters. (Product must be returned for inspection.) Stainless Works is not responsible for coatings, labor, or shipping on defective or warranty items.
Contact Stainless Works for details. The Stainless Works Limited Lifetime Warranty is provided for automotive header and exhaust products made from 304 Stainless Steel which are designed and developed by the Stainless Works Engineering Group and manufactured by Stainless Works. The warranty covers material corrosion rust through and workmanship under normal usage by our customers. This warranty is extended to the original purchaser of the product sold directly through Stainless Works or an approved dealer.
Exclusions to this warranty include:
Products designed by others including product where any material type, thickness, product shape, brackets, hangers, etc. are defined by anyone other than Stainless Works.
- Racing applications of any kind
- Damage resulting from abuse including backfire, excessive heat or unusual corrosive conditions
- Product made from Aluminized Steel, Mild Steel, etc.(not Stainless Steel)
Warranty Claims shall be made by first contacting the Stainless Works Sales office and obtaining a Return Goods Authorization (RGA) number, before returning any item. You must provide a copy of the invoice or other proof of purchase that you purchased the product from Stainless Works or one of our approved dealers.
Please Inspect all packages upon receipt
Any problems (damaged goods, shortages or returns) must be reported within five days of receipt. Stainless Works can be reached at 1-800-878-3635.
Carrier-Related Damages?
Report any damages immediately to carrier. Work with carrier to file claim and pick up damaged carton with entire contents. (Do not ship directly back to Stainless Works). After claim has been filed, contact Stainless Works for reshipment (Within five days after receipt of order).
Shortages
Any shortages must be reported within five days of receipt. A copy of your invoice MUST be available when reported
Non Carrier-Related Damages
Any goods received damaged which you suspect is not carrier related, should be reported to us within five days after receipt of order. A copy of your invoice MUST be available when reported.
Fitment Issues
If you have a fitment issue, please contact Stainless Works first. Any modified products or those that have been run on a vehicle are non-returnable. All Stainless Works products are designed to fit stock configuration vehicles. For a vehicle with aftermarket components installed, additional fabrication may be required.
California Residents: CARB WARNING: LMPerformance will not ship any products (ie. Headers, Off-Road pipes, non-Carb Approved Intakes, etc...) that are not CARB approved to California. This only affects CARB related products such that affect car performance and emissions where CARB approval is required.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
*** EMISSIONS EPA NOTE: Not legal for use on pollution-controlled motor vehicles. For off-road use only.The use of long tube headers with aftermarket cats, powerflo-x, h-pipe, x-pipe, crossover pipes with or without aftermarket cats or aftermarket cats are illegal for installation and use on emission-legal vehicles when operated on public streets or highways. They can only be legally used while participating in sanctioned motorsports racing events.
Purchasing one of these items, you agree that the long tube headers with aftermarket cats, powerflo-x, hpipe, xpipe crossover pipes with or without aftermarket cats or aftermarket cats purchased from lmperformance are solely being used for sanctioned motorsports racing events, and when installing or re-selling headers with aftermarket cats, powerflo-x crossover pipes with aftermarket cats or aftermarket cats, the end consumer is being made aware of and agrees to these terms of use.
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
