* Images may be a representation and may not reflect the actual product.
AWE Tuning Mercedes-Benz C300 Sedan 2.0L Turbo W205 Touring Edition Exhaust, AWE Tuning Mercedes-Benz C200 Estate 2.0L Turbo W205 Touring Edition Exhaust, AWE Tuning Mercedes-Benz C300 Cabriolet 2.0L Turbo W205 Touring Edition Exhaust, AWE Tuning Mercedes-Benz C300 Coupe 2.0L Turbo W205 Touring Edition Exhaust
AWE Tuning Mercedes-Benz W205 C300 Touring Edition Exhaust
Group GRP-EXH-MBW205C301 Description
The Options
W205 C300 SwitchPathExhaust
Valve open for aggression, valve closed for sophistication. All via AWE Tuning's custom designed SwitchPathRemote. Easy.
Equipped with a 180 Technology resonator in the midsection, a valved straight section on the driver's side and a muffler on the opposing passenger's side in the rear, the AWE Tuning SwitchPathExhaust is capable of changing soundtracks instantly with the touch of a button. Drone-free mood control.
W205 C300 Touring Edition Exhaust
The W205 C300 Touring Edition Exhaust features AWE Tuning's proprietary drone-canceling solution, 180 Technology, enabling the perfect tone, minus drone - delivering the ultimate mix of performance and refinement out of the C300's 2.0T engine. A direct bolt-on, straight-through design, the Touring Edition Exhaust delivers a civil, smooth soundtrack throughout the range while providing an enhanced in-cabin driving experience.
Sound Perfection: AWE Tuning 180 Technology
As exhaust gases exit the W205 C300 engine and flow into the AWE Tuning 180 Technology equipped resonators, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves rejoin the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies. More on AWE Tuning 180 Technology in the tab above.
What's in the box?
Complete AWE Tuning SwitchPathor Touring Edition Exhaust, and all required hardware. Factory tips are re-used.
Search Terms: 3015-31014, 3025-31038
Presenting the AWE Tuning Mercedes-Benz W205 C300 Exhaust Suite:
AWE Tuning Mercedes-Benz W205 C300 Exhaust Suite Dyno Test
Below are comparison dyno tests as performed on our Mustang MD-500-SE AWD dyno.
Crank Horsepower Gains for the AWE Tuning Mercedes-Benz W205 C300 Exhaust Suite
Wheel Horsepower Gains for the AWE Tuning Mercedes-Benz W205 C300 Exhaust Suite
Download Installation Instructions: Installation Instructions for AWE Tuning Mercedes-Benz W205 C300 Exhausts
Fitment: Mercedes-Benz C300 Sedan 2.0L Turbo 4MATIC AWD Automatic
AWE Tuning Mercedes-Benz C300 Sedan 2.0L Turbo W205 Touring Edition Exhaust, AWE Tuning Mercedes-Benz C200 Estate 2.0L Turbo W205 Touring Edition Exhaust, AWE Tuning Mercedes-Benz C300 Cabriolet 2.0L Turbo W205 Touring Edition Exhaust, AWE Tuning Mercedes-Benz C300 Coupe 2.0L Turbo W205 Touring Edition Exhaust
Check out the entire range of performance products from AWE Tuning
Shop more C-Class Catbacks
Shop other C-Class Parts
History and information about AWE Tuning and their products.
AWE Tuning Exhaust had its start in 1991 and has the facilities needed to do everything in house assuring you of a first rate product. Their unique products like the SWITCHPATH AWE Exhaust System for your Porsche is designed to direct exhaust gasses away from the side mufflers giving you that impressive AWE exhaust touring tone only slightly louder and then with the “SWITCHPATH” valve open your exhaust gasses are directed away from the side muffler and you get that more aggressive sound.
Start at the original place of purchase. 100% of claims start with the original place of purchase, and all refunds, if granted, are through the original place of purchase. Call them first.
If you remove, we can not approve. If a product issue is discovered after installation, do not remove the product before receiving confirmation of a return approval from the original place of purchase. On-car information can often lead to diagnosis and action plans; AWE requires a chance to address in this manner. Post-install products removed prior to return authorization will be denied any warranty claim.
Any alterations or attempts to fix will void the warranty. This includes welding, bending, or any ad-hoc methods that alter the product in any way.
All warranties are for the original owner only. Second owners can purchase replacement components at a discount, directly from AWE or from participating dealers.
Manufacturer defect is defined as any characteristic of the product which hinders its usability for the purpose for which it was designed and manufactured. The warranty against manufacturer defects doesn’t cover any cosmetic changes, or normal use wear and tear. All warranties cease at a product’s discontinuance. Here’s a quick summary of our products and how long each is covered for manufacturer defects: All AWE brand products. Please note that special order items are not returnable.
All durations start at the time of purchase (we’ll ask for a proof of purchase date):
AWE brand exhausts: Tubing, welding, flex areas: Lifetime
Valves on exhausts: Three-years on mechanical components, one year on valve motors
Electronics / Electronic Components found on any product: One year*
Catalysts: One Year
Tip finish defects (please follow washing instructions prior to contacting support): One year (see Tip Finish below)
Intakes (all components): One year
Filters: One year
Intercoolers: One year
Other: Foilers, accessories, tools, valances, drive train stabilizers, suspension components: One year
Turbo kits/turbochargers: Not covered under warranties, special order item.
In the event of a return, a product must be returned with no signs of abuse, incorrect installation, forced installation, motorsports usage, or product altering whatsoever. Any trace of the aforementioned will result in warranty denial.
AWE's One Year Tip Finish Warranty covers defects on AWE tips for a period of one year from purchase date. Exclusions to the AWE One Year Tip Finish Warranty: (1) Pinhole sized pitting on the inside of tips, which is considered normal wear and tear, and (2) Blemishes or marring of appearance due to weather, road hazards, lack of maintenance (defined in next sentence) or extremes of heat or cold. Thorough periodic cleaning of AWE tips is required as general maintenance, and must be done prior to submitting a warranty claim on tips, as returned tips found to have been dirty (and not defective) will have forfeited any core charges.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Below are other popular parts other customers have purchased for their Mercedes Benz C-Class.