Product Description
AWE Tuning Audi S4 Avant 3.0T B8.5 3.0T S-FLO Intake, AWE Tuning Audi S4 Sedan 3.0T B8.5 3.0T S-FLO Intake, AWE Tuning Audi S5 Cabriolet 3.0T B8.5 3.0T S-FLO Intake, AWE Tuning Audi S5 Coupe 3.0T B8.5 3.0T S-FLO Intake
AWE Tuning Audi S4 Avant 3.0T B8.5 3.0T S-FLO Intake, AWE Tuning Audi S4 Sedan 3.0T B8.5 3.0T S-FLO Intake, AWE Tuning Audi S5 Cabriolet 3.0T B8.5 3.0T S-FLO Intake, AWE Tuning Audi S5 Coupe 3.0T B8.5 3.0T S-FLO Intake
AWE Tuning 3.0T S-FLO Intake
Group 2013-30T-SFLO-group Description
(Group Description Refers to the Part Number Suite That May Contain More Then The Items On This Page, It is Intended for Reference Information Only and for Those Who Purchase the Part Numbers Below.)
The AWE Tuning 3.0T S-FLO Intake was engineered in house to draw in large volumes of cool air to produce impressive power gains. The S-FLO Intake is now available as full S-FLO Carbon Intake, or ala carte as S-FLO Intake or S-FLO Filter.
S-FLO Carbon Intake: The full package
The AWE Tuning S-FLO Carbon Intake is the full kit including all carbon, the full intake, filter and our engineered Nomex® reinforced silicon hose, and all necessary brackets and mounting hardware.
Why it works
Ambient air is drawn into the inlet in a ram-air fashion and fed beneath the S-FLO's carbon cover. The inlet provides the airbox with constant cold air, compared to an air intake that draws air from the hot engine bay. This cold air results in impressive power gains when filtered through the AWE Tuning S-FLO Intake.
Component details follow.
S-FLO Intake
The AWE Tuning S-FLO Intake was engineered to improve the 3.0T's ability to draw in cool air while creating impressive power gains.
The AWE Tuning 3.0T S-FLO Intake uses a high flow, 4-ply Nomex®, fluorosilicone lined, steel wire reinforced silicon air tube to replace the restrictive factory hose. This high flow silicone tube allows cool air to travel freely to the motor. This specifically designed hose is engineered to have optimal flow geometry through the inlet, center section, and outlet of the tube. Furthermore, the silicone hose utilizes a molded lip to ensure a proper seal on both the S-FLO carbon air box (or factory airbox) and throttle body for longevity and reliable performance.
The S-FLO Intake includes all necessary installation hardware, and the proprietary S-FLO Filter, detailed below.
S-FLO Filter
The AWE Tuning 3.0T S-FLO Intake uses the proprietary S-FLO Filter. This is a washable, oiled, large cylindrical filter that has been tested to allow up to 34% more airflow than the factory paper filter. The S-FLO Filter is the largest filter that can fit within the air box.
The entirety of the S-FLO line up was designed and tested on AWE Tuning in house vehicles, and are cost effective, incredibly attractive upgrades.
Please note, AWE Tuning S-FLO Intakes are for racing use only.
Search Terms: 2710-11010, 2660-13010, 2660-13026
- Available as full S-FLO Carbon Intake, or ala carte as S-FLO Intake (no carbon) or S-FLO Filter.
- Perfect fitment, perfectly engineered
- Engineered and tested in-house at AWE Tuning
- Max gains: +15 hp and +11 tq at the crank @ 7000rpm with the S-FLO Intake
- Mounts in the factory location for a sleek OEM look
- Perfect Fitment - Guaranteed
Below are dyno comparison tests performed on our Mustang MD-500-SE AWD dynamometer. All tests were performed using our B8 S4 6speed, with controlled ambient conditions.
Crankshaft Horsepower Gains for the AWE Tuning 3.0T S-FLO Intake
Wheel Horsepower Gains for the AWE Tuning 3.0T S-FLO Intake
(Above) Adding the AWE Tuning 3.0T S-FLO Intake results in substantial power gains over the factory system. Gains of +9 wheel hp and +5 wheel tq were made using stock software. This results in gains of +10 crank hp and +6 crank tq. Maximum gains of +15 crank hp and +11 crank tq are seen at 7000 rpm.
Pressure Drop Testing for the AWE Tuning 3.0T S-FLO Intake
(Above) shows the pressure drop of the AWE Tuning 3.0T S-FLO Intake (one using just the S-FLO filter, the other using the complete system) vs. the factory air box and filter. Less restriction is represented by a pressure drop close to zero. It can be seen that the S-FLO filter is less restrictive than the stock filter and the AWE Tuning 3.0T S-FLO Intake system is far less restrictive than the factory air box and filter.
Flow Bench Testing for the AWE Tuning 3.0T S-Filter
(Above) Is data from flow bench testing of the AWE Tuning S-FLO filter in comparison to the stock filter. It can be seen that our S-FLO filter is capable of flowing 330.3 cubic feet per minute (CFM) compared to the stock filter's 246.7 CFM in almost identical conditions. This increase in flows results in an increase in power.
Download Installation Instructions: Installation Instructions for the AWE Tuning 3.0T S-FLO Intake
Download Installation Instructions: Installation Instructions for the AWE Tuning 3.0T S-FLO Carbon
Fitment: Audi S5 Coupe 3.0T Quattro Manual
AWE Tuning Exhaust had its start in 1991 and has the facilities needed to do everything in house assuring you of a first rate product. Their unique products like the SWITCHPATH AWE Exhaust System for your Porsche is designed to direct exhaust gasses away from the side mufflers giving you that impressive AWE exhaust touring tone only slightly louder and then with the “SWITCHPATH” valve open your exhaust gasses are directed away from the side muffler and you get that more aggressive sound.
IMAGES: Images may be a representation and may not reflect the actual product.
AWE Tuning Warranty Policy
Start at the original place of purchase. 100% of claims start with the original place of purchase, and all refunds, if granted, are through the original place of purchase. Call them first.
If you remove, we can not approve. If a product issue is discovered after installation, do not remove the product before receiving confirmation of a return approval from the original place of purchase. On-car information can often lead to diagnosis and action plans; AWE requires a chance to address in this manner. Post-install products removed prior to return authorization will be denied any warranty claim.
Any alterations or attempts to fix will void the warranty. This includes welding, bending, or any ad-hoc methods that alter the product in any way.
All warranties are for the original owner only. Second owners can purchase replacement components at a discount, directly from AWE or from participating dealers.
Manufacturer defect is defined as any characteristic of the product which hinders its usability for the purpose for which it was designed and manufactured. The warranty against manufacturer defects doesn’t cover any cosmetic changes, or normal use wear and tear. All warranties cease at a product’s discontinuance. Here’s a quick summary of our products and how long each is covered for manufacturer defects: All AWE brand products. Please note that special order items are not returnable.
All durations start at the time of purchase (we’ll ask for a proof of purchase date):
AWE brand exhausts: Tubing, welding, flex areas: Lifetime
Valves on exhausts: Three-years on mechanical components, one year on valve motors
Electronics / Electronic Components found on any product: One year*
Catalysts: One Year
Tip finish defects (please follow washing instructions prior to contacting support): One year (see Tip Finish below)
Intakes (all components): One year
Filters: One year
Intercoolers: One year
Other: Foilers, accessories, tools, valances, drive train stabilizers, suspension components: One year
Turbo kits/turbochargers: Not covered under warranties, special order item.
In the event of a return, a product must be returned with no signs of abuse, incorrect installation, forced installation, motorsports usage, or product altering whatsoever. Any trace of the aforementioned will result in warranty denial.
AWE's One Year Tip Finish Warranty covers defects on AWE tips for a period of one year from purchase date. Exclusions to the AWE One Year Tip Finish Warranty: (1) Pinhole sized pitting on the inside of tips, which is considered normal wear and tear, and (2) Blemishes or marring of appearance due to weather, road hazards, lack of maintenance (defined in next sentence) or extremes of heat or cold. Thorough periodic cleaning of AWE tips is required as general maintenance, and must be done prior to submitting a warranty claim on tips, as returned tips found to have been dirty (and not defective) will have forfeited any core charges.
Policies
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
AWE Tuning 2660-13010 Cold Air Intake Review(s)
Other Popular Parts
Recently Viewed
Starting at 0% Order Now, Pay Later Learn More.
