• Tanabe Toyota Yaris 5- Door Sustec DF210 Lowering Springs 1.6 / 2.1 TDF121

    Tanabe TDF121 | Toyota Yaris 5- Door Sustec DF210 Lowering Springs 1.6 / 2.1; 2009-2010

    * Images may be a representation and may not reflect the actual product.

    Have a question about this part?

    Contact Us


    • $399.00
      FREE Shipping
      (Lower 48 States)



    • SPECIAL ORDER

    • QUANTITY:
    • + Add to Wish List

Product Description

Tanabe Scion xD Sustec DF210 Lowering Springs 1.9 / 2.2, Tanabe Toyota Yaris Hatchback Sustec DF210 Lowering Springs 1.6 / 1.8, Tanabe Toyota Yaris Sedan Sustec DF210 Lowering Springs 2.0 / 2.1, Tanabe Toyota Yaris 5- Door Sustec DF210 Lowering Springs 1.6 / 2.1

Tanabe Scion xD Sustec DF210 Lowering Springs 1.9 / 2.2, Tanabe Toyota Yaris Hatchback Sustec DF210 Lowering Springs 1.6 / 1.8, Tanabe Toyota Yaris Sedan Sustec DF210 Lowering Springs 2.0 / 2.1, Tanabe Toyota Yaris 5- Door Sustec DF210 Lowering Springs 1.6 / 2.1


Spring Specifications:
Springs Lowering F/R: 1.6 / 2.1 (Inches)
Spring Rate F/R: 3.0 / 2.2 (kg/mm)

Tanabe Sustec DF210 coil springs offer a large drop, while retaining superb ride quality. The spring is raised 10-15% to compensate for the shortened amount of suspension travel, without over-stiffening the spring rate and affecting ride quality ans shocl life span. The DF210 os unique in that it provides an excellent range of benefits, from its extremely low stance, to performance and comfort. Overall, the DF210 is extremely well balanced for those looking to lower their car, increase handling, and maintain comfort.

All of our coil springs feature SUSTEC 210 Technology. SUSTEC 210 TEchnology is a series of manufacturing methods developed to create a stronger, thinner, and lighter spring using only high tensile steel, without adding additional elements that could affect quality, durability, or price.

210 Stands for 2100n/m of tensile strength, which is the highest strength ever acheieved in a coil spring and used in Tanabes Shiga factory in Japan.

Tanabe Springs are known by various race teams in Japan for their impressive performance on the circuit. In the JGTC GT500 class, our springs were used in the Takata Dome Racing Honda NSX. Tanabe Springs are some of the strongest springs available for automotive use (2100n/m) and are created using some of the most advanced methods and machinery in the world. We are one of the only manufacturers who have obtained the world quality manufacturing certification ISO9001.

Notes: Spring Rate (kg/mm) / Down Data (inches) *Lowering data may differ slightly with each application

TANABE: Made in Japan, made in Tanabe. Considerable effort goes into the research and development of our race derived products. Tanabe takes great measures during R&D, pre-production, production, and post production to ensure that each individual product we produce is of the highest quality in the industry. Everything is produced in-house under strict quality control at the Tanabe factory in Shiga, Japan. Our factory and production methods are ISO9001 (International Standard Organization) and JISQ9001 certified since the beginning of the millennium taking the standards of automotive performance to new heights. By never compromising on quality, performance potential is unlimited. Their product lines include Sustec suspension systems, Tanabe coilovers, lowering springs, and Tanabe Medalion exhaust systems.

IMAGES: Images may be a representation and may not reflect the actual product.

Tanabe Warranty Policy

We warrant all of our parts against defects in materials or workmanship under normal use and service after proper installation, (subject to the conditions and exclusions described below) for a period of one (1) year from the original consumer's date of purchase. During the warranty period, we will, at our option, repair or replace the defective part or refund your money. This warranty does not cover labor reimbursement. This warranty is non-transferrable. Replacement parts are warranted from the date of exchange for a period of one (1) year. The following is a non-exclusive list of examples that are not considered defects: failure due to accident or collision, chemical fallout, salt, hail, or other environmental conditions including natural disasters; improper installation, self-installation, or modification of the part; vehicles under manufacturer's recall for a related problem; and misuse or abuse, including off-roading or racing. Due to the racing nature, and extremely high amounts of stress that are placed upon the suspension and drivetrain, Tanabe will honor this warranty on the DRIFT line of products only prior to installation.

THIS WARRANTY DOES NOT COVER INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES SUCH AS PHYSICAL INJURIES OR PROPERTY DAMAGE, LOSS OF TIME, LOSS OF USE OF THE VEHICLE, INCONVENIENCE, RENTAL VEHICLE CHARGES, TOWING CHARGES OR ACCOM-MODATIONS RESULTING FROM A DEFECT IN OR FAILURE OF THE PART. THIS WARRANTY REPRESENTS THE EXCLUSIVE REMEDY FOR ANY PRODUCT DEFECT OR FAILURE AND TANABE USA, INC. MAKES NO OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY WARRANTY OF MERCHANTABILITY, CONDITION OF ANY KIND, OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimers of implied warranties, and in those states any implied warranty that may apply is limited to one year. If any provision of the warranty should be deemed invalid or unenforceable, the remaining terms and provisions of the warranty shall remain in full force and effect.

To file a claim:

You must obtain a Return Authorization from the original place of purchase prior to returning parts for inspection for defects. Returns must accompany the original consumer's sales receipt. The R.A. number must be written on the outside of the carton to be returned. Any carton without a proper R.A number will be refused. An R.A. does not guarantee repair, replacement or refund, only that Tanabe will inspect the parts for defects. Returns must be sent by pre-paid freight.

Notice:

Warranty is not applicable to the 4.9 LSU Bosch sensor for the Revel VLS Wideband Air/Fuel Ratio Gauge.

Policies

(Images May Not be Vehicle Specific. For Display Purposes Only.)

California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov

California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.

Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.

FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.

IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.

TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.

SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.

Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.

Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.

Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.

Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.

Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.

Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.

Tanabe TDF121 Lowering Spring Review(s)

Other Popular Parts

Recently Viewed