• Exedy Stage 2 Cerametallic Clutch Kit NISSAN 240SX ALL ALL; w/ SR20DET Swap; Thick Disc 06950B

    Exedy 06950B | Stage 2 Cerametallic Clutch Kit NISSAN 240SX ALL ALL; w/ SR20DET Swap; Thick Disc; 1989-1994

    * Images may be a representation and may not reflect the actual product.

    Have a question about this part?

    Contact Us


    • $428.08
      FREE Shipping
      (Lower 48 States)


    • IN STOCK

      * Ships within 24hrs

    • QUANTITY:
    • + Add to Wish List

Product Description

Exedy Stage 2 Cerametallic Clutch Kit NISSAN 240SX ALL ALL; w/ SR20DET Swap; Thick Disc, Exedy Stage 2 Cerametallic Clutch Kit NISSAN 240SX ALL ALL; w/ SR20DET Swap; Thick Disc, Exedy Stage 2 Cerametallic Clutch Kit NISSAN SILVIA L4 2; 5Spd Trans.; Thick Disc, Exedy Stage 2 Cerametallic Clutch Kit NISSAN SILVIA L4 2; 5Spd Trans.; Thick Disc, Exedy Stage 2 Cerametallic Clutch Kit NISSAN SILVIA L4 2; From 3/99 Prod.; 6Spd Trans.; Thick Disc

Exedy Stage 2 Cerametallic Clutch Kit NISSAN 240SX ALL ALL; w/ SR20DET Swap; Thick Disc, Exedy Stage 2 Cerametallic Clutch Kit NISSAN 240SX ALL ALL; w/ SR20DET Swap; Thick Disc

Item: Stage 2 Cerametallic Clutch; Thick Disc

Model Trim: ALL

Engine: ALL

Vehicle Notes: w/ SR20DET Swap

Fuel Type: ALL

Item Weight: 16.3

SPECS: Clamp Load: 1765; Disc Diameter (Inches): 9.4; Disc Diameter (Millimeters): 240; Spline Count: 24; Spline Size (Inches): 1; Spline Size (Millimeters): 25.6; Torque Capacity (ft/lbs.): 275

EXEDY cerametallic clutches are designed to handle the abuse of high power modified engines. Our cerametallic friction material can handle much more abuse than stock type disc assemblies without slipping and fading.

All EXEDY Stage 2 cerametallic clutch discs have sprung center dampers to reduce the impact and shock loads transmitted through the drivetrain. We offer two types of cerametallic discs, “thick” and “thin” along with a cushion button disc.

Thick Disc The “thick” discs have better heat capacity and therefore better durability in demanding applications. Even with the “thick” disc, our three and four puck designs typically have less inertia than a stock disc and work well for street, rally and track use.

Thin Disc The “thin” discs offer greatly reduced inertia to improve shift effort, allow for quicker shifting, and improve synchro durability. These discs are approximately 1/2 the thickness of a stock disc and are recommended for circuit track use only.

Cushion Button Disc The remarkable Cushion Button Disc combines cerametallic button facing with marcel cushion springs to maintain comfortable driving while supporting a respectable amount of power. It’s smooth engagement is ideal for the street, and thanks to its heavy duty sprung hub dampening assembly, can handle the power of high torque motors. The Cushion Button Disc is currently available for limited applications, however more fitments will be released in the near future.

Clutch Cover These clutch covers are designed to achieve a clamping load that is approx. 40% higher than the genuine part allowing a higher torque transmitting capacity. Ductile material is used for all pressure plates and, high burst strength can be achieved in all temperature ranges.

All EXEDY Racing Stage Ceremetallic Clutch Kits carry SFI 1.1 Certification. Which means, when you buy these products, you can be confident they are certified for use in competitive motorsports.

PLEASE NOTE: All referenced torque ratings are measured at the wheels.

Exedy Stage 2 Cerametallic Clutch Kit NISSAN 240SX ALL ALL; w/ SR20DET Swap; Thick Disc, Exedy Stage 2 Cerametallic Clutch Kit NISSAN 240SX ALL ALL; w/ SR20DET Swap; Thick Disc, Exedy Stage 2 Cerametallic Clutch Kit NISSAN SILVIA L4 2; 5Spd Trans.; Thick Disc, Exedy Stage 2 Cerametallic Clutch Kit NISSAN SILVIA L4 2; 5Spd Trans.; Thick Disc, Exedy Stage 2 Cerametallic Clutch Kit NISSAN SILVIA L4 2; From 3/99 Prod.; 6Spd Trans.; Thick Disc

EXEDY OEM Replacement Clutch Kits and Replacement Parts: EXEDY is a Tier 1 OEM supplier to all major automotive, and off-highway manufacturers across the globe. This means we work hand in hand to engineer products to exact specifications and requirement as set forth by the manufacturer.

Product Lines from EXEDY Include: OEM Clutches, Sport Clutches, Stage 1 Organic, Stage 2 Cerametallic, Hyper Single Series, Hyper Multi Series, Hyper Compe Series, Hyper Carbon Series, Hyper Builder Series, Hyper Twin Series, Hyper Triple Series, Lightweight Flywheels, Replacement Parts.

EXEDY Globalparts Corporation has evolved from the business known as Daikin Clutch Corporation. All EXEDY clutches still carry the famous Daikin winged logo. The US business was established in 1967 and EXEDY/Daikin products have been manufactured in the US since 1988 for both OEM and the Aftermarket.

Sport Racing Clutch Kits from Exedy are for engineered to optimize the performance of vehicles from mildly modified to Race Cars.

EXEDY Stage 1 Organic Racing Clutches only use premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modified engines.

EXEDY Racing cerametallic clutches are designed to handle the abuse of high-power modified engines. Our cerametallic friction material can handle much more abuse than stock type disc assemblies without slipping and fading.

The EXEDY Hyper Single Series clutch is engineered to optimize the performance of cars that are moderately modified, but do not require the clutch capacity of a multi-plate clutch. For high-powered applications, EXEDY offers twin and triple Multi-Plate clutches. These are designed for high power street action as well as drag, road and rally racing. The new standard for racing clutches is now available, with the EXEDY Hyper Compe Series. The ultralight metal multi-plate was developed with a focus on those interested in racing of all sorts.

The flagship model of EXEDY clutches, the Hyper Carbon Series. In 1995 EXEDY supplied carbon clutch products for use in the pinnacle series of motorsport; Formula One. This same technology is now applied to carbon clutches developed by EXEDY for use on the street and track.

EXEDY Racing Lightweight Flywheels combine low weight, low inertia and high thermal capacity for those looking for lighter weight and faster revs.

IMAGES: Images may be a representation and may not reflect the actual product.

Policies

California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov

California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.

Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.

FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.

IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.

TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.

SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.

Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.

Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.

Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.

Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.

Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.

Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.

Exedy 06950B Clutch Kits - Single Review(s)

Other Popular Parts

Recently Viewed