This is a custom model with an engine oil cooler on the left side.
Finish: Natural Finish
Core Design: Dual Row 1 inch Tubes
Cooler Option: Engine Oil Cooler
Port: TL/BR
DeWitt Radiator's DIRECT FIT aluminum radiators are designed to install into the stock mounting and use the factory connections without any modifications or adapters. The term DIRECT FIT gets thrown around a lot today. Many companies offer replacement radiators and most of them require some alterations, even when they claim they fit. Each DIRECT FIT radiator starts with a USA made core, furnace brazed in our own furnace. Our cores feature two rows of cooling tubes, serpentine fin and they are epoxy free. Press formed end tanks are manually tig welded by expert craftsmen, providing the ultimate in strength and appearance. Many companies build Corvette radiators, only one specializes in it. Quality Made in the USA!
Have you had the experience of steam pouring out of your car or maybe seen this happen to someone along the highway? Well you guessed it, a faulty radiator is the culprit and the team at DeWitts is here to make sure this never happens to your car. They realize that the radiator is an integral part of any car’s coolant system and this is especially true of a performance car that functions at top speeds. The friction that results from your car’s cacophony of moving parts is the miscreant in this case because friction results in excess heat energy. Lucky for you, this can all be avoided with a radiator from a reputable manufacturer and DeWitts fits the bill when it comes to a quality, dependable radiator.
Those owners who operate their cars at higher horsepower don’t have to worry because DeWitts understands heat load and they have test results on each radiator’s heat rejection and have published that rating comparing it to the factory unity. In the majority of cases DeWitts double row radiators are a 30% increase in heat rejection and that is no small gain and if you supplement this with an electric fan you can boost that number an additional 10%..You don’t have to worry about fit when it comes to a DeWitts radiator since they hold the official U. S. trademark for the term Direct Fit and this assures you that each and every DeWitts aluminum radiator is designed to specifically fit the listed application without the need for any modifications to your vehicle. As a bonus if you have a car that was manufactured after 1983 you will find that the DeWitts radiator are manufactured as double row radiators and consequently can hold one additional gallon of fluid over your factory installed radiator.
For those car aficionados who want even more cooling capability because of the demands of their particular driving situation the DeWitts radiators are available with 1.25 inch pipes providing approximately 10% additional cooling capability but remember a double row core, already on the radiator, is equal to a five row copper unit and is almost double the heat rejection of a single row aluminum unit. So you may find the 1.25 inch tubes totally unnecessary. An important thing to consider when choosing any product is where and how it is manufactured and you won’t go wrong with DeWitts because the aluminum radiators are made in the USA in Michigan where they can oversee 100% of the manufacturing process. They thought of quality of product first when they chose a CAB brazing furnace allowing them to produce a primo aluminum core second to none. Having fifteen years of experience building Direct Fit radiators beginning with Corvette radiators gives them a wealth of knowledge when it comes to product design and manufacturing. Give your high performance vehicle the cooling it needs for your high performance driving with a DeWitts radiator and see what a difference a cool engine can mean.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
