Spohn Performance Spohn Adj. Torque Arm - Trans. Mounted Firebird V8 399

Spohn Adj. Torque Arm - Trans. Mounted Camaro V8, Spohn Adj. Torque Arm - Trans. Mounted Camaro V8, Spohn Adj. Torque Arm - Trans. Mounted Firebird V8, Spohn Adj. Torque Arm - Trans. Mounted Firebird V8

Full length transmission mounted adjustable torque arm for the 1982-2002 F-Body.

Replace your flimsy factory torque arm with a durable Spohn tubular version and put the power where it belongs - the pavement! Built from 1.25 x .120 tubing with a heavy-duty 3/8 rear mounting bracket. Bolts directly in place of factory torque arm using all factory mounting locations. Requires no welding or drilling and clears all factory or aftermarket exhausts. Equipped with an adjuster for changing pinion angle and a new, low deflection polyurethane front bushing.

If you want serious performance, handling, and traction when you're at the dragstrip, AutoX, or road racing; then you need a Spohn Performance fully adjustable torque arm, here's what it'll do:

• Attaches to the rear axle and controls rear end torque during acceleration, transferring this energy into the tires, increasing straight line traction
• Reduces nose-dive during braking
• Eliminates wheelhop
• Increases sidebite during corner exit acceleration
• Bolt-on system does not require complete interior removal as with other kits
• No fabrication, welding or drilling required - 100% bolt-in installation!
• Provides adjustable pinion angle

Build Specifications:

• Constructed of 1.25 o.d. x .120 wall DOM (drawn over mandrel) seamless mild steel tubing
• Front stub of torque arm is reinforced by TIG welding a piece of 1 solid 4140 chrome moly into the i.d. of the front snub. This is the strongest transmission mounted torque arm on the market = bullet-proof!
• TIG welded 4130 chrome moly threaded tube adapters
• Heavy-duty 3/8 thick steel rear housing mounting plates
• Polyurethane bushing front mount for minimal road noise
• Grade 8 mounting hardware is supplied
• Front torque arm polyurethane bushing mount allows for fore and aft travel, as well as free rotational travel for bind-free performance
• Rear of torque arm mounts to the 3/8 thick steel rear housing mounting plates via two 3/4-16 NFT x 5/8 bore x 7/8 thick solid steel rod ends. These are solid rod ends, not spherical bearing rod ends, so noise is of no concern. Grade 8 - 5/8 bolts and 5/8 nylock nuts are supplied.
• Integral Pinion Angle Adjuster between the bottom rear solid rod end and the bottom rear torque arm tube allows for easy pinion angle adjustment. A simple turn of the wrench will give you 6 degrees of pinion angle adjustment, it's that simple.
• Entire package is a complete bolt-in assembly using existing mounting points on the vehicle. No drilling or welding is required!
• This is a proven product being run on some of the fastest F-Bodies in the country!
• Rear mounting bracket is designed to fit on the OEM rear or an aftermarket 12 bolt or Ford 9 rear
• Available powder coated red or black.
  

Fits Camaro and Firebird Models.

Spohn Performance commits itself to the design and manufacture of chassis and suspension parts and systems that deliver the highest level of quality, performance, attention to detail, and value.

With over 20 Years of Experience Spohn Performance's goal is to construct quality high performance components, and offer them to consumers at a fair price. Our entire operation revolves around that key word: Quality. We don't just say it, we practice it; all day, every day. When we do something, we do it right, or we don't do it! Our attention to detail is what has built our solid reputation, and will be the reason for our continued growth and success.

With a commitment to excellence in the design and construction of primo quality, Spohn chassis and suspension products opened in 1999 and has grown into a twenty-seven thousand foot facility located in Pennsylvania in the USA. The father and son owners both know the importance of dependable and long lasting chassis and suspension products and they are cognizant of the challenges inherent in the marketplace but not only that, they take pride in their product and want to give their customers the best possible product. SPOHN recognizes the importance of parts like the adjustable torque arm that attaches between the rear axle housing and the chassis and is needed to maximize rear grip and help with straight line traction, cornering and acceleration, always important but extremely important at the track and In inclement weather. SPOHN PERFORMANCE put their experienced team to work and developed products like the Cross member mounted and adjustable torque arm that can be easily installed because it is a bolt on system and provides an adjustable pinion angle and available for a potpourri of vehicles. Another indication of SPOHN’s innovation and impressive quality is their sui generis K Member designed to perform on even the toughest tracks by affording considerable savings in weight and at the same time assuring strength and rigidity to help the everyday driver with their driving demands. And for you Camaro racing aficionados who want to avoid torque steer and body roll at the starting line SPOHN developed the Pro-Drag racer anti roll sway bar that is much bigger in diameter and considerably stronger because it is manufactured with solid 4140 heat treated spring grade chrome moly steel coined as one piece and installation is a breeze with the bolt in installation. Another example of SPOHN’s innovation and thought to customer needs is the SPOHN Manual Rack & Pinion Kit that, unlike others, does not require you to have your spindle hole drilled out for the rod end to spindle adapters, and because it weighs considerably less than your car’s factory heavy power steering rack, pup and shed you will give yourself an extra edge on the track or in other performance driving venues. Check out these and the potpourri of other performance products by the unparalleled SPOHN and get the suspension part that will help you win the race at a competitive price at LMPERFORMANCE.

IMAGES: Images may be a representation and may not reflect the actual product.