Spohn Lower Control Arm Relocation Brackets - Moser Rear Camaro V8 / V6, Spohn Lower Control Arm Relocation Brackets - Moser Rear Firebird V8 / V6
Spohn Lower Control Arm Relocation Brackets - Moser Rear Camaro V8 / V6, Spohn Lower Control Arm Relocation Brackets - Moser Rear Firebird V8 / V6
NEW DESIGN - These new Part #210-M LCA Relocation Brackets are designed to be an exact fit on any Moser Engineering 12 bolt or 9 rear housing.
Repositions your instant center by lowering your control arm angle for increased traction and anti-squat. Lowers rear of control arm up to 3.
This product is a must for lowered vehicles to correct your suspension geometry. Lowering your vehicle alters the LCA angle putting the rear of the LCA higher than the front of the LCA, this causes massive wheel hop and traction loss.
NON-LOWERED vehicles will also see a dramatic increase in traction by lowering the rearward angle of the LCA with our relocation brackets. The lower mount holes are placed in the arc pattern of the OEM length LCA. Therefore allowing a non-lowered F-Body to drop the rear LCA angle and NOT require a longer than OEM LCA. All geometry is correctly maintained. The anti-squat performance is providing most users with a full .10 or better 60' reduction!
Brackets are Laser-Cut from 3/16 cold rolled steel using state-of-the-art CAD/CAM technology for precision tolerances.
Must be welded into place. All Grade 8 hardware is included. Since the brackets must be welded in place, we ship them bare. Weld in LCA Relocation Brackets are the only SAFE and EFFECTIVE way to install them.
Fits Camaro and Firebird Models.
Spohn Performance commits itself to the design and manufacture of chassis and suspension parts and systems that deliver the highest level of quality, performance, attention to detail, and value.
With over 20 Years of Experience Spohn Performance's goal is to construct quality high performance components, and offer them to consumers at a fair price. Our entire operation revolves around that key word: Quality. We don't just say it, we practice it; all day, every day. When we do something, we do it right, or we don't do it! Our attention to detail is what has built our solid reputation, and will be the reason for our continued growth and success.
With a commitment to excellence in the design and construction of primo quality, Spohn chassis and suspension products opened in 1999 and has grown into a twenty-seven thousand foot facility located in Pennsylvania in the USA. The father and son owners both know the importance of dependable and long lasting chassis and suspension products and they are cognizant of the challenges inherent in the marketplace but not only that, they take pride in their product and want to give their customers the best possible product. SPOHN recognizes the importance of parts like the adjustable torque arm that attaches between the rear axle housing and the chassis and is needed to maximize rear grip and help with straight line traction, cornering and acceleration, always important but extremely important at the track and In inclement weather. SPOHN PERFORMANCE put their experienced team to work and developed products like the Cross member mounted and adjustable torque arm that can be easily installed because it is a bolt on system and provides an adjustable pinion angle and available for a potpourri of vehicles. Another indication of SPOHN’s innovation and impressive quality is their sui generis K Member designed to perform on even the toughest tracks by affording considerable savings in weight and at the same time assuring strength and rigidity to help the everyday driver with their driving demands. And for you Camaro racing aficionados who want to avoid torque steer and body roll at the starting line SPOHN developed the Pro-Drag racer anti roll sway bar that is much bigger in diameter and considerably stronger because it is manufactured with solid 4140 heat treated spring grade chrome moly steel coined as one piece and installation is a breeze with the bolt in installation. Another example of SPOHN’s innovation and thought to customer needs is the SPOHN Manual Rack & Pinion Kit that, unlike others, does not require you to have your spindle hole drilled out for the rod end to spindle adapters, and because it weighs considerably less than your car’s factory heavy power steering rack, pup and shed you will give yourself an extra edge on the track or in other performance driving venues. Check out these and the potpourri of other performance products by the unparalleled SPOHN and get the suspension part that will help you win the race at a competitive price at LMPERFORMANCE.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
