Anderson Composites Mustang Front Bumper Fiberglass GT350 Style AC-FB15FDMU-GR-GF

Items sold by Anderson Composites may not be legal for street use in all states. It is the buyerfs responsibility to comply with applicable state laws. Buyer understands that due to strict U.S. Federal and State safety crash guidelines, Anderson Composites is not responsible or liable for any damages or possible injuries incurred upon possible accidents due to driver error, incorrect installations, bad judgment, or act of nature/God, Allah, Jehovah, etc. All products are intended for off-highway uses only, and should be used for their intended purposes only. Anderson Composites does not take responsibility over buyer installation, modification, and unusual stress of the products. The buyer assumes all responsibilities for determining the suitability of the products. Anderson Composites is not responsible for any damages incurred either directly or indirectly on the vehicles or operators/passengers within the vehicles.

Customers in countries/regions outside of the USA should purchase Anderson Composites products from the Authorized Distributors in that region. Purchases made through non-official channels do not qualify for warranties.

Installation

All products require professional installation. Buyer understands that some products may require modifications for correct fitment. Minor adjustments may be necessary as part of the normal installation process. All carbon fiber products will not sustain heavy force or weight, for they could be cracked by such force or weight. Anderson Composites has made an effort to produce all its aftermarket products to fit the original factory vehicles as closely as possible. However, some occasional prepping may be necessary for an ideal fit. The buyer needs to perform these steps to his/her satisfaction before installation. If the buyer wishes to paint the products, he or she must pre-fit the parts to the vehicle before painting to ensure proper fit. There are absolutely no returns on painted products.

Hood Pins

All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins.

Heat Shields:

Anderson Composites requires the use of heat shields for all carbon fiber and fiberglass hoods. Heat shields help avoid pre-mature aging of the product.

Anderson Composites 6-Month Appearance Guarantee

The following situations are fully covered under the Anderson Composites 6-Month Appearance Guarantee: (Note that all Anderson Composites carbon fiber and fiberglass products are hand-made, and small imperfections are inevitable. Claims guilty of abusing Anderson Composites claims program will be denied immediately)

Heavy cloudiness under the clear finish (which is only visible under the sun. Anderson Composites apologizes for not being able to QC every product under natural sun light)

Clear finish bubble larger than 3/8 in diameter

Anderson Composites 6-Month Clear Finish Guarantee

The following situations are fully covered under the Anderson Composites 6-Month Clear Finish Guarantee: Clear finish changes color more than a full shade within 6 months (Note: like car paint, slight fading and discoloration is natural. The warranty only covers more extreme cases.)

Hood Pins: All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins.

Defective Products

All products require professional installation. Minor adjustments might be necessary. These are normal body work and installation steps. Therefore it is NOT considered to be defective. In addition, most carbon fiber products are hand-crafted, and no two items will be identical. Small imperfections such as wavy weaves, small bubbles, and clear finish blemishes are inevitable. Pictures are required to demonstrate true defects on products prior to return. See below for information on our return policy.

Shipping Damage

Anderson Composites packs all products carefully to prevent damage during shipping. However, damage may still occur occasionally. Buyer must inspect the packaging and the products carefully upon receiving them, then accept the shipment and notate any damages and irregularities, such as crushed, torn, punctured, or broken parts on both the packaging and the product, on the freight bill or receipt at the driverfs presence. Buyer must retain all cartons, packing materials, and damaged products for the carrierfs damage inspector to inspect. Do not refuse shipment or return it without approval, because the buyerfs right to make a damage claim may be denied. A signed receipt without any notation indemnified the carrier as well as Anderson Composites from any further damage claims. Discovery of damages after a clear delivery becomes the responsibility of the customer.

All damages must be notified to carrier and the dealer within 24 hours. In cases of damage with proper notation on receipt, the carrier will determine whether to pay for repair cost or replacement value of the damaged goods after damage inspection. Replacement value is the amount the buyer paid to the distributor and is not negotiable. All disputes about the settlement amount should be addressed with the carrier. Anderson Composites, under no circumstances, shall be liable for the damaged product or for subsequent settlement of the claim with the carrier.

California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov

California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.

Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.

FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.

IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.

TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.