Enter the world of turbo performance with Invidia Turbo Manifolds. Invidia Turbo Manifolds start with committed engineers developing a product that will extract the most possible power out of your engine. Invidia Turbo Manifolds are then constructed from SUS Stainless Steel before going thru a rigorous inspection process for consistent quality. After that, it's up to you whether to add this massive power added to your vehicle.
Invidia Exhausts feature available Titanium Burnt Blue Exhaust Tips as well as full Stainless Steel Full exhaust systems. Full Titanium systems are also available which reduce weight and add performance.
Invidia Exhausts feature a good balance of price and performance. Invidia offers the motorsport enthusiasts a strong line-up of exhaust systems. Each Stainless Invidia Exhaust is constructed with high quality SUS304 Stainless Steel, CNC-machined flanges, and manufactured with a polished finish. Each system features mandrel-bent stainless steel piping for maximum exhaust flow and reduced back pressure. These Invidia exhausts are engineered to produce strong mid- to top-end power gains, as well as an increase in horsepower and torque. Invidia catback exhaust systems are available with polished Rolled Tips, Straight Tips, and for that unique look Titanium Burnt Tips. Invidia also offers a free flowing Titanium Exhaust system for select vehicles which improves power, torque and response over the factory exhaust. Titanium is stronger and lighter than steel so this gives your car a better power to weight ratio helping to improve straight line performance and cornering. Titanium is also highly resistant to corrosion and rust.
INVIDIA is no newcomer to the high-performance exhaust industry, since they began manufacturing in the late 1980’s under the name RS*R with the expertise of the original owner and developer, himself a racer. The company mushroomed due to the increasing need for a primo exhaust system that could perform well under difficult racing conditions. Consequently, in 1998 INVIDIA opened a small manufacturing facility so that they could handle this challenge, becoming quite successful in this arena. Two things served as an impetus to the company to make some changes: their success in racing competitions and the overwhelming acceptance of its products. In 2001 the decision was made to bring their successful GT exhaust systems farther afield and make it available to everyone in the performance marketplace. Later, the G200 series exhaust was released following this successful endeavor. Quality of production was always paramount to INVIDIA and they were rewarded for their efforts in exceptional performance and durability when many exhausts were tested and approved by the German government KBA, the Federal Motor Transport Authority. Always anxious to improve upon what they had INVIDIA made a major decision to modernize their facilities with the latest in robotic machinery and mandrel bending machines to enable them to design and manufacture a totally different exhaust labeled the “Q-300” series.
Some examples of their dedication to improvement are the Invidia N1 BRZ, INVIDIA Turbo Manifolds for SUBARU IMPREZA 2005-2016, or the INVIDIA RSX DC5 EXHAUST MANIFOLD for your Acura. And for your dual exhaust vehicles like the INFINITI and NISSAN, the Gemini exhaust system has a muffler that is expertly designed for a deep rich tone, and since they are a cat back design they eliminate the need for existing piping after the catalytic converter. INVIDIA exhausts did not forget Toyota owners, but developed the INVIDIA SUPRA TURBO to meet performance needs with this cat-back system. Check out all the aftermarket performance Invidia exhausts for Acura, Infiniti, Lexus, Nissan, Toyota, Ford, Honda, Mazda, Mini, Mitsubishi, Scion, Subaru and Volkswagen on the LMPERFORMANCE website and find the Invidia catback exhaust that will increase your car’s performance and give you the melodious sound you can’t do without at a great price.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: CARB WARNING: LMPerformance will not ship any products (ie. Headers, Off-Road pipes, non-Carb Approved Intakes, etc...) that are not CARB approved to California. This only affects CARB related products such that affect car performance and emissions where CARB approval is required.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
*** EMISSIONS EPA NOTE: Not legal for use on pollution-controlled motor vehicles. For off-road use only.The use of long tube headers with aftermarket cats, powerflo-x, h-pipe, x-pipe, crossover pipes with or without aftermarket cats or aftermarket cats are illegal for installation and use on emission-legal vehicles when operated on public streets or highways. They can only be legally used while participating in sanctioned motorsports racing events.
Purchasing one of these items, you agree that the long tube headers with aftermarket cats, powerflo-x, hpipe, xpipe crossover pipes with or without aftermarket cats or aftermarket cats purchased from lmperformance are solely being used for sanctioned motorsports racing events, and when installing or re-selling headers with aftermarket cats, powerflo-x crossover pipes with aftermarket cats or aftermarket cats, the end consumer is being made aware of and agrees to these terms of use.
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
