Contents: (9) 18x 32 (9) 457mm x 812mm* pieces of Dynamat Xtreme. Use on rear decks, doors, floors and the floor of your trunk to get more bass, more music, lower road noise and better sound.
Stop fighting engine rumble, speaker rattle, road noise and buzzing vehicle parts! Apply Dynamat sound insulation to your vehicle's resonant surfaces and enjoy improved clarity, loudness and bass response from your car stereo. High-performance Xtreme is light-weight, requires no heat and is recommended for vehicle tops, sides and contoured areas. Xtreme is coated with aluminum for high temperature areas like firewalls and floors. Depending on your needs, you can choose Dynamat Xtreme in application-specific kits (pre-cut material in appropriately-sized pieces) or in sheets. Scroll down for specific information or use the link bar above to go directly to a Dynamat Xtreme product.
DYNAMAT manufactured by Dynamic Control and offered to LMPerformance.com's customers is a thin, flexible, easy to cut and mold sheet that actually stops noise causing resonance and vibration.
When a car operates, it generates noise caused by the transference of energy (vibration) from the internal components and from the road to the chassis. The car's chassis transforms this vibration into audible noise. DYNAMAT uses visco-elastic qualities that promote vibro-acoustic energy conversion making noise silent energy. Even a small amount of DYNAMAT can cause a profound noise reduction. DYNAMAT applied to the doors of your vehicle can reduce road noise from 3-6dB and complete coverage of an average vehicle can reduce road noise 9, 12 even as much as 18dB. Installing a DYNAMAT Trunk Kit can increase the Sound Pressure Level (SPL) bass output by 3db, depending on the type of vehicle and proper installation.
DYNAMAT can be applied in patches or over an entire area to form a sound barrier and vibrational damper. Too much heat coming from your exhaust or headers? Apply DYNAMAT Xtreme to the floor and firewall, then install DYNALINER, both underneath the floor's carpet.
DYNAMAT requires no special tools to install only razor knife or scissors, roller tool, rags and a solvent- based cleaner (rubbing alcohol also works and basic hand tools for the disassembly and reassembly of your vehicle.
Dynamic Control and lmperformace.com recommend applying DYNAMAT to any area you can reach in this order: Doors, Trunk, Rear Deck, Floors, Roof, Hood, then Fenders. DYNAMAT Xtreme can solve most vibration, noise and heat isolation problems.
DYNAMIC CONTROL has been in the business of taming unwanted noise and vibrations since as early as 1989 and their DYNAMAT products is the predominant player in the automotive arena when it comes to car audio and automotive acoustic solutions. With headquarters in Hamilton, Ohio, they have established a reputation that they can be proud of here in the United States and in over fifty other countries around the world with the multiplicity of sound dampening products in their resume. The DYNAMAT hood liner available at LMPERFORMANCE is just one example of the inimitable quality of their Dynamat products and their innovation in design with its ¾” acoustic sound soaker foam that is a compilation of cells that are both open and closed for the most effective control of unpleasant sound under your car’s hood. And in addition to that they used an aluminized bottom layer that could be cleaned and is also heat reflective and is an application that is simple to install with its superior adhesive. And if you are interested in a product that is light yet can provide incomparable thermal insulation DYNAMAT has created just the thing for you, the DYNAMAT DYNALINER with its thin single layer of synthetic foam that is packed with thousands of cells to be utilized as an insulating material almost anywhere.
* This is a universal item without fitment details. Please make sure this item is for your application. LMP does not guarantee fitment on universal items.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
