It’s been yrs in the making! This product was stillborn collecting dust on the back shelves of VR until customer demand and time caught back up to its need for further development for production. After hundreds of hours on the flow bench comparing the VR design to the very best the competition had to offer, we are proud to present the VR power duct for the C5 corvette.
This unit can be used with the VR B2 System, Blackwing, K&N and many more and use it you should, because the VR out flowed the very best by over 15% @ 28 inches of water and 20% @10 inches through the throttle body!
- Relocated MAF position- WE move the MAF closer to the motor for a cleaner read, a must for any heads cam or stroker motor cars.
- Superior quality in construction- Here we use a resin reinforced Crosslink Material that is set at a specified charge weight for strength and longevity, More expensive, yes, but 50% stronger than other systems.
- Full adjustability- this enables the unit to fit a wide range of intake and filter combinations so you can use the VR power duct even if you don’t have a VR-B2 system.
- Positive clamp rings front and rear
- Optional forced induction models available, capable of sustained boost levels of 18PSI@175deg
Features of the Power Duct:
- Relocated MAF position- WE move the MAF closer to the motor for a cleaner read, a must for any heads cam or stroker motor cars.
- Superior quality in construction- Here we use a resin reinforced Crosslink Material that is set at a specified charge weight for strength and longevity, More expensive, yes, but 50% stronger than other systems.
- Full adjustability- this enables the unit to fit a wide range of intake and filter combinations so you can use the VR power duct even if you don’t have a VR-B2 system.
- Positive clamp rings front and rear
- Optional forced induction models available, capable of sustained boost levels of 18PSI@175deg
Checkout the NEW Vararam Corvette C7 True Cold Air Intake!
If you would like to increase your engines performance by using some of the most efficient air induction systems on earth, LMPerformance is pleased to offer a line of Vararam air intakes and other products.
LMPerformance research has shown that ram air intake works by reducing the intake air velocity by increasing the cross sectional area of the intake ducting. When gas velocity goes down the dynamic pressure is reduced while the static pressure is increased. The increased static pressure in the plenum chamber has a positive effect on engine power, both because of the pressure itself and the increased air density this higher pressure gives.
Your vehicle can become a high-performance vehicle by installing one of our Vararam air induction systems which produce more Power and Torque, offering you more real world performance than any of the other intake system out there. Vararam claims to use the latest in aerodynamic technology and real world testing to produce intake components and parts.
The testing of the VARARAM Air Grabber and other VARARAM air intakes is not done in a hurry just to get the job done but rather is a time consuming and demanding process and usually takes up to a full year to be finalized because the evaluation process is only successful when it has evaluated an application’s restrictions and then reduced them successfully to zero, and after that VARARAM force feeds the engine or tunes the system to a particular application. By taking such care during this juncture in the total process VARARAM is able to increase the overall performance of a vehicle to its greatest potential and give you, the customer, a product that you will be happy with. Products like the VARARAM TRI-Power for your GM Truck and SUV, and something that has been lacking in the marketplace for some time, but after careful testing what began as an idea has finally come to fruition – a direct bolt on real ram air system. Forget about the old way of doing things with chopping, drilling and water ingestion and just bolt this baby on for a horsepower gain of anywhere from twenty-five to fifty, and no air meter issues with this product because it has a custom Tri-Power air filter by GREEN that uses air sensor safe oils; and best of all, it is available for your Avalanche, Escalade, Denali, Tahoe, GMC 1500 and 2500 trucks and Chevy 1500 and 2500 trucks. Own something a little smaller say a Corvette C-5, well LMPERFORMANCE and VARARAM thought of you too with the sui generis B2 system that has been evolving since it was first developed and performs as the record setting system it is, and the third time around is definitely a charmer for this performance addition with a retooled upper air box, an increased filter flange area that totally encapsulates the filter, improved box material and other improvements. And improvement is the name of the game when it comes to VARARAM as is evidenced by the Cold Air Super Street System VR for your Camaro that has been redesigned from the original version in order to remove the volume and manual adjustability and then came a tweaking of the cold start operation that was problematic in the Camaro until it was perfect.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
