MSD Superconductor 8.5mm Plug Wires for LS1 Camaro V8, MSD Superconductor 8.5mm Plug Wires for Camaro, MSD Superconductor 8.5mm Plug Wires for LS1, MSD Superconductor 8.5mm Plug Wires for LS1 Firebird V8
The MSD 8.5mm Super Conductor Wire is the performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) choke.
This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears.
MSD is not a newcomer to the aftermarket ignition system industry, having gotten its start back in 1970 and now part of the prestigious HOLLEY family, the recognized leader in the fuel system market for more than one hundred years and repeatedly represented in the most eminent races in the racing world. The company had it start in research and development attempting to create a lean burn fuel system that they named the ELECTRASONIC FUEL INDUCTION SYSTEM and they were hoping that with this they would be able to improve fuel economy but there was a problem with this discovery. The new system was too lean and it could not be ignited by the existing electronic ignitions and that led to the decision to start thinking about an entirely new ignition system using capacitive discharge that used capacitor discharge current to the coil to fire the spark plugs, originally designed to eliminate the long charging times required by high inductance coils. MSD used the problem at hand as an opportunity utilizing the capacitive discharge’s ability to spark multiple times, they designed primo ignitions using the high energy spark from the capacitive discharge to ignite their previously developed lean fuel mixture concurrently improving the engine in a multiplicity of other ways; such as better starting, smoother idle, less emissions and more power and thus started MSD on the road to success. Rather than being discouraged by their original problem and giving up they looked on it as a challenge and now can tout the fact that they are the ignition of choice of the top professional drivers in a potpourri of racing venues. MSD has grown over the years not only in reputation but in size as well with over four hundred employees and a top-of-the-line facility of more than one hundred fifty thousand square feet but they have never lost sight of their original goal to make your car’s engine perform better whether you are driving on the street or on the track. The MSD LT1 AIRFORCE Intake Manifold for your 2014-2016 Corvette C7 and your 2016 Camaro SS is just one example of the sui generis products from MSD with its exclusive bell mouthed runner entrance you will see not only an increase in airflow but a minimum of shrouding as well while contemporaneously making the best use of the plenum volume for an unobstructed flow path and it doesn’t get any better than that. And MSD didn’t forget about the small things that make a big difference in your Camaro’s performance but designed the Superconductor 835 Plug Wires with their inimitably low resistance so that you will experience less loss in spark plug energy and that means that the majority of the energy goes where it should – your car’s spark plug- and this all translates to a better performing engine. Peruse the parts below, including MSD plug wires and intake manifolds and choose the one that will improve your car’s performance at a competitive price.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
