Looking to improve the handling of your vehicle? Our ST Anti-sway Bars are the ideal solution. By upgrading the anti-sway bars you reduce the amount of body roll and ensure improved handling while providing better traction. ST Anti-sway Bars improve the driving dynamics of your vehicle and complete your suspension upgrade. Our ST Anti-sway Bars are made of cold-formed heavy duty aircraft steel. The reduction in the wheel load differential between the outer and inner wheel in a curve will be immediately noticeable. Depending on the vehicle, some of our ST Anti-sway Bars are adjustable to give you the freedom to fine tune the force and further improve your vehicles lateral stability and cornering grip. Our high performance ST Anti-sway Bars go through multiple quenching and tempering processes along with a final epoxy coating to maximize the protection from extreme weather and road debris. Not only do they look good, they are also built to last.
Due to the improved lateral control, reduced tendency for body roll, and the minimized load differences between the outside and inside the wheel in a turn; you will feel more direct handling when going into curves or with fast load changes.
Cold formed powder coated steel with quality hardware for maximum durability
ST Suspensions 2023+ Nissan Z Anti-Sway Bar Kit Rear
ST Suspensions Anti-Swaybar - Rear
Suspension Stabilizer Bar
Anti-Swaybar - Rear
Well before SUSPENSION TECHNIQUES and its sister company BELLTECH joined the impressive KW AUTOMOTIVE NORTH AMERICA, INC. in 2005 it was already on its way to becoming one of the leaders when it came to height adjustable coil-overs, lowering coil springs, and anti-sway bars but it also led to a name change from SUSPENSION TECHNIQUES to ST SUSPENSIONS. ST SUSPENSIONS formerly SUSPENSION TECHNIQUES can trace it history back to the 1980’s in Southern California, the perfect place for any company designing aftermarket suspension products because there were lowered vehicles all over Southern California by then. ST SUSPENSIONS (SUSPENSION TECHNIQUES) realized the market was ripe for new nonpareil products and went about the necessary task of designing and developing innovative products that would result in the company’s success in the marketplace. ST SUSPENSIONS (SUSPENSION TECHNIQUES) knew that the anti-sway bar in a vehicle prevented body lean when the vehicle is turning by applying force to the suspension on each side, upward on one side and downward on the other to resist leaning and they knew this was particularly important in a high performance vehicle and in a racing situation. The team at ST SUSPENSIONS (SUSPENSION TECHNIQUES} also knew that cars that undergo excessive turning forces must maximize tire grip especially on smooth roads and in order to do this they need large, strong sway bars and this is especially true of high power cars like the Mustang or Firebird and they set about designing anti-sway bars that would do just that. As a result of their efforts ST SUSPENSION (SUSPENSION TECHNIQUES} name became well-established in the aftermarket suspension marketplace and by motorsports enthusiasts. When KW AUTOMOTIVE GMBH purchased SUSPENSION TECHNIQUES it provided SUSPENSION TECHNIQUES with the opportunity of becoming part of a much larger picture with possibilities inherent in multi company situations; such as a sharing of ideas that lead to new innovation and more expansive marketplace. The anti-sway bars developed by ST SUSPESION (SUSPENSION TECHNIQUES) are the result of years of experience and that is evident when you consider the rewards they provide in improved handling, increased traction, improved balance with no loss in spring comfort. Not only that but they minimize the load differences between the curve outside and inside wheels, are made of primo quality spring steel and have bearings that are manufactured from superlative composite materials. The ST SUSPENSION (SUSPENSION TECHNIQUES) Sway-bar kit for your Pontiac Firebird, Formula, Trans Am 1993-2002 V8 / V6 or your Chevrolet Camaro 1993-2002is a perfect example of the quality of product with its 35mm front and 25mm rear bar complete with red poly-bushings and end links to make your Firebird handle better on those dangerous curves. Take a look at these on the LMPERFORMANCE web site and see if they will meet your Camaro, Firebird, Formula, or Trans Am needs and let us help you get the improved performance around those curves so that you are first at the finish line and let us help you get them at a competitive price and with free shipping.
Statement from KW Suspensions:
"KW Automotive's philosophy is to provide a clear and transparent pricing policy. We believe in being fair, honest, and open with our customers. This means that you are getting an incredible KW or ST product made just for you, and that you are paying a net cost for shipping. We often see "Free Shipping" listed, but shipping is never free and often includes additional costs and fees built in. We hope you appreciate our philosophy, and we thank you for your interest in the KW family of brands."
IMAGES: Images may be a representation and may not reflect the actual product.
KW automotive North America Inc. warranties its products to the original retail purchaser against defects in workmanship and material for the following terms from the date of purchase:
ST Suspensions:
- Springs, Shocks, Swaybars 2 years
- Bushings, Bump stops and Ball Joints 1 year
- Coilovers – 5 Years
This warranty is NOT TRANSFERRABLE, and is limited to the United States and its holdings, Canada and Mexico.
This warranty does not apply to:
- Any articles not purchased through authorized KW automotive North America Inc. dealers.
- Any articles that show signs of abuse, collision or improper installation.
- Any parts that are installed in vehicles that are used for race purposes, operated commercially, or used in off road conditions.
- Any parts that have been sold with "No Warranty" designation on the original invoice.
- Any parts that have been modified or altered in any way from its original configuration.
- Any parts that have been: Installed improperly.Used out of its published operating range or outside KW tested force ranges
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
