BMR Suspension BMR End Link Kit For Sway Bars, Front G8 ELK008

Reduce deflection and improve handling with adjustable sway bar end links for 2010-2011 Chevrolet Camaro and 2008-2009 Pontiac G8 from BMR Suspension. Manufactured from CNC-machined billet aluminum and heavy-duty steel hex bar stock, the BMR Adjustable End Links are designed to resist deflection, giving you the full potential of the sway bar. The links feature ball joint-style tie rods are manufactured by Proforged, which offers huge advantages over other companies’ end links that use rod ends. Ball joints allow for more articulation than a rod end, which is what you want when you hit the track. BMR’s ball joints are greasable, which you won’t find on our competitor’s end links. BMR designed the ELK kits for street performance, autocross, and road race applications. The adjustability gives you the ability to correct sway bar geometry and working angles on lowered Camaros/G8s and cars with adjustable sway bars. The adjustability also allows you to add preload and fine-tune the suspension for specific track conditions. Available in a durable black anodized finish for long-lasting good looks. Installation time is about 1 hour.

The amount of force exerted on the sway bar end link is staggering—especially if you’ve upgraded to an aftermarket sway bar, like BMR Suspension's SB012. The stock end links are weak and can bend or break. BMR’s ELK008 front End Link Kit allows you to push your 2008-2009 Pontiac G8 to the limit without fear of end link deflection. BMR manufactures the ELK008s out of CNC-machined billet aluminum. The right and left hand threaded ball joint-style tie rods are manufactured by Proforged and offer huge advantages over other companies’ end links that use rod ends. Ball joints allow for more articulation than a rod end, which is what you want when you hit the track. BMR’s ball joints are greasable, which you won’t find on our competitor’s end links. This ensures long life and flawless operation, and they make less noise than rod ends. The ball joints attach to the sway bar with 12mm studs, while the ball joints attach to the end link tubes with ½-inch studs. This combination of components gives you a huge increase in strength over stock end links.

BMR designed the ELK008 sway bar end link kit for street performance, autocross, and road race applications. BMR’s heavy-duty adjustable end links are designed to reduce deflection normally seen with stock sway bar end links. End link deflection means reduced sway bar rate, leaving you with increased body roll and reduced handling ability. BMR’s ELK008 will not deflect, giving you the full potential of the sway bar—no matter how hard you drive. The adjustable links allow for on-car adjustability, giving you the ability to easily correct sway bar geometry and working angles on lowered G8s, as well as cars with adjustable sway bars. The ELK008 adjustable end links give you the ability to preload the sway bar to fine-tune your suspension setup for any track. Combine this with BMR’s adjustable sway bars, and you can dial-in your car for the street or any track you may drive on.

• Fits 2008
• 2009 Pontiac G8
• On
• car adjustable
• Proforged ball joint
• style tie rods
• Greasable for long life and flawless operation
• 12mm/1/2
• inch studs for increased strength
• 6061
• T6 billet aluminum construction (front)
• Fully CNC
• machined
• Dramatically reduces sway bar end link deflection
• Designed to withstand high compression loads
• Allows for proper sway bar working angles and geometry on lowered S550s
• Allows for preloading of sway bars to fine
• tune suspension setup
• Designed for street performance, autocross, and road race applications
• Durable black finish
• 1 hour installation time
• Proudly designed in the U.S.A.
• Proudly made in the U.S.A.

Do you need performance suspension kits: A-Arms, control arms, brake kits, bushings and end links, drive shafts, suspension kits and a host of other aftermarket parts? LMPerformance has the best BMR Suspension Products for your aftermarket needs. BMR Suspension products are innovative in design, are of quality construction and are affordable.

BMR Suspension products are proudly Made In USA and BMR uses American-made DOM and chrome-moly steel. BMR performance suspension kits manufacture its parts in house and fixture-welds every part to assure excellent quality. We cut, bend, notch, drill, and mill our tubular components from American-made DOM and chrome-moly steel. Every product is fixture-welded to maintain consistent quality. We bead-blast our parts and then powdercoat them on our own powdercoating line. Then we assemble and package the products in our assembly department. By manufacturing our products in house, BMR can control the quality at every stage of the manufacturing process. BMR Suspension products and performance suspension kits fit and work so well because they are street driven and track tested on BMR project vehicles.

BMR performance suspension kits currently offers Suspension, Chassis, and Drivetrain products for over 16 different vehicles including but not limited to Chevy Camaro 1969-2016+, Pontiac G8 and Pontiac GTO, Chevy SS, Classic GM Muscle cars such as the Chevelle, GTO, A-Body, B-Body, G-body, and X-Body, Ford Mustangs 1979-2016+. They are the leading suspension manufacturer in many market segments.

Let LMPerformance help you find the BMR suspension parts you need. Whether you are in the market for swaybars, a-arms, lower control arms, shock braces, subframe connectors, drive shaft loops, pan hard bars, torque arms, crossmembers, and more you will find a great price at lmperformance.com.

You can trace the roots of BMR back to 1998 when they were far sighted enough to determine that suspension products that were innovative and affordable were lacking in the marketplace and they were clever enough to use this knowledge to develop the incomparable company they are today in their facility in Tampa, Florida. They leave no stone unturned in the development and production of their products to assure you are totally satisfied with what you purchase and they are able to do this because all of their suspension products go through rigorous testing by being street and track tested on BMR project vehicles. The multiplicity of project vehicles at their disposal contributes greatly to their success in this endeavor but even more impressive is the fact that nearly every BMR employee is a racer or hot rod aficionado with a love for racing and a desire to give you a quintessential product. Folks like this know just how critical the suspension products are on your car, whether it be for racing or street driving and they work diligently to give you the best in design and manufacturing and try to do this so that they can give you a part that is affordable, functional and long lasting. When you choose a suspension product from BMR you can feel confident in your decision because the product was created by people who know the product and know that it can function in a variety of situations because they have driven it where it counts-on the road.

IMAGES: Images may be a representation and may not reflect the actual product.