Product Description
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5481640. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency.This direct-fit catalytic converter is designed to fit the 2008 Ford E-250 and 2008 Ford E-150. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5481640. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction; easily install this spun body converter yourself using the proper tools; no cutting or welding required. MagnaFlow s state-of-the-art metrology department uses the latest 3D scanning systems during research and development; so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design; the single laser fusion weld greatly reduces the possibility of a leak; and our compact; low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2008 Ford E-250 and 2008 Ford E-150. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements; and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states; for the listed vehicles.
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 5481640. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow's state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2008 Ford E-250 and 2008 Ford E-150. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Exhaust,MagnaFlow,Catalytic Convertor,Cadillac Convertor,Convertor,Emissions
Exhaust;MagnaFlow;Catalytic Convertor;Cadillac Convertor;Convertor;Emissions
MagnaFlow Conv Direct Fit 2008+ Ford E-150 4.6L
California Direct-Fit Catalytic Converter
Direct-Fit Catalytic Converter
Catalytic Converter
CatConverter
California
LMPerformance has an extensive line of Magnaflow parts at a great price. Performance catalytic converters, exhaust systems, x- pipes and mufflers for your vehicle are manufactured in the USA with premium components. Their thirty years of experience results in a quality product backed up by a reliable company. The Magnaflow muffler has a perforated stainless steel core, mesh wrap and acoustical fiber. Best of all they come with a lifetime guarantee. Magnaflow exhaust kits are ideal for your diesel or gas performance vehicle. They are designed to give you years of trouble-free performance and a great sound. Let LMPerformance help you with your exhaust selection.
Car Sound Exhaust System, Inc., started in 1979 by Jerry PAOLONE and specializing in performance catalytic converter technology, forms the roots of the now MAGNAFLOW brand and MAGNAFLOW has been growing ever since its inception in 1981 so that they now are able to tout a thirty thousand foot research and development technical center with state of the art machinery like in-ground dynamometers, a flow bench and sound testing. The team at MAGNAFLOW wants to be able to give you a primo product that is manufactured here in the United States and is of exceptional quality and because they are confident in the quality of their products they give you a lifetime warranty. MAGNAFLOW has a twofold concern when it comes to their aftermarket performance parts and those are the same as you have –inimitable power gains and outstanding sound and they design their systems to give you both without sacrificing either one. Every part is strategically tested to make certain it results in the expected power gains and the MAGNAFLOW mufflers are fabricated with a free flowing design and a perforated stainless steel center, mesh wrap and acoustical fiber fill to assure y9u of a sui generis sound quality. MAGNAFLOW’s facility in Oceanside, California was created to be the most high tech in the country and they did that in order to be able to keep their commitment to give you products of unsurpassed quality and innovative excellence. In an even further effort to assure customer satisfaction MAGNAFLOW has taken upon itself the task of helping individual shops handle their ever evolving product line with information that assures they will install the MAGNAFLOW products for ultimate performance gains. MAGNAFLOW exhaust kits lead the way in the design and manufacturing of such systems in the country and their potpourri of products for nearly every make of car is a testament to their inventive genius and LMPERFORMANCE makes these available to you on our web site with exhaust systems for makes from Acura to Volvo and all of the brands in between and they are competitively priced and with free shipping to help you make your decision easier when it comes to an exhaust system for your car. With tighter restrictions on emissions and ever changing technology on cars the challenge to design and manufacture a aftermarket exhaust systems that can meet these demands yet still perform to the car owners expectations is a daunting one but MAGNAFLOW is just the company to meet this challenge with their facility in California, a state with already restrictive CARB rules, they have been dealing with these problems from the start.
IMAGES: Images may be a representation and may not reflect the actual product.
Magnaflow Warranty Policy
The manufacturer warrants that all MagnaFlow Performance Products are free from defects. Most of our exhaust products are warranted against blowouts and defects in material and workmanship for as long as the original purchaser owns the vehicle on which it was originally installed. The warranty is void if the exhaust products are not installed properly on the vehicle for which it is designed.
This warranty does not apply to any exhaust product which has been installed on any commercial or racing vehicle or which has been improperly installed, altered, or subjected to misuse or damage from accidents. Also, cost of labor and any additional parts required to complete installation of a replacement product are not covered by this warranty.
The warranty certificate, along with proof of purchase, MUST be presented to the service outlet from which you originally purchased the exhaust product, or any participating dealer, when making a claim for replacement. The original exhaust product must also be returned and exchanged for a new exhaust product of the same part number.
No other warranty, expressed or implied (including merchantability), applies to the exhaust product, nor is any person or the manufacturer authorized to assume any other warranty. The manufacturer does not assume any responsibility for any consequential damages occurred by the exhaust product, or inconvenience or interruption in any operation.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Stainless Steel Systems: Limited Lifetime Warranty against Manufacturing Defects
Black Finish Systems: 1 Year Warranty on Black Finish, Limited Lifetime Warranty against Manufacturing Defects
Titanium Finish Systems: 1 Year Warranty on Titanium Finish, Limited Lifetime Warranty against Manufacturing Defects
Carbon Fiber Systems: Limited Lifetime Warranty against Manufacturing Defects on Stainless Steel, No Warranty on Carbon Fiber
Aluminized Systems: 1 Year Limited Warranty
Stainless Steel Mufflers: Limited Lifetime Warranty against Manufacturing Defects
Policies
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Magnaflow 5481640 Catalytic Converter Direct Fit Review(s)
Other Popular Parts
Below are other popular parts other customers have purchased for their Ford E-Series.
Recently Viewed
Starting at 0% Order Now, Pay Later Learn More.
