The AEM 21-682C Performance Cold Air Intake System produces horsepower and torque gains by replacing your vehicle's restrictive factory air filter and air intake housing. This air intake system was designed, tuned and dyno-tested to fit specific Chevrolet Cobalt models. Air enters the system through an oversized AEM Dryflow synthetic washable air filter for outstanding air flow, filtration and performance. The air filter is relocated to the passenger-side wheel well which is designed to reduce intake air temperature and increase horsepower. The intake tubing is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system was developed to accommodate the engine's factory emissions control devices including the mass air flow sensor and PCV hose. The tapered cylinder shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). The air intake system is backed by AEM's Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the 21-682C vehicle applications to determine the legal status for each vehicle.
AEM's Performance Cold Air Intake Systems are designed, tuned and dyno-tested to give your engine more power and acceleration by replacing the restrictive factory air filter, air intake tubing and air box assembly.
Cold Air Induction System; Gunmetal Gray; Incl. Dryflow Air Filter/Alum. Tubing/Clamps;
Sistema de admisi?n directa de aire fr?o AEM
AEM 08 Chevy Cobalt SS Silver Cold Air Intake
Engine Cold Air Intake Performance Kit
Kit d'admission directe AEM Air Froid
AEM Cold Air Intake System
Air Intake System
AEM air intake system products and AEM induction systems can give your engine more power and as a bonus give you better gas mileage. After just an hour and a few basic hand tools you will have installed an AEM air intake kit and have done just that. AEM induction systems offer their BRUTE FORCE cold air intake kit for engines with larger displacements. These filters draw air from the best location and provide protection from the engine heat. LMPerformance carries the BRUTE FORCE for your Camaro and GTO and GMC SONOMA TRUCK. As an added bonus AEM's air systems include a lifetime DRYFLOW SYNTHETIC air filter that is reusable and does not need filter oil. Best of all AEM air intake systems & AEM induction systems are covered by a Lifetime Limited Warranty.
Shop the extensive inventory of AEM air intake system kits for better performance and better gas mileage at a great price at lmperformance.com.
The renowned AEM company, designer and manufacturer of cold air induction systems, was established in 1987 and since then has become prominent in the racing industry with cars tuned by them winning races and more specifically with cars tuned by them winning at the “Battle of the Imports” thus they were featured on the cover of Turbo Magazine and Sport Compact Magazine – you can’t get much better than that for a recommendation. They are responsible for the creation of the first packaged air induction system that was made available to the public in 1994 making it possible for the average individual to improve their car by increasing torque and horsepower and now their product line is in the hundreds. AEM induction systems does not just sit back on their laurels, they are constantly working to improve existing products and develop new products with innovations such as designing cold air induction systems with specific tube lengths and diameters and giving consideration to the improvement in efficiency created by cooler air in combustion. The list of their product innovations speaks to the company’s desire to make a product that is second to none and they work with companies like K&N to help develop improvements like conical air filters and the list of improvements goes on. A company that is always striving to find a better way, with things like dual chamber intake kits, hybrid induction systems and air bypass valves-the the kind of company you can trust when it comes to deciding on a Cold Air Induction system for your car. And the company does not just stop there, they employ stringent testing procedures and quality production techniques to assure you of a product you can trust and they back it up with a warranty that is good for the life of your vehicle unless it has been damaged due to mishandling. Products like the AEM Air Intake System & AEM Induction Systems, their biggest and toughest intake systems, are designed so that they will produce more torque and horsepower and provide exceptional filtration. Despite the fact that the Brute Force is not a true cold air induction system since it does not route the air filter outside of the engine compartment, it still does generate the air charge from the coolest source thus creating a cold air design. They were purposely designed this way because of the vehicle’s use in conditions that need protection from potential damage, such as off road, and keeping it under the hood system and when necessary, using a steel heat shield to shroud the air filter from engine heat accomplishes this goal. The Brute Force Air Intake features AEM’s DRYFLOW Air Filter, an oil free performance air filter, and since it is used on an air intake system it does not need to be cleaned for up to 100,000 miles depending on conditions. Check out our Cold Air Inductions here for more quality parts.
For all of the above reasons the team at LMPERFORMANCE offers you the AEM brand and invite you to peruse the parts that are available for your car, choose the one that is right for you and get it at a competitive price and with free shipping.
Shop our extensive line of Cold Air Induction Systems and Air Filters.
IMAGES: Images may be a representation and may not reflect the actual product.
AEM Lifetime Limited Warranty: This warranty lasts for the lifetime of the Product. Coverage applies only to the original purchaser of the Product and is non-transferable. This warranty covers defects in materials and workmanship of your AEM Air Intake System or AEM OE Replacement Filter (the “Product”), with the exceptions stated below. This warranty does not cover damage due to (a) transportation, (b) storage, (c) improper use, (d) failure to follow the Product instructions or to perform any preventive maintenance, (e) modifications, (f) unauthorized repair, (g) normal wear and tear, (h) any type of racing or competition, (i) any off-road use or (j) external causes such as accidents, abuse, or other actions or events beyond our reasonable control (e.g., acts of God and natural disasters).
AEM One-Year Limited Warranty: This warranty lasts for One-Year from the date of purchased product. Coverage applies only to the original purchaser of the Product and is non-transferable. The warranty period will not be extended if we repair or replace the Product. This warranty covers defects in materials and workmanship of your AEM Universal & Special Air Filter or AEM Accessory (the “Product”), with the exceptions stated below. This warranty does not cover damage due to (a) transportation, (b) storage, (c) improper use, (d) failure to follow the Product instructions or to perform any preventive maintenance, (e) modifications, (f) unauthorized repair, (g) normal wear and tear, (h) any type of racing or competition, (i) any off-road use or (j) external causes such as accidents, abuse, or other actions or events beyond our reasonable control (e.g., acts of God and natural disasters).
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
