Product Description
The Addictive Desert Designs Bomber Front Bumper is a slim fitting bumper for your 2020 and up Chevy 2500. A modern plate steel design gives a clean look, while the full 3/16 in. aluminum skid plate cuts down on weight. Reinforced mounts for 3/4 in. D-Rings bolt straight to your frame for unrivaled strength. This Chevy 2500 HD Front Bumper comes with four Rigid 360 6 in. light mounts, and two additional cube light mounts behind the side panels. As always, this bumper is fully bolt-on and made in America by ADD Offroad.
The Addictive Desert Designs Bomber Front Bumper for the 2020 and up Chevy 2500 is a slim fitting bumper. It?s made with plate steel and has full 3/16 aluminum skid plates, as well as reinforced mounts for 3/4 D-Rings.
The Addictive Desert Designs Bomber Front Bumper for the 2020 and up Chevy 2500 is a slim fitting bumper. It's made with plate steel and has full 3/16 aluminum skid plates, as well as reinforced mounts for 3/4 D-Rings.
Chevy 2500 2020-Up Bomber Front Bumper With 4 Rigid 360 6 Mounts In Center Dually Mounts In Side Pods With Parking Sensor Cutouts In Hammer Black with Satin Black Panels
Hammer black powder coat finish; Satin black powder coat panel finish; Mounts for 4 RIGID 360 6 round lights;
Bomber Front Bumper; Hammer Black; w/ Satin Black Panels; Mounts For 4 Rigid 360 6 in.;
ADD 20-23 Chevy 2500/3500 Bomber Front Bumper
2020-2022 Chevy Silverado 2500/3500
Addictive Desert Designs - Bumpers
Bomber Front Bumper
Bumper- Front
With a name like Addictive Desert Designs you have an inkling of the fact that the company owners love both the Desert and designing and you would be correct in your thinking. Well that is definitely true of the owners of Addictive Desert Designs since their passion is the designing of a product that is not only eye-catching but also rugged for those desert vehicles like trucks, SUVs and Jeeps. It all started in 2007 in Arizona and the company has successfully grown to be housed in an 80,000 square foot facility and that is no small accomplishment.
If you are in the market for an off road bumper then you have come to the right place because Addictive Desert Designs offers you an impressive selection of off-road bumpers for your truck or jeep. They are, in fact, at the forefront of the off-road aftermarket parts industry and the forerunners of the hand built custom front bumpers for the Ford Raptor. Their impressively designed Honey Badger front bumper is undoubtedly one tough bumper and is available for your Ford, Chevy, Toyota and Nissan Titan truck and is sure to meet your off-road needs.
In 2014 Addictive Desert Designs received the prestigious Best New Truck Accessory Award at the 2014 SEMA show for their ingenious locking storage design integrated into the company’s rear bumpers. The HoneyBadger rear bumper for Ford and Chevy are hard to beat tough bumpers and the HoneyBadger rear bumper for the Ford Raptor is one such example with ⅛” steel plating and 3/16” internal structure plating and designed to retain your factory dual exhaust and tow hooks. Or choose the Stealth rear bumper with its aggressive look and form fit for your Ford Raptor.
The RAM 2500/3500 unquestionably needs a heavy duty bumper for off-road use and the Bomber HD front bumper by Addictive Desert Designs is certainly that with its rugged plate steel design and a separate plate that mounts your winch directly to the frame. And for your Jeep Wrangler JL or Jeep Gladiator JT owners Addictive Design has an impressive stinger winch front bumper that is sure to impress.
The Stealth Front Bumpers for your Ford F-250/350, Chevy Silverado 2500/3500HD, Chevy 1500, Ram 2500/3500, Nissan Titan are undoubtedly tough front bumpers with .120” Wall Steel Tube Construction and the perfect addition to your vehicle for those tough off-road conditions. The Addictive Desert Design bumpers are built to last and come with an array of options so that you can customize your F150s, SVT Raptors, and Super Duty F250s and F350s with things like light bars and winches.
For you Jeep Wrangler JL and Jeep Gladiator JT owners Addictive Desert Designs has a multiplicity of bumpers for you including the ADD PRO Bolt-on Front Bumper for a race inspired look, the Stealth Fighter bumper for a new stylish look, or the Stinger front bumper for great offroad performance. The Stealth Fighter Full Length front bumper with extended side panels that seamless join your bumper and fenders.
* This is a universal item without fitment details. Please make sure this item is for your application. LMP does not guarantee fitment on universal items.
IMAGES: Images may be a representation and may not reflect the actual product.
Addictive Desert Designs Warranty Policy
Addictive Desert Designs warrants all parts of its manufacture, furnished under this agreement, to be free from defects in workmanship and material for a period of ONE YEAR from the date of purchase. This limited warranty covers the cost of the product. This limited warranty does not cover: installation, labor, freight, normal wear and tear, abuse, damage caused by mis-use, or damage caused by collision. This limited warranty is conditioned upon: Addictive Desert Designs being notified by Purchaser within one month after discovery of any defects, the return of the defective product(s) to Addictive Desert Designs at Purchaser's expense within the limited warranty period; and Addictive Desert Design's examination of such product(s) and its satisfaction that such defects were not caused by negligence, misuse, improper maintenance, accident, or unauthorized repair or alteration.
This limited warranty does not cover any consequential damages, including but not limited to the expense of being without the vehicle during inspection or repair/replacement period, delay, or mileage. Additionally, any and all implied warranties (including the warranty of fitness or merchantability) are limited for a period of one year from the date of purchase. This limited warranty is void if the product shows signs of alteration, modification, misuse, mishandling, improper care, and/or neglect. Also, this limited warranty is void in the event of improper installation. The liability of Addictive Desert Designs under this warranty is limited, and at Addictive Desert Design's option, solely to repair or replacement with equivalent products within a reasonable time.
Policies
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Addictive Desert Designs f270014110103 Bumpers - Steel Review(s)
Other Popular Parts
Recently Viewed