Rack and Pinion - Power - Tie Rods / Brackets / Power Steering Pump / Steering Shaft / Hardware Included - Aluminum - Black Powder Coat - GM B-Body 1958-64 - Kit
Rack and Pinion, Power, Tie Rods / Brackets / Power Steering Pump / Steering Shaft / Hardware Included, Aluminum, Black Powder Coat, GM B-Body 1958-64, Kit
This is a front steer center take off style rack & pinion that matches the stock front end and suspension. The rack is mounted to a one piece mounting bracket that bolts into the same factory holes for the steering box and idler arm. The kit does clear the Z Bar and 4 speed linkage, but does not work with the factory 348 & 409 Engines. If your vehicle had factory power steering, you will need to use our stabilizer bar mounts which are included in place of the factory mounts.
This kit works on most small block engine applications with short water pumps. Installs have been done successfully using Hooker Long Tube Headers. The kits are complete with a shaft kit which includes two u-joints and shafting as well as a pump kit with a pump matched to the gear, clip on reservoir, and Single V-Groove Pulley. Serpentine Pulleys are also available. Pump kits for Long Water Pumps are also available.
Attributes
- Application Specific Yes
- Manual / Power Power
- Power Assist Style Hydraulic
- Travel 7 in
- Input Shaft Spline Size 3/4 in
- Input Shaft Splines 36
- Turns to Lock 3
- Rack End Thread 14 mm x 1.5
- Brackets Included Yes
- Pressure Thread A Size 18 mm
- Pressure Thread A Style Male
- Pressure Thread B Size 6 AN
- Pressure Thread B Style Male
- Return Thread A Size 16 mm
- Return Thread A Style Male
- Return Thread B Size 8 AN
- Return Thread B Style Male
- Power Steering Pump Included Yes
- Power Steering Pump Style GM Type II
- Power Steering Pump Material Aluminum
- Power Steering Pump Color Natural
- Power Steering Pump Finish Natural
- Power Steering Pump Pulley Included Yes
- Steering Joints Included Yes
- Steering Joints Quantity 2
- Steering Shaft Included Yes
- Outer Tie Rod Ends Included Yes
- Boots Included Yes
- Boot Quantity 2
- Boot Color Black
- Material Aluminum
- Color Black
- Finish Powder Coat
- Quantity Kit
Tech Info:
- Pinion Type/Size: 3/4 - 36 Spline
- Amount of Travel: 7
- Turns Lock to Lock: 3 Turns
- Pressure Port Size: 18mm - 6 AN
- Return Port Size: 16mm - 8AN
- Pump Required: High Flow / Pressure
- Inner End Threads: M14 x 1.5
- Outer ends: 8020940
Kit Includes:
- Rack and Pinion
- Mounting Bracket
- Mounting Hardware
- Outer Tie Rod Ends
- Pump and Line Kit
- Steering Shaft Kit
Unisteer Performance Products is a custom street rod and muscle car steering specialist. They offer manual, hydraulic, and electric power steering racks and components to fit a variety of applications.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
Starting at 0% Order Now, Pay Later Learn More.
