Grimm OffRoad 10387
BRONCO TWIN AIR COMPRESSOR MOUNTING BRACKET KIT
Complete bracket kit for exterior mounting of ARB's Twin Compressor
Mounts one ARB Twin Compressor
Places compressor in engine bay
Comes with brackets, wiring, hose, air fittings, and hardware
Backed by a limited lifetime warranty
Made in the US
Grimm OffRoad?s compact mounting bracket kit solidly mounts ARB's Twin Air Compressor under the hood of your 2021+ Ford Bronco. This is the most functional and integrated kit on the market. The included wiring harness allows convenient access to the on/off switch and air chuck on the right front fender and by tucking the air compressor vertically inside the inner fender, it is kept away from the elements while keeping the noise where it belongs: outside.
- Complete bracket kit for exterior mounting of ARB's Twin Compressor
- Mounts one ARB Twin Compressor
- Places compressor in engine bay
- Comes with brackets, wiring, hose, air fittings, and hardware
- Backed by a limited lifetime warranty
- Made in the US
The Grimm OffRoad bracket kit includes four steel brackets, a new air line and fittings, and a wiring extender that connects to the compressor's standard harness. Each bracket is made out of steel with a black powder coat finish to protect against corrosion. The larger brackets mount the compressor itself inside your Bronco's inner fender, while the smaller brackets support and stabilize the compressor. The compressor is oriented with the two inlet air filters at the top of the engine compartment. The kit comes with a new braided stainless steel hose that runs to the included bulkhead fitting for attaching an air coupling like the one included in ARB's 171302 Pump Up Kit. Each kit comes with all the necessary fittings, hardware and instructions you need to get it installed on your Bronco.
- Easy to access air for airing up tires or setting up air lockers
- Much quieter than cabin-mounted air compressors
- Precision-cut, high-strength steel mounting brackets
- All hoses, fittings, and hardware required for installation are included
- Mounts ARB Twin Compressor above RH inner fender liner away from mud and water
- Locates compressor intake filters at the top of the engine compartment
- Simplifies the ARB wiring harness installation
- Limited Lifetime Warranty
- Made in the USA
We like making things better. Auto manufacturers do their best to make the best product they can, and modern vehicles are exceptional. However, we think they can be made better. Each manufacturer is working within constraints, be it fleet fuel mileage, cost, average expected use, design for a target demographic, tire size, etc. We want to eliminate those constraints and make the vehicle work better for you.
We believe that a handshake is a binding agreement, customer service and product quality are paramount, and if the product says, ‘Made in the USA’, that it means made in the USA. We do not want to deceive customers to make a buck, market our parts by saying the competitor's parts are no good or spend more on marketing than research and development. We are here to help you get the maximum enjoyment and utility out of your vehicle, for you.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
