Torque Converter - StreetFighter - 10 in Diameter - 3000-3400 RPM Stall - 200C / 200R4 / 700R4 - Each
StreetFighter Converter, GM,1984-97 700R4, 30-Spline, 1.703 Crank Pilot, 1993-97 4L60E & 1997-05 4L60E C5 Corvette, Non Lock-up
1984-97 700R4, 30-Spline, 1.703 Pilot (Will Not Fit LS1/LS2); 1993-97 4L60E & 1997-05 4L60E C5 Corvette StreetFighterTorque Converter With Anti-Ballooning Plate
Designed with the street/strip application in mind, this torque converter benefits more radically prepared street machines (those with performance cams, aftermarket carbs and higher compression ratios) to bring the launch RPM in line with the performance enhancements. The StreetFighterlets you take advantage of horsepower gains found in higher RPM ranges.
- Furnace-brazed fins, needle bearings, hardened pre-ground pump hub, computer balanced, installation hardware included
- Higher RPM launches, quicker reaction times, lower elapsed times, better low- and mid-range power, 1500+ RPM increase in stall over stock
- With heavy-duty front anti-ballooning plate for nitrous applications.
- Will not fit LS1/LS2
TCI began as a small shop in 1968 that was determined to do their best to provide high performance transmission parts to a select number of drag racing aficionados. Today TC Is one of the biggest manufacturers and one of the most technologically advanced manufacturers of high performance aftermarket drivetrain products worldwide and they have grown from a small shop to be housed in two locations and they aren’t stopping there because they continue to improve daily. Recognizing that there was a tremendous market in the ever expanding need and desire for high performance street products TCI saw an opportunity and took it and consequently their product line has evolved dramatically with a whopping eighty percent of their product line being developed for people like you who want a high performance vehicle for the road but they continue to stay true to their original goal by devoting twenty percent still to the hard core drag and track racers. Following a series of ownership changes in 1995 TCI was purchased by FEL-PRO and that led to even more change for TCI on the positive side with an impressive one hundred twenty thousand square foot facility and additional product lines and then again in 1998 FEDERAL MOGUL purchased TCI and then three years later COMP PERFORMANCE GROUP was the buyer. Being part of the COMP PERFORMANCE GROUP has served TCI well since it now is part of one of the largest engineering teams in the aftermarket industry. You can be sure that parts like the TCI Torque Converter 3000+ Stall Speed for your Pontiac Firebird, Formula, Trans Am 1994-2002, Pontiac GTO 2004-2006 and Chevrolet Camaro 1994-2002 are of primo quality because they have been designed and manufactured by one of the best in the industry but also because they have undergone the strictest of quality control procedures requiring triple testing of all parts. Don’t let yourself lose the race because you had a flex plate fail. Consider the flex plate from TCI that is strong, precisely machined and best of all is SFI 29.2 certified and made from plasma-cut, Blanchard-ground, billet steel plate. You will find TCI flexplates and torque converters at a competitive price on our website with free shipping.
* This is a universal item without fitment details. Please make sure this item is for your application. LMP does not guarantee fitment on universal items.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
