E3 Spark Plugs E3.109 Premium Racing Spark Plug
Spark Plug - Racing - 14 mm Thread - 0.708 in Reach - Gasket Seat - Non-Resistor - Each
Spark Plug
Premium Racing Spark Plug; Non-Resistor; 5/8 in. Hex Size; 0.708 in. Thread Reach; 14mm Thread Diameter; Taper Seat; DiamondFIRE Tip w/Fixed Gap;
FEATURES:
- Patented DiamondFIRE Ground Electrode
- Edge-To-Edge Ground Electrode Out Performs Other Plug Designs
- E3 Equipped Engines Can Minimize Venting Of Unburned Fuel
- Burn Fuel More Efficiently By Burning Fuel More Completely
- Provide A Like-New Performance For The Life Of The Plug
- The Most Environmentally-Friendly Plug Available
E3.109 is a 14mm, 0.708 in. reach plug with a 5/8 in. hex and a taper seat. It is built to have a cold heat range, non-resistor, and is used a variety of racing applications. E3 racing plugs are fitted with its patented DiamondFIRE ground electrode, which is secured with two legs to the shell. This allows for excellent heat transfer and provides additional stability to the side wire in these high RPM engines. The unique DiamondFIRE ground electrode is proven to increase power, reduce fuel consumption, and improve hydrocarbon emissions in long-term use. The E3 ground electrode and full-size center electrode also provides optimal performance over an extended product life.
Our company was formed to find a better design that would provide E3 customers with performance advantages such as increased power, improved fuel efficiency, and a reduction in hazardous engine emissions that can contribute to global warming. With decades of experience in spark plug engineering and the automotive aftermarket, the principals of E3 Spark Plugs realized that the key to producing a better spark plug did not lie in the use of fancy metals, such as iridium or platinum. Instead, it would require an entirely new approach in the design of the plugs electrode to improve the ignition of raw fuel inside the engines combustion area. The first step would be to get rid of the antiquated J-wire electrode. This would allow the flame kernel to move directly toward the unburned air/fuel mixture. E3s initial research started in its own laboratories and led to the testing of new designs at two leading engineering universities. After investing in years of research and assisted by top professors in the field of combustion and engine dynamics, the DiamondFire ground electrode was developed as a better way to ignite the fuel-air mixture inside the engines cylinder. Since this advanced design increased the combustion pressure inside the engine before raw fuel was exhausted, they had discovered a better way to control the burn. A faster flame speed and improvements in directing the spark inside the combustion area resulted in a marked (and proven) increase in power output, fuel efficiency, and reduced emissions for gasoline-powered engines. These results were validated using the some of the most sophisticated testing equipment available. Over and over again, the new plug burned fuel more efficiently, improved power response, and cut toxic emissions. Today, E3 remains dedicated to reducing greenhouse gas emissions by limiting the amount of unburned fuel.
Featuring what E3 calls Diamondfire technology, E3 spark plugs provide a better spark, which burns fuel more thoroughly and effectively. Used in a variety of performance applications, and available in most standard sizes, E3 spark plugs will help your engine achieve power and efficiency gains.
* This is a universal item without fitment details. Please make sure this item is for your application. LMP does not guarantee fitment on universal items.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
