Ignition Controller - SmartSpark - Step Retard - Plug N Play - 24/58 Tooth Reluctor - GM LS-Series - Each
Smart Spark LS includes support for LS 1 version and for carbureted GM LS series V8 engines with 24 or 58 tooth crank trigger. The SmartSparkLS is a versatile ignition module for GM LS1/LS6 and LS2/LS7 race engines and features selection for GM LS1 or higher energy LS2 style coils.
Preprogrammed with advance tables suitable for a wide range of normally aspirated high performance engines.
Digitally set launch, burnout, and maximum RPM limits with 100 RPM steps from 3,000 to 9,900 RPM. Access to launch and burnout RPM limits requires optional USB interface and PC Link software. (Included in complete kit)
USB interface and PC Link software allows programming a custom advance table based on RPM and manifold pressure.
New Smart Spark Log software displays real time engine data during initial setup and dyno tuning. Allows individual cylinder timing (ICT) capability with RPM based offset up to 5 with 0.1 steps.
Three general purpose input terminals. Inputs can be used for RPM limits and multiple retard functions including driver adjustable retard (requires optional Daytona SensorsRTD-1). Mode switch allows selection of basic functions. Advanced features require optional USB interface and PC Link software.
Status LEDs show trigger inputs. Fully encapsulated construction without any internal voids. Heavy duty 12 pin Deutsch connectors used for signal connections.
Same mounting pattern as competitive units offered in the performance and racing aftermarket. and has a very Compact Size: 6.0L x 3.5W x 0.63H.
New installations require Daytona Sensors Part Numbers 119002, 119003, 119005, or 119006 wiring harness depending on mounting location. If replacing MSD part #6010-#6012 installations, Daytona Sensors adapter harness Part # 119004 is required.​
The Smart Spark LS Ignition Module System Kit includes the PC Link software and also a USB cable. PC Link software runs under Microsoft Windows XP/Vista/7/8 and Windows10. Older Windows versions and Mac are not supported. PC Link allows the user to program all the parameters and tables within the Smart Spark system. Minimum PC requirement is a 300 MHz Pentium with super VGA display (SVGA with 1024 x 768 pixel resolution). The Smart Spark connects to the PC by means of the USB interface supplied with the system. The PC must have a free USB port.
Daytona Sensors develops and sells electronic controls and sensors designed for use on high-performance and race vehicles.
* This is a universal item without fitment details. Please make sure this item is for your application. LMP does not guarantee fitment on universal items.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
Starting at 0% Order Now, Pay Later Learn More.
