Synergy 2018+ Jeep Wrangler JL/JLU Adjustable Front Lower Control Arms - Pair
Synergy Jeep JL Adjustable Front Lower Control Arms are a Heavy Duty upgrade for the stock fixed length JL control arms. They are adjustable to allow for caster correction and re-centering of the front axle housing for oversize tires and increased ride heights.
Our Double Adjuster Assembly allows adjustment of control arm length without removing them from the vehicle and uses a pinch bolt instead of jam nut for ease of use and reliability. Maintenance Free Dual Durometer Bushings are used at both ends for uncompromised articulation and isolation of Noise, Vibration, and Harshness (NVH).
Fitment:
- 18+ Jeep Wrangler JLU
- 18+ Jeep Wrangler JL
- 2020-present Gladiator
Benefits:
- Stronger than stock
- Lighter than comparable offerings
- Increases articulation
- Maintenance Free, no greasing required
- Isolates Noise, Vibration, and Harshness (NVH) increasing ride quality
- Adjustable to accommodate oversize tires and increased ride heights
- Adjustable without removing from vehicle
- No jam nuts that are impossible to keep tight
- No modifications required to install
- Limited Lifetime Warranty
Features:
- Made from high quality crush resistant 1 3/4 inch X .188 Wall 1026 DOM tubing
- Tubing size allows the best combination of strength and weight savings
- Control arms are designed and manufactured to maximize wheel and ground clearance
- Control arm bushing housing is offset to the control arm tube on the axle side so no modifications need to be made to the control arm brackets to install
- Control arms provide more clearance for larger tires
- Features Synergy Dual Durometer Bushings (DDB) with Teflon bearing surface for a maintenance free design focusing on performance, flex, longevity, and ride quality
- Synergy double adjuster sleeve and pinch bolt assembly allows for adjustment of control arm length without removing control arm mounting bolt
- Adjustable from stock length to 1.5 inches longer than stock
- Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
- 100 percent bolt on components assures an easy, trouble free installation with the use of basic hand tools
- Sold in pairs
Min/Max Lengths:
- Min length: 24.00 inches
- Max length: 25.50 inches
Now that you are an owner of an off-road vehicle you are probably looking for ways to improve your vehicle's performance particularly when it comes to your suspension system. Well, Synergy Manufacturing has been in the market of doing just that since 2005. And you can be assured that most of their components are made right here in the USA and that the suspension components are designed from scratch to give you world class performance.
Synergy thought of everything for your suspension system with features like progressive coil springs, adjustable track bars, shock relocations kits, adjustable upper and lower control arms and dual durometer bushings to name a few.
But Synergy Manufacturing didn’t stop with suspension systems but went on to design heavy duty steering components with features like a drag link that bolts directly into your factory mounts, tie rods that are over forty percent stronger than your stock rods and more. The axle upgrades, skid plates and other exceptional components can serve to provide your off-road vehicle with that much desired off-road performance and give it a great look as well.
The adjustable ball joint kit is designed with longevity in mind and is meant to last the life of your vehicle and to stop that sloppy steering, and it comes with a limited lifetime warranty. And you can be assured that rigorous testing is done on all components because they are tested on trails like the extreme Hammers and Rubicon trails that challenge even the toughest coil springs, shock mounts and control arms to the test.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
Starting at 0% Order Now, Pay Later Learn More.
