Oracle Lighting Oracle Mini Cooper 09-13 Halo Kit - ColorSHIFT w/ Simple Controller 2369-504

The ColorSHIFT Halo Kit can produce any color including whites from 3000K-15000K with the push of a button. This allows the user to dial-in the exact color rings that they desire. These 3-Chip 5050 SMD rings are BRIGHT, and for some they may be too bright, that is why (for the first time) the user has full control over the ring brightness. ORACLE SMD or Surface Mount Diode Halos utilize an advanced type of LED chip that can produce brilliant light output while only consuming a small amount of power. The SMD chips are installed onto a CAD designed 6-layer PCB (Printed Circuit Board) which is very sturdy and will not break if pressured. The PCB can easily be mounted to a headlight housing using the pre-installed 3M adhesive tape backing.

The kit includes a ColorSHIFT - Simple controller. The halo kit uses an advanced LED chip which provides bright light output yet consumes less power. The kit mounts easily to your headlight housing with the provided 3M adhesive backing.

Oracle Mini Cooper 09-13 Halo Kit - ColorSHIFT w/ Simple Controller

ColorSHIFT Halo Kit, ColorSHIFT - Simple

Headlight Halo Ring Emitter Set

Oracle - Halo Kit - 2369-504

2009 thru 2013 Mini Cooper

Halo Kit

HERE AT ORACLE LIGHTING TECHNOLOGIES WE OFFER QUALITY PRODUCTS, BACKED BY A STRONG WARRANTY PROGRAM.

Our name has become the standard in solid-state automotive LED technology, and now we continue to push the envelope even further by evolving our line into the home and industrial lighting markets.

Technology is always evolving and we evolve with it.

By teaming up with ORACLE Lighting you are giving us the chance to exceed your expectations in quality, passion, and service.

TESTING AND INDUSTRY STANDARDS:

Technically LEDs cannot be manufactured with completely consistent optical properties as a result of the production processes involved. Brightness and color can vary substantially from component to component even in the same production batch. This is why we test ORACLE Lighting products in the production process and in their final application. Comprehensive optical characterization is also essential during research and development of LEDs and for LED-based products.

We use in-house measurement systems generate very accurate results with reliable reproducibility in conformity. Equipment used includes spectroradiometers which utilize a special chamber to isolate the tested product from any sort of light pollution from outside sources

HIGH PERFORMANCE LIGHT SOLUTIONS:

Our products are designed to take anything that you can throw at them as well as the torture tests we subject them to during our QC testing. This was further demonstrated at this year's Rolex 24 Hours at Daytona Grand Am Race. You may never be in the situation where you drive your car for 24 hours straight endurance race at an average speed of 100+ mph but its good to know that these lights have been subjected to these sorts of conditions and performed extremely well.

QUALITY CONTROL COMMITMENT:

ORACLE Industrial Lighting products are designed harsh environments found in today's modern facilities. ORACLE Solid-State LED Lights are engineered using the highest quality USA-Made components from Cree and Bridgelux and are manufactured to world-class quality standards. ORACLE residential, commercial, and industrial lighting offers end users reliability, exceptional quality and value.

The average lifetime rating of 50,000 hours continuous use will not only save users the cost of replacement bulbs and ballasts but also the high maintenance cost of physically changing out florescent tubes multiple times annually.

ORACLE Industrial LED Lights have more even light distribution than the incandescent lamp counterparts as indicated by the ratio between the minimum and average Lux produced in the target zone.

WHY LED LIGHTING IS HERE TO STAY:

LEDs are cool to touch, LED Bulbs are unbreakable, and LED Lighting saves time, money and the environment. Using a 3 Watt LED Light versus a 60 light bulb will save you $405.01 Per LED Bulb at 11¢ per kWh/60000hrs. If every U.S. household replaced just one standard 60 watt bulb with a LED Light bulb it could save 24,184.4 mega (million) watts per day. In an average household 15% of the electricity goes to light and the average home contains 20-30 bulbs. Incandescent bulbs have no energy efficiency, only 5 to 10% of the energy is converted into visible light and the rest is lost to heat. Solid state devices such as LEDs are subject to very limited wear and tear if operated at low currents and at low temperatures. Many of the LEDs made in the 1970s and 1980s are still in service today.

IMAGES: Images may be a representation and may not reflect the actual product.