BD Diesel Transmission Kit - 2005-2007 Dodge 48RE 4WD TVV w/ Tap Shifter & Billet Input 1064234BFT

BD Dodge Transmission Stage 5 Kit c/w Tap Shifter & Billet Input - 2005-2007 48RE 4wd w/TVV Stepper Motor

This transmission comes BD Tapshift ready which includes a new gear lever, gear selection display, and control module with fingertip shifting. The 48RE Tapshifter unlocks full electronic gear selection, torque converter lock-up control, gear limiting function and a full manual gear mode. The stock transmission is designed to handle the output of the stock engine, but not much more. Increase the durability of your drivetrain with a BD transmission. All transmissions come with BD''s heavy duty transmission pan and most packages come bundled with our auxiliary transmission filter kit for added protection! Comes with Billet Input Shaft designed to withstand rapid acceleration and high torque.

DETAILS:

• Automatic Transmission Assembly
• BD Dodge Trans Stage 5 Kit c/w Tap Shifter & Billet Input 2005-07 48RE 4wd w/TVV
• BD auxiliary full flow filter kit for extra protection
• BD rigid aluminum heavy duty transmission pan
• Billet Big fine spline input shaft
• Billet band lever
• Billet band strut
• Clutch Count: DIRECT 6
• Clutch Count: FORWARD 5
• Clutch Count: OD 6
• Clutch Count: OD DIRECT 10
• Cooler line case saver in every transmission
• Drilled intermediate shaft for increased lubrication
• Every transmission is tested on a dyno
• High temp/energy Raybestos band
• Includes new model shift lever, BD control module, BD gear selection display and wiring harness
• Increase the durability of your drivetrain
• Increased line pressure to 190-200psi
• Magnetic drain plug
• Modified manual valve for lube in all positions
• No shuttle shifting problems
• Not warranted for Race or Sled Pull use
• Pan adds 2qt extra oil capacity
• Pan heat-dissipating fins keep temperature down
• Provides manual torque converter lock-up clutch control
• Sealed plug-in wiring, no cutting or tapping of wires required
• Stock thrust bushings replaced with roller Torrington bearings
• Upgraded governor pressure transducer (47RE/48RE) - Twice the burst pressure than stock
• Upgraded governor solenoid
• Upgraded Valvebody
• Works with stock shifting and has gear limiting function
• TRANSMISSION DODGE 2005-2007 48RE 4WD
• TRANS W/TAP STAGE 5

Part Number 1064234BFT SPECS:

• Category: Automatic Transmissions
• Engine: 5.9L Cummins 04.5-07
• Make: Dodge
• Prop 65 (C, R or CR): CR
• Prop 65 - Short Label: bddiesel_prop65_warning.png
• Prop 65 Warning: WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov
• Prop 65 Yes/No: Yes
• Suggested Product: 1071217X
• Title: BD Dodge Trans Stage 5 Kit c/w Tap Shifter & Billet Input 2005-07 48RE 4wd w/TVV

The stock transmission and torque converter were designed to handle the output of the stock engine, but not much more. Increase the durability of your drivetrain with a BD transmission and torque converter. BD's transmissions incorporate revised oil circuits, extra clutches and stronger internals to handle more power and torque than the stock transmission. All transmissions come with BD's heavy duty transmission pan. By design, OEM transmission Helical gears and engine torque thrusting causes stock plastic and Babbitt thrust washers to melt and break down contaminating lubrication oil and damaging solenoids. We remove the thrust washers and install roller bearings throughout the transmission which eliminates oil contamination, maintains tolerances, reduces heat and prevents premature solenoid failure. Total package includes auxiliary Full Flow Transmission Filter kit for added protection and cooling, BD Tapshifter lever, gear selection display, and, control module with fingertip shifting, full electronic gear selection, torque converter lock-up control, gear limiting function and a full manual gear mode. Comes with Billet Input Shaft to take the snap from rapid throttle and high horsepower. The Perfect combination for those installing the Triple Torque Force Converter.

All new bushings; New design valve body; Stock thrust washers replaced with roller Torrington bearings saves governor solenoids and reduces friction; Drilled intermediate shaft for increased lube; Modified manual valve for lube in all positions; 47RE transmissions upgraded with more rugged 48RE components; New input shafts and hub; Pressure increase starts at much lower engine rpm's and at lighter throttle pedal position movement; Light throttle shift firmness is also maintained; No shuttle shifting problems; Upgraded governor pressure transducer (47RE/48RE); Cooler line case saver in every transmission; Added heavy-duty clutches with up to 25% more material than stock; Machined forward (rear) beveled pressure plate; Machined forward (rear) beveled pressure plate; Machined overdrive brake (front & rear) pressure plate; Machined direct clutch (front) piston; High temp/energy Raybestos band; Billet band strut & anchor; Billet dual ring accumulator piston; BD auxiliary full flow filter kit for extra protection; Clutch Count: FORWARD 5; Fully rollerized geartrain; Clutch Count: DIRECT 6; Increase the durability of your drivetrain; Revised oil circuits; Handles up to 300% more power and torque than the stock transmission.

BD Dodge Transmission Kit c/w Tap Shifter & Billet Input - 2005-2007 48RE 4wd w/TVV Stepper Motor

BD Diesel Transmission Kit - 2005-2007 Dodge 48RE 4WD TVV w/ Tap Shifter & Billet Input

BD Dodge Transmission Kit c/w Tap Shifter & Billet Input 2005-07 48RE 4wd w/TVV

BD Dodge Transmission Kit c/w Tap Shifter/Billet Input 2005-07 48RE 4wd w/TVV

TRANSMISSION DODGE 2005-2007 48RE 4WD

Automatic Transmission Assembly

BD TRANSMISSION

As we all know, family owned businesses do not always succeed but that is not the case with BD Diesel Performance. Since its inception in 1972 as Valley Fuel Injection Ltd as well as when it became recognized under the name BD in 1989 it has been a family owned and operated company that is proud of its product and its success and the introduction of the first brake for Diesel pick-up trucks in 1989 established BD Diesel as a recognized and reputable name in the industry. The 65,000 square foot facility and a complement of over 130 employees affords BD Diesel Performance the opportunity of designing and producing impressive products for both diesel and gas applications.

The extensive array of products available from BD include things like the BD turbocharger that is hand crafted to meet even the most demanding customers needs. The use of precision lathes, milling equipment, honing machines and inspection CMMs guarantee that your product will surpass OEMs specifications. Of course, the BD exhaust brakes are a force to be reckoned with since their resilient cast-iron bodies have an offset stainless steel butterfly that builds peak at an extensive pace. The Positive Air Shutdown assures you that emergency engine shutdown is forthcoming and the turbine diverter valve will improve your turbocharger response time if you have a turbo without Variable Geometry regulation.

BD has a dedicated and experienced team in their Transmission and Torque Convertor Department whose goals are to meet the challenge of transferring all the torque from your diesel engine to your drive wheels while at the same time not compromising shift quality and causing as little noise, vibration and harshness as possible. And since BD is cognizant of the need to keep pace with the times they have a dedicated and impressive electronic department to meet your needs in that area.

IMAGES: Images may be a representation and may not reflect the actual product.