Snow Performance has combined performance, quality, and easy installation in this new water-methanol injection system engineered specifically for all forced induction (supercharged/turbocharged) applications. Increase your pump gas octane by 25 points and make more power efficiently with a cooler running motor! Complete with custom water-methanol injection throttle body spacer plate, braided stainless line, and 4AN fittings offering un surpassed reliability and ease of install. The Stage 2 uses a progressive VC-50 controller (ISO 9001 Manufactured) that proportionally injects more or less according to boost pressure. Start and full points are adjustable for engagement and delivery curve to match what the engine requires. Proportionally injecting according to boost pressure gives an accurate delivery of water-methanol and allows cooling and performance improvements over a wide range for improved drivability. The VC-50 controller (52mm gauge) offers the functionality of a boost gauge and water-methanol controller all in one! Highlighting a 7 color (Blue, White, Red, Yellow, Orange, Purple, Green) OLED screen displaying boost, percentage of injection, low level, secondary nozzle activation, prime button, and 2 fault codes directly on the screen you can tailor the controller to match your OEM gauges or mix and match up to two colors. Fits all forced induction (supercharged/turbocharged) Dodge Challenger/Chargers with 5.7 / 6.1 / 6.4 engine.
Snow Performance Stage 2 Boost Cooler 2015+ Subaru WRX (Non-STI) Water Injection System
Stage 2 Boost Cooler 2015+ Subaru WRX Water-Methanol Injection System
Nitrous Oxide Injection System Kit
Snow Stage 2 Boost Cooler
Stage 2 Boost Cooler
Being in business for almost twenty years is no small accomplishment and that is just what Snow Performance has accomplished since they had their start in 2002 when they began designing and manufacturing primo quality Water Methanol injection systems and then their combining with Nitrous Express.in 2018 only added to their success.
The ability of Snow Performance to offer you Diesel, Gasoline and High Pressure systems is a further testament to their ingenuity and drive and has certainly contributed to their success in the marketplace. Let us preface the introduction of the products from Snow Performance by telling you what a Water/Methanol injection system does for your car. Simply put it reduces air inlet temperatures by the initiation of an atomized mixture of water and methanol fuel in the car intake thus increasing octane.
Fortunately for concerned car owners Snow Performance offers Water/Methanol injection systems in several stages. For gasoline engines the Water/Methanol injections systems comes in stages 1, 2, 2.5, 3 and 4 so you get to choose the one that is right for you Those of you who own cars like the inimitable V8 Muscle cars or if you are headed to the track, have a high HP car or positive displacement supercharger then the Stage 1 system might be just the ticket.
The most popular system is the Snow Performance Stage 2 kit that fits the bill for those forced induction cars and the 2.5 system utilizes a progressive controller that allows you to proportionally inject the amount according to manifold pressure thus allowing the start and full points adjustability to match what your engine needs. And if you don’t want to mess with your fancy interior the Stage 3 might be the one for you since no additional gauge pods are needed because the display can be mounted on the steering column or on your car’s dash. And maybe the Stage 4 is for you since it uses OEM fuel management control and is the most advanced water/methanol control available.
Snow Performance did not neglect you diesel owners because their Water/Methanol injection systems came in Stages 1, 2, 2.5 and 3 so lots of choices here. On a budget, then the Stage 1 might be just what you are looking for since it is the most cost effective kit available today. And if you have a forced induction system, maybe a supercharged or turbocharged system, then consider the Stage 2 system with its handheld display screen.
If you own a 5.9 Cummins no problem here since the Stage 2.5 was designed with you in mind and if you need to tow those heavy loads then try the Stage 3 system by Snow Performance. And if you need a high boost application then the Pumpless water/methanol system might be for you.
And, of course, Snow Performance can meet your needs when it comes to those Water/Methanol accessories you have been searching for since it can provide everything from rings to tanks and everything in between.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.