Forged 4340 Steel H-Beam Rods - SUBARU FA20/TOYOTA 4UGSE.
Forged 4340 steel H-Beam connecting rods are forged from a two-piece forging and feature a fully machined and shot-peened surface. Sizing is held to exact tolerances. Sold as a weight-matched set. Equipped with ARP 2000 bolts for even more power-handling capability. Recommended for competition use.
DETAILS:
- Torque to 43 ft-lbs, ARP moly lube ONLY.
- Engine Connecting Rod
- H-BEAM Rod FRS/BRZ
- ESP H-Beam Rod
- H-Beam Rod
Part Number CRS5089S3D SPECS:
- Big End Width: 0.842
- Bolts: 3/8 ARP 2000
- Bushed for full-floating piston pin: Yes
- Center to Center Length: 5.089
- Housing Bore: 2.165
- Length Center Bore To Center Bore: 129.3
- Material: Forged 4340 Steel
- Pin End Width: 0.842
- Pin Size: 0.906
- Prop 65 (C, R or CR): C
- Prop 65 - Short Label: prop65_warning.jpg
- Prop 65 Long: This product contains nickel, which is known to the State of California to cause cancer.
- Prop 65 Yes/No: Yes
- Rod Journal: 2.047
- Title: ESP H-BEAM ROD FRS/BRZ
Preparation is quite often the key to success and the team at Eagle Specialty were cognizant of this and for that reason spent ten years not only developing extensive technology and excellent designs but also forming relationships that would benefit them in the desire to create first class products and an award winning company. Eagle Specialty began small in 1992 with just a few part numbers but their desire for excellence and customer satisfaction led to the formation of a rapidly growing enterprise. Crankshafts were next on the horizon for Eagle and the potpourri of connecting rods grew also.
Now, the future of the company has been guaranteed and because of the search for improved designs and utilizing improved materials and manufacturing techniques Eagle Specialty has become the largest and most appreciated aftermarket connecting rod and crank manufacturer in the aftermarket industry. The hallmark of Eagle’s success is their drive to make the Eagle products lighter, stronger and more easily manufactured while at the same time considering diversity of product.
Excessive cost is not always an assurance of quality and Eagle’s ability to keep their production costs down through efficient manufacturing allows them to provide a product that is suited to a genre of applications at a reasonable price to their customers without the necessity for compromising on manufacturing procedures, material or quality control.
Just consider the Eagle H-beam rods and the fact that they are expertly forged from certified 4340 chromoly steel and while there are a number of companies who also use 4340 chromoly steel it is not necessarily all of the same quality steel with some having only 1.65% nickel content. Eagle relies on large scale material testing to achieve its goal of a much tighter tolerance of all alloying elements. Couple that with a primo heat treatment and tempering process and you have a 4340 steel that can test ten to fifteen percent stronger than average.
The manufacturing of the Eagle H-beam rods are from 2 piece forging that serves to strengthen the rod cap by acclimatizing the “grain” of the metal with the stress direction and Eagle does not use the imperfect “cracked cap” manufacturing so you are assured of a consummate fit since they simply machine the rod and cap perfectly. And we all know how precise a computer can be so Eagle uses the highly developed Sunnen Kross grinding system to give your product a perfect bore size.
And if you are in the market for a crankshaft the team at LMPerformance knows you want the smoothest, flattest surface possible so that the crankshaft and cams on your car are properly lubricated thus minimizing heat and fatigue. Eagle has thought of this and their crankshafts are polished on impressive Q-PAC micropolishing equipment and the piece de resistance, the impressive ESP Armor surface finishing process, gives your crankshaft a mirror like finish that allows oil to slip freely from the surface. And as an added bonus other fluids including water will flow more easily from the crankshaft and the result will be more corrosion resistance.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
