Monster-Ram improves airflow from the intercooler. Flows 1008 cfm (77.01 lbs/min) compared to Stock's measly 432 cfm (33.00 lbs/min). Raises boost without increasing backpressure at the turbine. Result: a more responsive, power efficient engine. Up to four 1/8 inch NPT ports for flexibility! The top two NPT ports are positioned to allow for proper atomization directly into the center of the air mass while preventing wall wetting. Accommodates stock mounting points including Temperature and Pressure sensors, wire harness and dipstick tube. At Banks Power, just enough is never enough when it comes to engine airflow. Maximum power, performance and efficiency are the ultimate goals, but to make it all happen the engine has to breathe freely and without needless restrictions. Finding ways to pump your engine full of cooler, denser air has always been the key. Our High-Ram intakes have always whipped the competition. Our new Monster-Ram flat-out destroys it. Utilizing the latest in electronic computational fluid-dynamic technology, tested on the flow bench as well as on the dyno, and finally proven in the real world where the rubber meets the road, Monster-Ram is a beast that only Banks could have unleashed. A simple, direct-replacement casting, Monster-Ram is instant power, performance and acceleration gratification. The factory inlet is cramped and angular compared to Banks' larger, streamlined cast-metal Monster-Ram. It's the perfect upgrade whether you're just starting out or working to build a serious, purpose-built race machine. And with up to four ports for water/meth/propane/nitrous injection (or pressure/temp. sensors), the sky's the limit for performance expandability. Monster-Ram is CNC ported as well as the optional Banks Billet Intake Grid Heater Delete spacer.; Note: This product is for Race Use Only. Emissions equipment must be removed and requires a special ECU program available from others.
Outflows stock by up to 230%;4 inch CNC machined inlet;Four 1/8 inch NPT ports (Top ports aimed for optimal atomization of Straight-Shot water-methanol);Accommodates stock mounting points;Optimizes air pressure and distribution going into the intake manifold;Competitively priced;Includes Fuel Line, 4 to 3.5 inch Hump Hose and all necessary hardware;Not Emissions Compliant
Up to six ports for flexibility! Monster-Ram improves airflow from the intercooler. Raises boost without increasing backpressure at turbine. Larger and less restrictive than the puny stock air intake; Monster-Ram allows a greater flow of oxygen-rich air into the cylinders for instant torque and responsiveness plus greater fuel economy.
FITMENT NOTE: Will not work with stock boost tube;Part of the Banks Racing line;Does not accommodate emissions equipment;Pure race capability, requires special ECU program available from others
Banks Power 07.5-17 Ram 2500/3500 6.7L Diesel Monster-Ram Intake System w/ Fuel Line 4in Natural
Monster-Ram Intake Elbow Kit with Fuel Line and Hump Hose, 4 inch Natural
Monster-Ram Intake Elbow Kit with Fuel Line and Hump Hose; 4 inch Natural
Monster-Ram (Natural) $395;Fuel Line $60
2007.5-2017 Dodge/Ram 2500/3500 6.7L
Engine Air Intake Deceleration Elbow
Monster« Ram Air Intake Elbow
If the president of a company started preparing for his future at the age of 14 I am sure you would be impressed and that is just what happened when the Banks Power president tore down his mother's car to increase its horsepower at just that age but then remarkably two years later the impressive Gale Banks was in the engine business. And he stays involved even today as president of an engineering and manufacturing complex that consists of 12 acres in the San Gabriel Valley town of AZ usa.
Banks Power today is one of the foremost designers and manufacturers of power-enhancing products for everything from trucks to motorhomes and sport utility vehicles and having as a testament to their ingenuity is the fact that Banks Power is the one and only company to have record setting achievements at Bonneville in not only the automobile class but also the truck class. Still not impressed, well what if we told you Banks Power also has achieved titles like “World’s Fastest Passenger Car”, “World’s Fastest Pickup”, “ World’s Fastest Motorhome” and “World’s Fastest Diesel Drag Racing Truck”. And Banks Power has a miscellany of technological achievements to their credit consisting of things like turbocharging marine engines, twin-turbo small block Chevy engines, the Banks OttoMind electronic fuel management module, transmission control systems, exhaust scavenging systems and the iDash DataMonster.
The Banks iDash DataMonster is an extraordinary instrument that gives you the ability to see what is happening in your car so that you get the ultimate in driving experiences. Since it has the ability to monitor, display and data log things like speed, EGT, AFR, RPM and, of course, your engine temperature it is a perfect addition to fine tune your car’s performance. Additionally it lets you calculate Banks proprietary and/or patented information, things like manifold air density, intercooler effectiveness and others and it will log your car’s performance and you can also set custom alerts.
The Pedal Monster by Banks has a whopping thirty levels of control to give you adjustable low speed trim, reverse safety and ActiveSafety circuitry and best of all it is the only OBD-II connected throttle sensitivity controller. Another great product by Banks, the Banks Ram-Air, is designed to give your vehicle maximum airflow through the use of the enclosed cold-air housing, large inlet, super sized filter and excellent design with an airflow that is superior to your stock system.
The Banks’ Intercooler Systems have remarkable testing results showing twenty percent in boost gain, sixty percent in density improvement and twenty percent in air flow through to the radiator all resulting in a quicker response at the throttle, significant increase in power and increased economy. And for your DPF equipped truck owners who want a performance exhaust consider the fact that your DPF cycles acutely high temperatures through your exhaust system but unlike other systems that fail in this area, Banks has developed and patented the Sidekick™ exhaust to rid your car of these perilous temperatures.
And don’t forget to check out the other equally impressive products from Banks, like the Turbo Performance Kits, Tuners and Programmers, Power and Efficiency Systems, and Engine Braking Systems.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
