Gibson Single Side Exhaust is perfect for improved acceleration, maximum hill climbing, towing and passing power. This is our best performing Exhaust System. Exits behind the rear tire. Quieter in the cab than any other Performance Exhaust. Dyno test results show it makes maximum torque and horsepower at low-end (1800 to 3000 RPM). Horsepower gains average 10-15 and 15-20lb-ft of increase torque. Hassle free, bolt-on installation with professional looking results. No welding required. Backed by a Lifetime Limited Warranty.
Gibson 87-93 Ford Bronco Custom 5.0L 3in Cat-Back Single Exhaust - Aluminized
Cat-Back Single Exhaust System; Aluminized
Gibson Exhaust System Kit
Single Exhaust
Unable to find an exhaust system to supply the power and torque they needed for their motor home the founders of GIBSON PERFORMANCE EXHAUST decided they needed to do it themselves and went about the job of finding the best engineers and technicians they could to begin creating a prototype of what they felt they needed. They had a multiplicity of goals in mind: more power than what was available on the market, increased fuel economy, affordable, resulted in a cooler running engine, longer engine life and easy to install. That was quite a tall order right from the start, then in the early 1990’s after they had established themselves in the RV market they turned to the sport trucks and 4x4. And now, all these years later they are the most cost-effective performance Gibson exhaust system that can be used in fifty states for trucks, SUV’s, diesel, and off-road. The GIBSON exhaust and Gibson headers stayed true to their goal in providing a system that was easy to install with its bolt-on application and the aluminized or stainless steel product looks good and affords increased performance. GIBSON PERFORMANCE can now boast that from their simple beginnings they are one of the largest aftermarket performance Gibson exhaust companies in the industry and have grown the company so that it encompasses a complete line of Gibson headers, Gibson exhaust systems and accessories for trucks and tow-vehicles. GIBSON has been able to accomplish all of this because of their commitment to research and development in the California location where they use the best in software, dynamometers, flow benches and testing equipment and finish it all up with unparalleled quality control techniques. They are also cognizant of the fact that they want to deliver the most horsepower and torque in a decreased rpm range to satisfy a greater customer need especially when you want to use your vehicle for towing purposes. The GIBSON system helps to increase the exhaust flow in your engine by getting rid of the restrictions inherent in a factory system and they do this by employing a baffled and chambered structure in the muffler design. I think you will agree that they have honored their original commitments when you peruse the LMPERFORMANCE web site and see what they have to offer you to improve your vehicle’s performance and see how economical the change to this new system can be.
The GIBSON Silverado 5.3L Extreme Exhaust Cat-Back with Dual Split Rear Exit for Crew Cab 6.5ft bed available on the LMPERFORMANCE web site is a perfect example of an economic yet quality exhaust system with its outstanding exhaust tone, great looks and remarkable performance gains. And they didn’t stop with the trucks and SUV’s because GIBSON now has a line of Gibson exhausts & Gibson headers for the late model muscle cars like the one available on the LMPERFORMANCE web site for your 1998-02 Camaro in CFT stainless steel. Peruse these and all of the other parts available and find one that suits your needs and make a difference in your car, truck or SUV’s performance with an upgraded exhaust system from GIBSON. We have more great products here at Bassani Exhaust System.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
