Product Description
EBC Yellowstuff is an aramid fibre based brake compound with high brake effect form cold and is possibly one of the first ever compounds that can be used for STREET AND TRACK DRIVING. These pads do not require warm up but do get even stronger under the heat of hard driving. These are not a low dust pad and if your desire is for a low dust premium street use pad, you should consider EBC Redstuff.When considering full race use, Yellowstuff has been a strong favourite, having been used for two years in the Swedish Camaro Cup and at numerous other race events where a stock caliper system is fitted.It is also the choice of 90-percent of the Mazda MX5 Miata competitors in the UK race series and has an unblemished record as rotor friendly track pad for vehicles up to 2000 lbs weight or 200 BHP.In the USA the SCCA and NASA drivershave been testing Yellowstuff with feedback and good reports POURING in from a 543 test driver major market proving event with these groups. Read that figure again 543 test drivers.There is no guesswork here.
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
Yellowstuff Pad for Sedans or maxi brake compound for Truck and SUV Yellow pads are our highest friction range. These come in two compounds, one for Truck and SUV upgrade and one for Race and street fastest use on Sedans and Muscle cars
EBC Brakes Yellowstuff pads are high friction coefficient spirited street pads, track capable on import, European sport, and fast imports. For trucks and SUV vehicles Yellowstuff pads are great for towing/hauling as well as off-road use.
Yellowstuff Our Flagship range REAR Disc Brake Pad Set FMSI D1297
EBC 07-09 Hyundai Santa Fe 2.7 Yellowstuff Rear Brake Pads
2007 thru 2009 HYUNDAI Santa Fe (CM) 2.7
2007 thru 2009 HYUNDAI Santa Fe (CM) 3.3
Yellowstuff Street And Track Brake Pads;
DP41982R REAR EBC Yellowstuff Pads
The staff at LMPerformance knows how important performance brakes are to the driving enthusiast. LMPerformance knows you want brake pads and brake rotors you can depend on for safety and fast stops. That is why LMPerformance carries EBC Brake kits and EBC brake rotors for your sport, race and high performance vehicle.
EBC Brake Rotors & EBC Brake Kits are world leaders in the manufacture of disc brake wear components for these vehicles. EBC Brake Rotors & EBC Brake Kits has an extensive Research and Development team that is constantly improving the quality of their product. EBC Brake Rotors & EBC Brake Kits are responsible for the ECO friendly Ultimax 2 brake friction material that completely eliminated all heavy metals and sulfides. LMPerformance knows that EBC Brakes subjects every batch of brakes to rigorous testing including destructive sheer testing, density testing, sonar and ultrasonic testing, compressibility testing and friction level testing.
For quality brake pads and rotors at a great price shop lmperformance.com for your EBC Brake pads and rotors. LMPerformance is known for their competitive pricing and great customer service. LMPerformance and EBC Brakes both names you can trust for a safe driving experience.
The EBC Company is a privately owned company that dates back to 1979 with a stellar reputation in the automotive component industry for their design and production of high performance brake pads and disc/rotors who they entered the United States arena as early as the mid-1980’s to afford the American sports enthusiast an opportunity to purchase these superlative brakes. In order to continue in this successful vein EBC puts significant importance on researching new products; and to that end, they have on staff someone with 20 years of experience in the field of friction materials research and with over fifteen years of expertise in the field of brake pad manufacturing who also takes responsibility for the controlling of the efficiency of production and accuracy of their products and for finding ways to produce an even better product. One such consequence of this ongoing research and demand for innovation is the ORANGESTUFF Full Race Brake Pads that are available on the LMPERFORMANCE web site for every brand of car from the Acura to the Volvo and everything in between with a fast bed-in so that you achieve optimal performance much more rapidly than ordinary brakes and an increased friction level that is instrumental in providing shortage stoppages and which will also give increased stability when subjected to severe temperatures plus cause less damage. And EBC and LMPERFORMANCE didn’t forget about you light truck, jeep and SUV owners with rides like the Chevy Blazer, Dodge Dakota and Ford Explorer, just to name a few; they developed the EBC EXTRA DUTY brake pads just for you with its unique carbon granule based material that is race and towing friendly because they are guaranteed to stop in temperatures over 1400 degrees F. EBC prides itself on being an ECO friendly company and as a consequence their brake pads never have and never will be fabricated using Asbestos, Lead, Nickel or Ceramic Fibers but instead EBC utilizes particles of ceramic that are not harmful and they use no ANTIMONY TRISULFIDE or Sb2S3 which some researchers suspect poses a human cancer risk. Looking for great EBC brakes for your Pontiac? Check them out here.
IMAGES: Images may be a representation and may not reflect the actual product.
EBC Warranty Policy
Automotive Disc Brake Pads
The EBC Brakes warranty covers defects in materials or workmanship only. Warranty is for replacement of similar product or refund of purchase value only excluding all labour and ancillary charges such as vehicle towing, fitting, inconvenience, purchasing of other manufacturers products and is good for a period of twelve months from date of purchase or 10,000 miles of highway use. Proof of mileage will be required. Warranty is invalid if product is used for taxi/hire car, racing, rally, drifting, trackday experience driving, or any other form of competition. There is absolutely no warranty on any EBC product for race use. Warranty does not cover brake noise or normal wear and tear. Some brake pad systems cause pads to wear faster than others. Drivers/users must assess the performance and durability of EBC Brakes products themselves if any EBC product is to be used in racing.
Automotive Disc Brake Rotors
Warranty is for replacement of similar product or refund of purchase value only excluding all labour and ancillary charges such as vehicle towing, fitting, inconvenience, purchasing of other manufacturers products and is valid for a period of six months from date of purchase or 10,000 miles of highway use. Warranty is invalid if product is used for racing, rally, drifting, trackday experience driving, or any other form of competition. There is absolutely no warranty on any EBC product for race use. Drivers/users must assess the performance and durability of EBC Brakes products themselves if any EBC product is to be used in racing.
No warranty is offered for brake vibration suffered due to uneven rotor thickness wear after incorrect installation of brake rotors. It is commonly known in the brake rotor business that accurate mounting and checking of runout on brake rotors is paramount at installation and in spite of necessary warnings many mechanics still see fit to ignore this warning and make no effort whatsoever to check rotor runout. This leads to brake vibration in the 3-5,000 miles lifetime period and is not a warrantable condition. The solution for vibration at this stage is to have the rotors turned or replaced and to thoroughly clean the mounting flange on the vehicle and carefully check for runout before returning the vehicle to service use.
A proof of purchase receipt showing the date of purchase and mileage installed, endorsed by an independent mechanic who fitted the parts or a store staff member who sold you the parts will be required to be returned with all of the products purchased. To enable your vehicle to be used whilst your warranty claim is considered, should you need to purchase replacement parts this must be done by purchasing the parts from EBC themselves. In the event of a successful compensation award, we will refund the credit card that you used to buy the replacement parts in full or part depending on the nature of the claim. EBC Brakes reserves the right to make full or partial compensation at its sole discretion depending upon the condition and mileage used of the returned suspect parts. For example, if you have used the product for several thousand miles and the defect is noticed, only a partial compensation may be offered.
Policies
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
EBC dp41982r Brake Pads - Performance Review(s)
Other Popular Parts
Recently Viewed
Starting at 0% Order Now, Pay Later Learn More.
