Product Description
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), thread locking compound, marking compound with brush, and gasket. Yukon Master Overhaul kits are the most comprehensive and complete kits on the market. Yukon does extensive research to ensure that every kit is specially tailored to your application.
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), thread locking compound, marking compound with brush, and gasket. Yukon Master Overhaul kits are the most comprehensive and complete kits on the market. Yukon does extensive research to ensure that every kit is specially tailored to your application.
Fits '98 and down Dodge disconnect Dana 60. Yukon Master Overhaul Kits are the most complete kits on the market and include all differential bearings and races along with seals, shims and high quality small parts.
Yukon Master Overhaul kit for 98/down Dana 60 and 61 front disconnect differential.
Yukon Gear Master Overhaul Kit For 98 & Down Dana 60 and 61 Front Disconnect Diff
Yukon Differential Master Overhaul Kit
Yukon Gear Differential Parts Kit
Differential Rebuild Kit
Yukon Differential M
DiffrlPartsKit
Striving to exceed a customer’s expectations certainly speaks well for a company and Yukon Gear & Axle purports to be such a company. Quality aftermarket drivetrain parts are essential whether you use your car on the road or on the track but the rough conditions inherent in racing make your drivetrain choice critical so that you have fewer pit stops and a safer race. With the help of their in-house engineering team Yukon aims for excellence in product development and utilizes top notch software to design drivetrain parts that are quality controlled for excellence. Whether your genre is a diesel truck, rock crawler, circle track, drag racing or just general performance Yukon has a drivetrain part to meet your needs.
Looking for an axle part? Well Yukon has axle parts for your vehicle that include axle bearing retainers, axle bearing and seals, axle studs and lug nuts for a variety of vehicles Need help with your differential then Yukon can help you with bearing kits, carrier installation kits, master differential rebuild kits, minimum installation kits or pinion bearing kits.
Trying to build a strong rear end then you won’t go wrong with the Yukon Gear and Axle Kits since their bearing, installation and overhaul kits use Timken bearings so that they assure you of long bearing life as well as strength. And the Hard Core Locking Hubs from Yukon are heavy duty with all steel construction and Chromoly internals for durability. Their Master Overhaul Bearing Kit from Yukon is the most complete kit on the market. The rear performance axle from Yukon Gear may be just what you need for a long lasting and strong rear performance axle since it is touted to be thirty seven percent stronger than the competition.
And why not replace your vulnerable and expensive factory unit bearing with the Yukon Spin Free Kit so that you have tapered roller bearings that reduce drag and thus enjoy an increase in fuel economy and, of course, the kit includes the Yukon Hardcore Locking hubs for driving selecability and reduction of wear on other components. And if you have shims on hand try the bearing installation kit or the minimum installation kit that include all the necessary small parts like crush sleeve, pinion sleeve, pinion shims and more.
The Yukon ring and pinions are developed for rear wheel passenger vehicles and light duty trucks and they offer lines that are suitable for performance, racing and off-road with a smooth finish and easy installation. In the market for a locker or posi traction then, of course, Yukon can supply those as well offering you a choice of a Zip Locker that is air operated for on demand traction or a Grizzly Locker for off-road or performance use. The Duragrip Posi Traction with its impressive four springs is perfect for your car, truck or SUV and the Ford Traction-Lok by Yukon is available in two performance ratings, street and race.
When trying to rebuild your differential then you won’t want to be without an installation kit and Yukon has one of the most complete kits on the market and it is especially designed for each application with most having almost exclusively Timkin bearings and of course the components are of superior quality.
* This is a universal item without fitment details. Please make sure this item is for your application. LMP does not guarantee fitment on universal items.
IMAGES: Images may be a representation and may not reflect the actual product.
Yukon Gear & Axle Warranty Policy
YUKON LIMITED WARRANTY
Yukon Gear & Axle (“Yukon”) warrants the original retail purchaser that all Yukon products will be free from defects in materials and workmanship for the periods shown herein. Yukon makes no other warranty of any kind, express or implied. All other warranties, including but not limited to an implied warranty of merchantability or fitness for a particular purpose, are excluded. This warranty is offered provided that the Yukon product has been installed and maintained in accordance with Yukon instructions, and that it has not been subject to modification, accident, abnormal use or misuse. At Yukon’s discretion, this warranty may be voided if installation of Yukon product(s) occurs on vehicles with tires that exceed Yukon Maximum Recommended Tire Size.
Upon notification of a warranty claim, Yukon shall investigate the claim of defect, and, in the event of a verified defect, shall, at their sole choice, either repair the defective product, replace it, or refund the purchase price.
This warranty does not cover, and Yukon shall not be liable for, incidental or consequential damages, including loss of time, road service charges, labor charges, inconvenience, loss of vehicle use, loss of revenues, or loss or damage to personal property (including loss or damage to vehicle parts due to the failure of the Yukon product)*. In addition, this warranty does not cover, and Yukon shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Yukon Gear & Axle products, except where such agreements are within the provisions of this Warranty statement. Also, this warranty does not cover damage to the axle caused by or facilitated by failure of a non-Yukon component.
Policies
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Yukon Gear & Axle yk d60-dis-a Differential Overhaul Kit Review(s)
Other Popular Parts
Recently Viewed
Starting at 0% Order Now, Pay Later Learn More.
