• Maxtrac 05-18 Toyota Tacoma 2WD 6 Lug 4in/2in MaxPro Elite Spindle Lift Kit w/FOX Shocks K886842F


Product Description

The Maxtrac Suspension 4-inch lift for the Toyota Tacoma is a cost-effective way to lift your 2WD wheel drive truck without breaking the budget. We do this by taking a factory height spindle and lowering the wheel hub position, which in turn raises the vehicle up while maintaining a factory-like ride and turning radius. By doing this, you eliminate the need to install expensive crossmembers that are labor intensive and require factory frame cuts. The spindles come with extended, DOT compliant, stainless steel braided brake lines. The rear lift comes with Fox 2.0 monotube shocks, lift blocks and U-bolts. The end result, you achieve a lifted truck with a leveled stance for a fraction of the cost of a standard 4WD kit.

MaxTrac 05-18 Toyota Tacoma 2WD 6 Lug 4in/2in MaxPro Elite Spindle Lift Kit w/FOX Shocks

LftKt-Suspw/Shock

706840/906820F

If you are ready to lift, level or lower your Truck or SUV 2 WD or 4WD vehicle then give some consideration to a company that prides itself on designing and building suspension products that won’t break your bank and best of all are of first-class quality. That company is none other than MaxTrac Suspension, a product of truck aficionados in 2010 who had a mind to design and build steller yet affordable suspension products. Hard work and dedication paid off for MaxTrac Suspension because they are recognized as one of the premier designers and manufacturers of said products.

Because MaxTrac is able to provide you with not one but three types of suspension product lines lift, leveling and lowering and that puts it far ahead of its competitors. Couple that with their patented designed spindles and you can see how they are a company that is hard to beat. So if you are in the market for one or the other or a combination then check out the products available from MaxTrac Suspension.

If Lift is what you are after for your truck or SUV then you won’t go wrong with the MaxTrac lift system because you will get a precise amount of lift from the MaxTrac spindles and exceptional quality since they are either ductile-iron or forged aluminum and it is hard to beat that combination. And if you are still not convinced then consider the fact that most of the Lift systems are bolt on and will not necessitate little or no modification to your prized vehicle so no problem there.

Not looking to lift but rather to lowering your Ford, Dodge, Chevy or GMC truck or SUV then look no further than MaxTrac for that also. And these lowering kits also feature those impressive spindles to give you that precise lowering you crave and are built to last from ductile-iron or forged aluminum and what can be better than that. Of course they offer a wide range of components to provide moderate to extreme lowering options to give you a smooth ride and are easy to install so what else could you ask for.

Want to install larger wheels and tires on your truck but still want a great ride then look no further than MaxTrac because they have the solution for you with the MaxTrac leveling kits. And no worries here because all of the parts are fabricated right here in the old USA and lower prices will be an added bonus so what are you waiting for?

Allight what about all those component parts you want like blocks and u-bolts, coils, shackles, shocks and spindles, well surprise, MaxTrac has those too so no need to worry there. By now I am sure you can see that MaxTrac can solve your suspension product needs at an affordable price.

Looking for affordability and quality then peruse the MaxTrac suspension parts on LMPERFORMANCE.COM and find the part that meets yous suspension needs in one spot and at an affordable price.

Now Available: Max Trac Suspension is proud to announce our 4.5” lift kit K949942 for the 2020 Jeep Gladiator (JT) platform. Our engineers have been working overtime to come up with a kit that will not only drive great on the road, but perform off the road as well. This kit features American made dual rate front and rear coil springs. These springs are the heart and soul of our kit, and are capable of supporting the weight of any other accessories you’d like to add to your Jeep. We also include our forged steel adjustable track bar which can be easily adjusted and includes factory ends. This kit comes with bump stop extensions, sway bar links, and brake line extensions, with the option to upgrade to either Max Trac shocks or Fox 2.0 aluminum body shocks. Whether you daily drive or trail your Gladiator, Max Trac Suspension has you covered.

IMAGES: Images may be a representation and may not reflect the actual product.

Maxtrac Warranty Policy

WARRANTY

POLICY

MAXTRAC SUSPENSIONS, LLC. reserves the right to change or modify these Terms and Conditions at any time as deemed necessary. All Terms and Conditions ar0e effective August 1st, 2010. These terms and conditions supersede any other implied terms expressed in writing or verbal.

Application listings in this catalog have been carefully checked for each model and year denoted. MAXTRAC SUSPENSION reserves the right to update as necessary, without notice, and will not be held responsible for misprints, changes, or variations made by vehicle manufacturers.

WARRANTY

Limited Lifetime Warranty is extended to the full line of MAXTRAC SUSPENSION, to be free from defects in workmanship and materials. MAXTRAC’s obligation is limited to repair or replacement at MAXTRAC’s discretion. MAXTRAC’s Warranty does not cover any costs incurred due to the installation or removal of products, towing costs, freight costs, rental vehicles, or incidental or associated costs.

Warranty does not cover finish, race applications, incorrect installations, abuse, neglect, or commercial vehicles.

Policies

California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov

California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.

Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.

FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.

IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.

TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.

SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.

Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.

Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.

Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.

Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.

Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.

Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.

Maxtrac K886842F Steering Knuckles & Spindle Review(s)

Other Popular Parts

Recently Viewed