A simple 30 minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high quality case & wire harness with factory style connectors for an easy plug & play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) . This performance module increase turbo boost. It improves vehicle performance and throttle response. Direct Plug & Play Power: This quick and easy plug & play SCORCHER GT module adds significant power by altering pressure sensor signals to increase turbo boost to improve vehicle efficiency, power and throttle response. In-Cabin On-the-Fly Power Adjustments. SCORCHER GT modules features In-Cabin On-the-Fly power adjustment to accommodate any situation. This adjustment is controlled by via LED light switch with a button that can be easily mounted in any location in the cab in. High Quality Case & Wire Harness: aFe SCORCHER GT modules uses high quality aluminum extrusion black powder-coated enclosure casing and factory style connectors which requires no modification to your factory harness. These factory style connectors, plugs directly into the stock wiring harness connectors and sensors. High Precision and Quality: SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products. aFe POWER does not recommend to use with any other tuners or modules. aFe POWER recommends to use the SCORCHER GT module in Sport or Sport+ settings during towing. This SCORCHER GT is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.
SCORCHER GT Power Module VW Golf (VI) 09-16 I4-1.4L (t) TSI
aFe Scorcher GT Module 09-16 VW Golf (VI) L4-1.4L (t) TSI
VW Golf (VI) 09-16 I4-1.4L (t) TSI
SCORCHER GT Power Module
Available to Order
Power Module
You can feel confident when you choose an ADVANCED FLOW ENGINEERING (AFE) part because it is backed up by a company that has been in the business of creating automotive aftermarket performance parts since 1999 and their factory and headquarters are right here in the USA in Corona, California, with two substantial locations there, so they are here to stay and will be there if you need them. They originally opened the company to provide a much needed high performance aftermarket air filter and then later designed and manufactured products that include air filters, air intake and exhaust systems for most late model cars and trucks. They are responsible for introducing diesel fluid filters, filters and intakes for power sport vehicles, intercoolers for diesel applications. They were not finished yet and joined the differential cover and transmission market, released a new turbocharger and the Scorcher Programmer product line. Because AFE knew that individual driving situations required an air filter peculiar to a given situation, they designed three versions of their air filter, the PRO 5R, PRO GUARD 7 and PRO DRY S to be sure they were meeting all your driving needs, with the Pro 5R being an oiled 5-layer media, the Pro Guard 7 being an oiled 7 layer media design and the Pro Dry requiring no oil. These air filters are a simple way to improve your car’s performance and if you are ready to make the change away from the factory restrictive air filter and upgrade to a high-flow aftermarket filter you might want to consider the AFE short ram intake system, designed with a shorter inlet length that installs easily under your car’s hood. And yet for a more aggressive option, consider an AFE cold air intake system to l reduce the air temperature and increase airflow by removing the restrictive air box installed by the factory and replacing it by tubes that give a straightforward flow of air thus resulting in an increase in horsepower.
From the information mentioned above, it is evident to the team at LMPERFORMANCE that AFE does not just sit back and do the same old thing but they are constantly striving to improve and that ingenuity gets passed on to you the consumer in the guise of better aftermarket parts for a better performing car. The result of all this is over 2,500 applications that were all developed in house and best of all are quality tested with the company’s DYNOJET and flow bench tested so that you can feel assured you are getting a premier quality product.
A review of the myriad of Advanced Flow Engineering parts on the LMPERFORMANCE web site will convince you that this is a company worth considering when it comes to aftermarket exhaust parts for your car whether it be something as simple as an improved air filter or as dramatic as a change to a cold air intake system. The choices are there and you will be assured of a competitive price and free shipping when you order from LMPERFORMANCE and AFE.
IMAGES: Images may be a representation and may not reflect the actual product.
PRODUCT WARRANTY
aFe warrants our products to be free from manufacturer’s defects due to workmanship and materials.
The warranty period begins on the original invoice date and covers the applicable period listed below.
This warranty applies only to the original purchaser of the product and is non-transferrable.
Proof of purchase of the aFe product is required for all warranty claims.
Warranty is valid provided aFe instructions for installation and/or cleaning were properly followed.
Proper maintenance with regular inspections of product is required to insure warranty coverage.
Damage due to improper installation, abuse, unauthorized repair or alteration is not warranted.
Incidental or consequential damages or cost, including installation and removal of part, incurred due to failure of aFe product is not covered under this warranty.
All warranty is limited to the repair and/or replacement of the aFe product.
Most Warranties Duration is 2 Years. See AFE for details regarding specific Warranties and Duration.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
