Boundary Ford Coyote Mustang/GT350 V8 Billet Oil Pump Gear, Boundary Ford F-150 5.0L V8 Billet Oil Pump Gear
Boundary Ford Coyote Mustang/GT350 V8 Billet Oil Pump Gear, Boundary Ford F-150 5.0L V8 Billet Oil Pump Gear
Boundary oil pump gears are 100% manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core. After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish. What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 2000whp, with higher efficiency, less friction, and backed by one of the industries best warrantys.
Oil Pump Gear Features
- Mirror Finished and Surface Hardened
- Surface Ground gears for the ultimate in fitment and performance
- Indestructible chromoly core
- Inner and outer gear machined in matched sets
- Our own race inspired gerotor design for flow and strength
- Each set hand, machine, and hardness inspected with Blueprinting Report
Boundary Billet Oil Pump Gear Ford Coyote V8 Mustang AND GT350 2011-UP Boundary Pumps
Boundary oil pump gears are 100 percent manufactured in our Dallas, Texas production facility. We start by quenching our chromoly billets from extreme heat and then temper it to tough indestructible core. After machining we apply our ColdFlow surface hardening process and complete it to a Mirror Finish.
What does all this give you? It gives you a pump with stability over 9000 RPM, proven in excess of 2000whp, with higher efficiency, less friction, and backed by one of the industries best warranty's.
Oil Pump Gear Features
- Mirror Finished and Surface Hardened
- Surface Ground gears for the ultimate in fitment and performance
- Indestructible chromoly core
- Inner and outer gear machined in matched sets
- Our own race inspired gerotor design for flow and strength
- Each set hand, machine, and hardness inspected with Blueprinting Report
Fitments:
- 2015-2017 Ford F-150 King Ranch
- 2015-2017 Ford F-150 Lariat
- 2015-2017 Ford F-150 Platinum
- 2015 2020 Ford Mustang Shelby GT350
- 2015-2017 Ford F-150 XL
- 2015-2017 Ford F-150 XLT
- 2016 2017 Ford F-150 Limited
- 2016 2017 Ford F-150 SSV
- 2017 2017 Ford F-150 Raptor
Boundary Ford Coyote Mustang/GT350 V8 Billet Oil Pump Gear, Boundary Ford F-150 5.0L V8 Billet Oil Pump Gear
The team at Late Model Performance knows how important your car’s oil pump is in circulating your engine’s oil so that it properly lubricates your car's bearings and they also know it helps to keep your engine cool. So we know you want an oil pump you can count on from a company you can trust particularly if you are a street or track racer who pushes their ride to the limit. Boundary Racing Pumps is just such a company with an excellent reputation that dates back to its founding in 2003 when it specialized in manufacturing parts for the racing arena. Success in this arena led to the launching of their gear products in 2005. So you can see Boundary has a considerable history in the aftermarket pump arena.
Boundary is housed right here in the USA in Dallas, Texas where their units are manufactured in house. Quality and consistency are the hallmark of the Boundary Racing Pumps and the inhouse facility has up-to-the-minute CNC milling and turning equipment to assure you of a primo product. And best of all Boundary has as their only goal delivering you the premier lubrication system so they differ from companies who manufacture a multiplicity of products. The Boundary goal is to give you the best aftermarket lubrication system available for your high performance needs.
Just take a look at your OEM oil pump and see how its quality will differ from the Boundary Racing Pump. The OEM oil pump is manufactured using powdered steel to save money but the Boundary Racing Pump is manufactured with billet steel so that rather than getting less than 6000 PSI of strength you are getting nearly 110,000 PSI in yield strength.
Boundary wanted to create a superlative combination of heat treat and steel grade so that they could give you the epitome of oil pump material and they did not want to leave this to chance but accomplished this by working with metallurgists to achieve this end. And to further assure you of a quality product they used avant garde FEA simulations to break down each oil pump for weaknesses and then subjected the pumps to debris impacts, vibration, and offside loads so that they left no stone unturned in their quest for the best. Boundary doesn’t stop there but they go on to test and retest until they are satisfied with the product strength.
If you are looking for a primo oil pump that will produce significantly more oil flow, more pressure and accomplish this earlier in the RPM band then Boundary Racing Pumps fit the bill. Whether you have a street or race vehicle you will not be disappointed in the quality and performance of the Boundary Racing Pumps since Boundary Pumps are utilized by engines producing up to 550hp/L with success.
You can feel confident that your pump was designed and manufactured by Boundary because they take pride in the fact that they do not outsource their machining or design work but do everything in house with a knowledgeable and dedicated team and you can’t ask for more than that.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
