Edelbrock Carburetor Thunder Series 4-Barrel 800 CFM Manual Choke Calibration Satin Finish 1912

With our innovative Annular Flow Booster technology; Edelbrock brings superior fuel atomization to all high-horsepower small-and big-block engines with the AVS2 800 CFM Manual Choke Carburetor #1912 that is specially calibrated to make power. Annular Flow Boosters deliver near EFI-like drivability that you can feel as soon as you step on the gas. Fuel distribution is refined by eight equally spaced orifices in the booster rings that replace down-leg boosters which simply dump raw fuel into the venturi. Flat spots are completely eliminated; and throttle response in the low-to mid-RPM range is improved tremendously with no sacrificing of that top-end power that Edelbrock is known for. AVS2 carbs are unaffected by engine backfires since there are no power valves to blow out. For fast and simple part-throttle tuning; metering rods and springs can be changed in seconds without carburetor removal or fuel draining. Our AVS2 carbs have the unique ability to hold a tune when compared to other carburetors. Your tuning and adjustments stay unchanged; so performance remains consistent. Updated primary and secondary booster clusters in the AVS2 offer the most accurate and up-to-date calibration available for today s fuels and octane levels. Additionally; our Qwik-Tune Secondary Air Valve design allows for limitless calibration of the secondary circuit. Adjustments can be with simple hand tools in seconds to suit your application. The AVS2 features a two-piece design that allows you to make float level adjustments or replace internal components without draining the fuel from the carburetor or removing it from the engine. The AVS2 800 CFM carburetor is available with either manual (#1912) or electric (#1913) choke in satin or chrome-like EnduraShine finish. All AVS2 carburetors are designed; manufactured; assembled and calibrated by Edelbrock in the USA.

Edelbrock; Edelbrock Carburetor; Edelbrock AVS2; AVS2; AVS2 Series carbs; Annular Flow Booster; Dual-Quads; High-Performance Carbs; Dual Four Barrel; Engines; Fuel systems; intake systems; Edelbrock Performer carbs; Performer Series carbs; Thunder Series AVS carbs; Carter AFB; Holley carbs; Double-Pumper carb; Demon carbs; Summit Racing carbs; Quick Fuel

Edelbrock Carburetor Thunder Series 4-Barrel 800 CFM Manual Choke Calibration Satin Finish

AVS2 Carburetor #1912 800 CFM With Manual Choke; Satin Finish (Non-EGR)

AVS2 800 CFM #1912 Carburetor, Manual Choke for High-Horsepower Engine

Carb, Thunder Series Avs2 800 Cfm (Manual Choke).

CARB; THUNDER SERIES AVS2 800 CFM (MANUAL CHOKE)

Thunder Series AVS2 Carburetor

Edelbrock Carburetor

CARBURETOR

AVS2 Carb

If you need a throttle body, lower or upper control arm, panhard rod or shock tower brace for your Camaro, Firebird or Mustang you can't go wrong with one of the Edelbrock performer intake parts, or Edelbrock manifolds from LMPerformance.com. You will get a top quality product, carefully selected by the LMPerformance staff.

LMPerformance selected Edelbrock performer intake products, and Edelbrock manifolds for its customers because they know you can trust a company that has been in business since 1938 and has manufactured its core products in the USA with a guarantee of quality and performance. The quality of the Edelbrock throttle body can be seen in the larger than stock throttle bore that allows increased air volume and more power. In addition, the Edelbrock throttle body has sealed throttle shaft ball bearings to allow for safe, smooth operation. To assure top performance Edelbrock includes on most of its applications (check listings for applications on their web site) a brand new throttle position sensor (TPS) that is pre-installed and factory set with the same high-tech equipment used by Original Equipment manufacturers.

The EDELBROCK Company can trace its beginnings to a simple thing like the purchase of a 1932 Ford Roadster by its founder VIC EDELBROCK, SR whose purchase was the inspiration for the original EDELBROCK performer intake manifold, the “SLINGSHOT” and then ultimately the introduction of the EDELBROCK POWER AND SPEED EQUIPMENT catalog making the EDELBROCK manifold parts available to the public. The company continued to grow over the years and subsequently the company opened their own facility and began dyno testing on a small block Chevrolet engine which culminated in the production of the three carb Edelbrock intake manifold, the six-carb Ram Log manifold and the Cross Ram manifold and later the company went on to achieve even greater success with the C-4B manifold, the Tunnel Ram, Tarantula and STREETMASTER manifolds. From these humble beginnings has developed a company that now has six locations throughout the United States with facilities for Research and Development, Manufacturing, Primo Testing, Advertising and Technical Support and it is all the result of one man’s love for racing and his determination to make something better and not be content with the mundane-he wanted to win races after all. Following in this path of demanding excellence the EDELBROCK intake Company continues to discover and improve high performance products today for car enthusiasts like you with things like the EDELBROCK Rear Lower Control Arm for your Mustang 2005-11 V6 that was constructed to improve your Mustang’s ability to turn more easily and stabilize the rear suspension because they know that ordinary control arms installed when your car was built cannot accommodate the aggressive driving Mustang owners who race witness and they were determined to give you something better. Find these and other outstanding EDELBROCK performance parts on the LMPERFORMANCE web site and see how an aftermarket performance part by EDELBROCK can make a difference in your car’s handling.

Since 2001 the folks at LMPerformance.com have researched the best quality parts for your performance vehicle. This research led them to the decision to carry the Edelbrock throttle body, Edelbrock performer intake, Edelbrock manifold, lower and upper control arm, panhard rod and shock tower brace and to offer them to their customers at the best price. Looking for more great intake products? Check out this Trailblazer SS Cold Air Intake.

If you need a throttle body, lower or upper control arm, panhard rod or shock tower brace for your Camaro, Firebird or Mustang you can't go wrong with one of the Edelbrock parts from LMPerformance.com. You will get a top quality product, carefully selected by the LMPerformance staff.

* This is a universal item without fitment details. Please make sure this item is for your application. LMP does not guarantee fitment on universal items.

IMAGES: Images may be a representation and may not reflect the actual product.