Edelbrock Supercharger Stage 1 - Street Kit 16-18 Chevrolet Camaro 6 2L LT1 Manual w/o Tuner 155950

If you?re the owner of a 2016-18 Chevy Camaro SS in search of bolt-on horsepower; our new Edelbrock Supercharger System W/O TUNER #155950 is a 50-state emissions-legal power adder designed for use with the 6.2L LT1 engine. This Stage 1 system features an Edelbrock manifold that houses Eatons biggest R2650 TVS rotor assembly with 170-degree high-twist lobes; bigger bearings and beefier timing gears for unparalleled efficiency and reliability. This is a true bolt-on supercharger kit that requires no additional modifications to the stock 6.2L engine and fits under the Camaro hood with no cutting or modification. With a dyno-tested output of 609 horsepower and 587 ft-lbs of torque; the increase in power comes with little to no loss in fuel economy thanks to our superchargers integrated bypass valve that mitigates parasitic power loss during normal driving. For those who want more power; the R2650 supercharger can support more than 1;000 horsepower at the flywheel with the right combination of parts. The Edelbrock supercharger for the Camaro has a self-contained lubrication system with a 100;000-mile service interval; a high-capacity Dual-Pass 3-Core (DP3C) integrated intercooler and comes finished in a durable black powder-coating. Each kit includes a complete set of preformed hoses; hardware and a full-color manual that provides step-by-step instructions for ease of installation (Note: Kit #155950 does not include the handheld tuner). This system is designed and manufactured in the USA and is covered by our industry-leading 3-year/36;000-mile warranty.

Now you can bolt-on an Edelbrock E-Force Supercharger system and boost the power in your Ford F-150. The Ford F-150 Supercharger systems are specially designed for each application and will allow you to boost your performance up to an impressive 478 flywheel horsepower and 504 ft-lbs. of torque. These supercharger systems feature 14 long intake runners for maximum low end torque making them ideal for towing and off-road performance applications.

Edelbrock; Supercharger; Blower; Forced Induction; Turbochargers; Engine; Boost; Chevrolet; Chevy; Bowtie; GM; Chevy Camaro; Camaro; F-body; Power Adders; 6.2L V8 engine; Chevy Performance

Edelbrock Supercharger Stage 1 - Street Kit 16-18 Chevrolet Camaro 6 2L LT1 Manual w/o Tuner

Sc Chevy Camaro R2650 2016-17 6.2L Lt1 Direct Injection V8 Engines Manual No Tuner.

SC CHEVY CAMARO R2650 2016-17 6.2L LT1 DIRECT INJECTION V8 ENGINES MANUAL NO TUNER

Edelbrock Stg 1 Supercharger #155950 16-18 Camaro SS LT1 6.2L All Trans W/O Tune

SC CHEVY CAMARO R2650 2016-17 6.2L LT1 DIRECT INJECTION V8 ENGINES MANUAL NO TUN

E-Force Supercharger System W/ TUNER #155950 for 2016-18 Camaro 6.2L LT1

Chevrolet:Small-Block Gen V LT1:376 (6.2L)

Edelbrock Supercharger

If you need a throttle body, lower or upper control arm, panhard rod or shock tower brace for your Camaro, Firebird or Mustang you can't go wrong with one of the Edelbrock performer intake parts, or Edelbrock manifolds from LMPerformance.com. You will get a top quality product, carefully selected by the LMPerformance staff.

LMPerformance selected Edelbrock performer intake products, and Edelbrock manifolds for its customers because they know you can trust a company that has been in business since 1938 and has manufactured its core products in the USA with a guarantee of quality and performance. The quality of the Edelbrock throttle body can be seen in the larger than stock throttle bore that allows increased air volume and more power. In addition, the Edelbrock throttle body has sealed throttle shaft ball bearings to allow for safe, smooth operation. To assure top performance Edelbrock includes on most of its applications (check listings for applications on their web site) a brand new throttle position sensor (TPS) that is pre-installed and factory set with the same high-tech equipment used by Original Equipment manufacturers.

The EDELBROCK Company can trace its beginnings to a simple thing like the purchase of a 1932 Ford Roadster by its founder VIC EDELBROCK, SR whose purchase was the inspiration for the original EDELBROCK performer intake manifold, the “SLINGSHOT” and then ultimately the introduction of the EDELBROCK POWER AND SPEED EQUIPMENT catalog making the EDELBROCK manifold parts available to the public. The company continued to grow over the years and subsequently the company opened their own facility and began dyno testing on a small block Chevrolet engine which culminated in the production of the three carb Edelbrock intake manifold, the six-carb Ram Log manifold and the Cross Ram manifold and later the company went on to achieve even greater success with the C-4B manifold, the Tunnel Ram, Tarantula and STREETMASTER manifolds. From these humble beginnings has developed a company that now has six locations throughout the United States with facilities for Research and Development, Manufacturing, Primo Testing, Advertising and Technical Support and it is all the result of one man’s love for racing and his determination to make something better and not be content with the mundane-he wanted to win races after all. Following in this path of demanding excellence the EDELBROCK intake Company continues to discover and improve high performance products today for car enthusiasts like you with things like the EDELBROCK Rear Lower Control Arm for your Mustang 2005-11 V6 that was constructed to improve your Mustang’s ability to turn more easily and stabilize the rear suspension because they know that ordinary control arms installed when your car was built cannot accommodate the aggressive driving Mustang owners who race witness and they were determined to give you something better. Find these and other outstanding EDELBROCK performance parts on the LMPERFORMANCE web site and see how an aftermarket performance part by EDELBROCK can make a difference in your car’s handling.

Since 2001 the folks at LMPerformance.com have researched the best quality parts for your performance vehicle. This research led them to the decision to carry the Edelbrock throttle body, Edelbrock performer intake, Edelbrock manifold, lower and upper control arm, panhard rod and shock tower brace and to offer them to their customers at the best price. Looking for more great intake products? Check out this Trailblazer SS Cold Air Intake.

If you need a throttle body, lower or upper control arm, panhard rod or shock tower brace for your Camaro, Firebird or Mustang you can't go wrong with one of the Edelbrock parts from LMPerformance.com. You will get a top quality product, carefully selected by the LMPerformance staff.

IMAGES: Images may be a representation and may not reflect the actual product.