Edelbrock Intake Manifold Perf Eps SBC w/ Oil Fill Tube and Breather Black 27033

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design thats intunedin for peak torque at 3500 rpm on a 350-inch engine and its ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold No.2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5plus ft-lbs. of torque for more performance where you need it most. Performer EPS manifold No.2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. No.2703 has the same performance features as the Performer EPS No.2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as No.4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. Available with satin, polished, black or EnduraShineG?? finish

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design thats tuned for peak torque at 3500 rpm on a 350-inch engine and its ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. #2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. Available with satin, polished, black or EnduraShineÖ finish

Designed for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design thats tuned for peak torque at 3500 rpm on a 350-inch engine and its ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. #2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. Available with satin, polished, black or EnduraShine finish

Chevrolet:Small-Block Gen I:265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L)

27033; Chevy; Chevrolet; Edelbrock; Intake Manifold; Intake; Manifold; Dual-Plane; Performer EPS; Black Powder Coated

Edelbrock Intake Manifold Perf Eps SBC w/ Oil Fill Tube and Breather Black

Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy; Black Finish

Edelbrock INTAKE MANIFOLD PERF EPS SBC W/OIL FILL TUBE/BREATHER BLACK

INTAKE MANIFOLD PERF EPS SBC W/OIL FILL TUBE/BREATHER BLACK

Engine Intake Manifold

Edelbrock Manifold

If you need a throttle body, lower or upper control arm, panhard rod or shock tower brace for your Camaro, Firebird or Mustang you can't go wrong with one of the Edelbrock performer intake parts, or Edelbrock manifolds from LMPerformance.com. You will get a top quality product, carefully selected by the LMPerformance staff.

LMPerformance selected Edelbrock performer intake products, and Edelbrock manifolds for its customers because they know you can trust a company that has been in business since 1938 and has manufactured its core products in the USA with a guarantee of quality and performance. The quality of the Edelbrock throttle body can be seen in the larger than stock throttle bore that allows increased air volume and more power. In addition, the Edelbrock throttle body has sealed throttle shaft ball bearings to allow for safe, smooth operation. To assure top performance Edelbrock includes on most of its applications (check listings for applications on their web site) a brand new throttle position sensor (TPS) that is pre-installed and factory set with the same high-tech equipment used by Original Equipment manufacturers.

The EDELBROCK Company can trace its beginnings to a simple thing like the purchase of a 1932 Ford Roadster by its founder VIC EDELBROCK, SR whose purchase was the inspiration for the original EDELBROCK performer intake manifold, the “SLINGSHOT” and then ultimately the introduction of the EDELBROCK POWER AND SPEED EQUIPMENT catalog making the EDELBROCK manifold parts available to the public. The company continued to grow over the years and subsequently the company opened their own facility and began dyno testing on a small block Chevrolet engine which culminated in the production of the three carb Edelbrock intake manifold, the six-carb Ram Log manifold and the Cross Ram manifold and later the company went on to achieve even greater success with the C-4B manifold, the Tunnel Ram, Tarantula and STREETMASTER manifolds. From these humble beginnings has developed a company that now has six locations throughout the United States with facilities for Research and Development, Manufacturing, Primo Testing, Advertising and Technical Support and it is all the result of one man’s love for racing and his determination to make something better and not be content with the mundane-he wanted to win races after all. Following in this path of demanding excellence the EDELBROCK intake Company continues to discover and improve high performance products today for car enthusiasts like you with things like the EDELBROCK Rear Lower Control Arm for your Mustang 2005-11 V6 that was constructed to improve your Mustang’s ability to turn more easily and stabilize the rear suspension because they know that ordinary control arms installed when your car was built cannot accommodate the aggressive driving Mustang owners who race witness and they were determined to give you something better. Find these and other outstanding EDELBROCK performance parts on the LMPERFORMANCE web site and see how an aftermarket performance part by EDELBROCK can make a difference in your car’s handling.

Since 2001 the folks at LMPerformance.com have researched the best quality parts for your performance vehicle. This research led them to the decision to carry the Edelbrock throttle body, Edelbrock performer intake, Edelbrock manifold, lower and upper control arm, panhard rod and shock tower brace and to offer them to their customers at the best price. Looking for more great intake products? Check out this Trailblazer SS Cold Air Intake.

If you need a throttle body, lower or upper control arm, panhard rod or shock tower brace for your Camaro, Firebird or Mustang you can't go wrong with one of the Edelbrock parts from LMPerformance.com. You will get a top quality product, carefully selected by the LMPerformance staff.

* This is a universal item without fitment details. Please make sure this item is for your application. LMP does not guarantee fitment on universal items.

IMAGES: Images may be a representation and may not reflect the actual product.