Wow, how do I start to tell the world why NX is different and better than any other company? Lets start with the NX philosophy: All components must be of the highest quality, no off shore junk; 99% of NX products are produced and assembled in the USA; All NX components and systems must be tested and proven before they are shipped to any customers; All horsepower claims must be accurate and dyno proven at the wheel! NX copies no one; we lead the industry in technology and innovation; Never be satisfied with the status quo; Always give the customer more than he expects!
Nitrous Express 13-16 Dodge Dart 1.4L Turbo Nitrous Plate Kit 50-100HP Jet Pack
JET PACK; DODGE DART 1.4L Turbo PLATE SYSTEM; 50-100HP
Nitrous; dart; dodge
N2OJet
The founders of Nitrous Express didn’t want to “build a better mousetrap” but they did want to create a primo nitrous system unlike any on the market so in 1996 they set about doing just that. They were able to accomplish this because of their ability to manufacture their components with the hot rod adjustments incorporated into the system. As a consequence Nitrous Express was able to offer a product that could be used “as is” and the company continued on successfully improving their products and increasing their product line.
The elimination of the turbulence points seen in competitive systems was paramount to the team and Nitrous Express and to this end they designed their unique bottle valve. The NX “Lightning” bottle valve, for example, has a solo 45 degree angle to its discharge point thus eliminating the severe 90 degree turn seen in the competitors’ bottle valves. In addition the exclusive bottle nipple designed by Nitrous Express serves to transition nitrous from the valve to the supply hose with no internal steps or restrictions. All of these necessary improvements result in more horsepower per pound of nitrous than any of its competitors products.
If you were to inspect the Nitrous Express 500 bottle valves you would see a direct flow path that results in the elimination of gaseous bubbles that can cause a decrease in horsepower and the Nitrous 500 can be used on systems up to 2000 nitrous horsepower. The success of the Nitrous Express 500 bottle is attributed to the fact that it has a .625” siphon tube and a solo 45 degree turn and fittings that can be used with an 10AN supply line restriction free.
Because the Nitrous Express 500 is free of blockages, sharp edges and tight turns you can expect a smooth laminar flow of nitrous, minimal boiling and minimal gaseous nitrous in the flow path to the solenoid. All of the aforementioned result in a nitrous system producing more clean horsepower and one that is much more effortless to tune. And add to this the fact that the 500 is CNC machined using billet aluminum and is nearly one half pound lighter that commensurate brass valves, has dual gauge ports and interconvertible nipples allowing for it to be used by a multiplicity of supply lines and you have a sure winner.
Realizing that the solenoids are an important part of the system and need a good flow path, Nitrous Express developed the NX Lightning solenoids with an integrated purge port that permits connection of a purge value to the solenoid. The elimination of trapped air between the fuel pressure regulator and the fuel solenoid was accomplished by a fuel bypass port that permits the connection of a small return line to the tank.
The high-tech Nitrous Express plates are the most premier nitrous plates available and are without spray bars to sag, split, block airflow, or damage and afford the best fit. Maximum horsepower is achieved because the internal CNC machines passages result in primo nitrous/fuel distribution and unrivaled cylinder to cylinder distribution.
Finally in 2018 Nitrous Express added to their product line by acquiring the company that manufactured impressive Water Methanol Injection systems, Snow Performance, and as a consequence can offer their customers the best available nitrous and water methanol products on the market.
IMAGES: Images may be a representation and may not reflect the actual product.
Limited Warranty
Nitrous Express (the warrantor) hereby warrants its product to the original purchaser thereof (the consumer) against any and all defects in workmanship and material under the following terms and conditions: The Limited Warranty is specifically limited to the original purchaser of the products and is enforceable only by such original purchaser. In the event of a defect in workmanship or material of the products, the Warrantor will repair or replace the product, or any defective part or parts thereof, at the election of the Warrantor, without charge to the consumer for such repair or replacement. This Limited Warranty shall not apply to labor charges, freight, material or other incidental expenses in connection with removal and/or replacement of such defective product on the Consumer’s vehicle. This Limited Warranty shall extend for a period of ninety (90) days, commencing from the date of the original purchase by the Consumer. The only exception to this limited term is for the NX "Lightning" series solenoids, which have a limited lifetime warranty (does not include electrical components, labor, or freight). The maximum liability of Nitrous Express in connection with this warranty shall not under any circumstances exceed the contract price of the product claimed to be defective.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
