Aluminum Satin Heat Exchanger with dual fans 2003-2004 Mustang Cobra Double Pass (L - 31 Inch) X (W - 5-3/8 Inch) X (H - 5-13/16 Inch) AFCO
The 2003–2004 Cobra model uses a dual pass design. This design improves power by creating a denser (lower temp.) intake charge versus stock. Our double pass design, combined with total grill covering, will increase the cooling ability of the system to drop your inlet temperatures to near ambient while under boost. A 60-70 degree temperature drop is typical compared to the stock system. This is critical in controlling detonation in a supercharged application. AFCO Heat Exchangers are now available for serious street performance enthusiasts with supercharged applications. AFCOs design incorporates the latest engineering and technology for enhanced coolant flow and improved thermal stabilization. AFCO Heat Exchangers are available as standard (high performance street) or pro series (drag race and extreme street). There is no drilling, cutting, or fabrication required. Detailed instructions included.
Over 30 years ago it became obvious to the founders of AFCO that there was an undeniable need for a better racing suspension and knowing that what they needed was not available in the marketplace they decided to do it themselves. And as you can guess their dedication earned them the success they enjoy today in the aftermarket performance industry for not only their exceptional racing suspensions but also their exhaust, brakes and cooling products.
If your venue is drag racing, track, muscle car or high performance then you will be impressed with the performance the AFCO products provide and are sure to find these will help you get to the winners circle. The passion that AFCO has for their products expects no other results and their success is a testament to this.
Their team of racers and high performance auto builders are the key to their success and their primo technical support is the piece de resistance. A contingent of superlative designers and engineers coupled with in-house engineering and design provides for the optimum in control and flexibility. Couple this with uncompromising product development and rigorous testing procedures and you have an assurance of an unbeatable product.
Quality control is certainly not overlooked at AFCO and is in fact given priority and not even the smallest part is too small to be checked. This along with maintaining product specifications throughout production means a product you can trust on your car.
Just a brief look at the impressive dual pass designed heat exchanger for the Mustang Cobra will make you a die hard fan of AFCO. The improvement in power is a result of the creation of a denser intake charge versus stock. The primo double pass design and complete grill covering will typically afford a drop in inlet temperatures to practically ambient while under boost with a 60-70 degree temperature drop being typical. This temperature drop is essential in order to control detonation in a supercharged application. And you will be happy to know that the AFCO has made their heat exchangers available for you big-time street performance enthusiasts.
And if you are in the market for a replacement radiator you will not go wrong with an AFCO radiator that affords you an impressive fit and stupendous performance. And the enhanced fin count ratio will provide your car with superlative cooling and you can’t beat the AFCO furnace brazed seal core manufactured without using epoxy.
Suspension products, the impetus for the birth of the company, cannot be overlooked particularly when you are in the racing arena and those who use multi leaf springs realize how critical accurate arch, load capacity, and durability are. Well the team at AFCO knows that too and their Leaf Springs are the highest quality racing springs available incorporating features unlike any comparable leaf spring. The primo AFCO reinforced front segment springs afford appreciable increases to forward bite, quicker throttle response, Improved durability, and a reduction in wheelbase variations during braking and acceleration. The team at AFCO did not forget those other all important suspension products like ball joints, control arms, spindles and swaged steel tubes, all designed and manufactured with the same AFCO superlative quality.
IMAGES: Images may be a representation and may not reflect the actual product.
LIMITED WARRANTY/DISCLAIMER
AFCO Performance Group LLC will repair or replace any products found upon our inspection to be defective in workmanship or material within 12 months from date of purchase for the original purchaser. Except for the limited warranty set forth herin, AFCO Performance Group LLC makes no warranties either expressed or implied, written or oral, with regard to the products including, without limitation, any warranty or merchantability of fitness for a particular purpose. In no event shall AFCO Performance Group LLC be liable for any special, incidental or consequential damages or any other damages whatsoever arising out of or connected with the use or misuse of the products. Purchasers acknowledge and agree that no person, entity or agent of AFCO Performance Group LLC has any authority to make any statement contrary to this disclaimer and that any warranty statements or representations allegedly made on behalf of AFCO Performance Group LLC by any such person, entity or agent are void. AFCO Performance Group LLC products are not D.O.T. approved or intended for street use. Purchasers are relying solely on their own skill and judgment to select, purchase and use suitable products and assume all responsibility and risk with regard thereto.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
Starting at 0% Order Now, Pay Later Learn More.
