Corbeau Drivers Seat Bracket for Audi A6, Corbeau Drivers Seat Bracket for Audi S6, Corbeau Drivers Seat Bracket for Volkswagen Passat
If you know anything about aftermarket seats and brackets, you’ll know that Corbeau is the best when it comes to our selection and fitment of custom brackets. Our brackets are the most affordable in the industry and are the only brackets that include sliders. When installing an aftermarket seat, the bracket is just as important as the seat. Without the correct bracket you will more than likely run into several issues during the installation process and beyond. Corbeau brackets are designed specifically for Corbeau seats and will not work with any other seat brand.
Bracket Terminology: Double Locking Sliders: Corbeau brackets include double locking sliders unless otherwise specified.
Part Numbers that end in NS: “NS” means no sliders. These are brackets that will adapt to your factory sliders. You will need your factory brackets and sliders for these to work.
Bench Brackets: Some brackets will only show a driver side option and will usually start with either a B or an F part number. When the bracket starts with an F, it’s for the front seats and is a single bracket that will mount both your driver and passenger seats. When the part number starts with B, it’s a rear seat bracket to mount a Corbeau bench seat. There are also a few brackets that start with C that will mount your Corbeau rear bench seat.
Universal Brackets: We do have universal brackets available for vehicles with flat floor pans. We have three different universal brackets that can be found under, “Universal Brackets” in the bracket list below. We have a flat bracket, a bracket that is about 2 inches tall, and a bracket that is adjustable from 4-7 inches tall.
Baja Adapters: Some of our suspension seats come with four vertical tabs on the bottom, which are designed to allow the seat to be bolt directly to a roll cage. These seats are the Baja SS, Baja Ultra, Baja Ultra Wide, and Baja XP. A Baja Adapter (A22002F) is required if you plan to mount these seats to a Corbeau bracket or flat mounting surface.
<< See all of our Corbeau Seat Options HERE >>
**** These Brackets Only Fit Corbeau Seats ****
Corbeau Drivers Seat Bracket for Audi A6, Corbeau Drivers Seat Bracket for Audi S6, Corbeau Drivers Seat Bracket for Volkswagen Passat
CORBEAU is responsible for providing quality seats to motorsport aficionados for fifty years and their reputation is one of excellence in design, construction, comfort and support. The myriad of designs and fabrics available give you a potpourri of opportunities to get just what you want whether it be for racing or just for aesthetic reasons or for a more comfortable ride on the drive to work. When it comes to racing seats CORBEAU knows that your seat is an important part of your car, not only for comfort but also for safety and they are equipped with harness capability and are available in various sizes and with varying kinds of support-they are not a one size fits all seat. Unlike other companies who try to tell you brackets are universal , CORBEAU knows you will probably need a bracket peculiar to your vehicle in order to install your seat and for this reason they have brackets for almost every car every made so that the job of installing your seat is an easy one and they are the only company who does that.
LMPerformance carries CORBEAU car seats, seat brackets, harness brackets and harness belts. All the aftermarket seating parts you need. LMPerformance also carries Reclining and BAJA seats by CORBEAU all with easy ordering and Fast Free Shipping. You can't do better than a CORBEAU racing seat from LMPerformance for comfort, quality, price and customer service. Buy Corbeau seats for the most incredible design and quality you can find!
The A4 CORBEAU racing seats are the perfect adjustable racing seat for tight spaces and minimal headroom applications and comes with high wear patches placed to protect your seat from abuse in the high wear areas. The CORBEAU A4 racing seat is available in cloth, with leatherette high wear patches, microsuede, with leather high wear patches, and 100% black leather.
The GTS II CORBEAU racing seats are the perfect seat for the daily driver looking for a sporty stock look and comfort. The CORBEAU GTS II has deep thigh and kidney supports while maintaining the "stock" look. The CORBEAU GTS II is available in cloth, microsuede, leather/suede combo, and 100% black leather.
The CR1 CORBEAU racing seats are one of the best-looking aftermarket seats available today and is available in Cloth, with leatherette high wear patches, Microsuede, with leather high wear patches, and 100% black Leather.
The CORBEAU LG1 racing seat is designed for comfort. The CORBEAU LG1 racing seat is available in Cloth, with leatherette high wear patches, Microsuede, with leather high wear patches, and 100% black Leather.
Lastly there is the CORBEAU TRS racing seat. This is one of CORBEAU's most aggressive reclining seats. The CORBEAU TRS's high thigh bolsters along with tight kidney and shoulder bolsters allow for a comfortable drive with hardly any body shifting. The CORBEAU TRS racing seat is available in Cloth, Microsuede, and 100% black Leather.
You can't do better than a CORBEAU racing seat from LMPerformance for comfort, quality, price and customer service.
IMAGES: Images may be a representation and may not reflect the actual product.
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
Starting at 0% Order Now, Pay Later Learn More.
