Product Description
STAGE 2 DAILY: Engineered for HP modifications. This Heavy Duty Pressure Plate has an increased clamp load with little or no increase in pedal pressure. The Organic disc material has a high metal content that increases the co-efficient of friction by two times over a stock lining and increases rotational strength up to a 12, 000 RPM burst point. This clutch system maintains a stock feel while offering strength and durability.
- Recommended usage is daily, street and moderate race.
STAGE 2 ENDURANCE: An SFI approved single mass flywheel is recommended for this application to get optimal performance. This clutch system is designed for the racing climate. The pressure plate is precision balance for vibration free operation at high RPM. The pressure plate fulcrum is altered for a positive disengagement and a quick shift. The disc is engineered with a Dual Damped design to provide accurate control when accelerating through corners. The friction material is a hybrid using a full face Feramic (Sintered Iron) lining on the flywheel side and a high metal content Organic lining on the pressure plate side. Engagement is positive yet buffered due to the high graphite content unique to Feramic facings.
- Recommended uses are daily and street with an emphasis on Rally and Endurance racing.
STAGE 2 DRAG: Drag racing requires a Single Mass SFI approved Flywheel to be included with each kit when the original design is Dual Mass. This system features a Heavy Duty Pressure Plate modified for a puck style disc with no cushion between the linings to keep the clutch pedal travel short and quick. The puck design disc reduces rotational mass and total drive surface area while increasing pounds per square inch on the surface of the friction material. This combination minimizes inertia, accelerating the transfer of torque from the engine to the wheels. The friction material used for this race application is Graphite Impregnated Ceramic. This compound exceeded all other friction materials when testing for durability, reduced chatter, heat transfer and torque capacity.
- Recommended uses are drag racing, drifting and limited street.
Fitments:
Short Description: K70684-HD-O, STAGE 2 DAILY
South Bend Clutch 11-15 Mini Cooper Turbo Stage 2 Daily Clutch Kit
South Bend Clutch Clutch Kit
K70684-HD-O, STAGE 2 DAILY.
Stage 2 Daily Clutch Kit
Clutch Kit
Your car’s clutch serves a multiplicity of purposes and each function is equally important and plays an integral part in your car’s performance. Firstly, your car’s transmission reduces the higher engine speed to the slower wheel speed increasing torque in the process, The clutch has the function of transmitting the torque from the engine to the drivetrain. Secondly, .it has the responsibility of delivering this power smoothly and thus causing a smooth movement of your vehicle. And of course your want the performance to be quiet with a reduction in drive related vibration and finally you will want to protect your car’s drivetrain.
All the above being said you want a clutch that you can count on to perform optimally accomplishing all of the goats outlined above and you want to do it with a clutch you can trust to fulfill all of these goals. You want a clutch from a company you can feel confident in and one who has the expertise and desire to provide you with a product that you can rely on even under the most difficult situations whether it be on the street or on the track.
If you are not familiar with such a company let the team at LMPERFORMANCE introduce you to South Bend Clutch. You might ask yourself why South Bend Clutch and we are here to answer that question for you and to allay your fears when shopping for a clutch since our number one goal at LMPERFORMANCE since 2001 is customer satisfaction providing you with top quality parts at a competitive price.
Let us start off by saying that South Bend Clutch is a fourth generation family owned and operated business so you are not buying from a newby or fly by night company but from one who has established themselves proudly over the generations and the team at LMPERFORMANCE considers this an important attribute and so should you. The fact that they are an SFI approved manufacturing, rebuilding and machining company further attests to their expertise in the field and lends credence to their ability in the field.. And in addition South Bend Clutch manufactures new and rebuilt clutches that range from those with OEM factory specifications to a varying degree of performance including heavy duty for all automotive truck and industrial applications further making it evident that South Bend’s knowledge and expertise in the field is unquestionable.
We would be remiss if we did not mention the fact that South Bend Clutch has as their goal the same one LMPerformance has and that goal is the providing of top quality clutches and clutch parts to their customers at a competitive price.
There are several reasons why you might be reading this right now and those range from just replacing a worn clutch to increasing the horsepower and torque of the engine, building up your vehicle for competitions like sled pulling or drag racing or some personal reason but you can rest assured that LMPerformance and South Bend Clutch are cognizant of your needs and want to help you get the most desirable clutch for your application. Trust the proven companies and you will not be disappointed.
IMAGES: Images may be a representation and may not reflect the actual product.
Often Purchased Together
These are parts that other customers have purchased while purchasing the product on this page.
South Bend Clutch Warranty Policy
For all South Bend warranties, the customer must contact them directly. Warranty will be covered until 12months/12,000 MFG Defects only.
South Bend Clutch, Inc. warrants that our clutches are free from defects in workmanship and material under normal use and service. The obligation of South Bend Clutch, Inc,. under the warranty is limited to repair or replacement of the defective product, which fails within 12 months or 12,000 miles. We will not be liable for losses that might be claimed as a result of the failure of any part, nor shall we be liable for damages or injury to any persons or property resulting from the misuses or improper installation of any part subject to this warranty.
Warranty Registration form is NOT for submitting a warranty claim when something happens to your clutch. It must be on file with us within 30 days of purchase. If you have a warranty claim, call the shop directly and talk with our technical dept.
South Bend Clutch, Inc. reserves the right to examine all parts returned for warranty claim to determine whether or not any such part has failed because of a defect in material or workmanship. Our obligation under this warranty shall be limited to repairing, replacing, or crediting, at our discretion, any part found to be defective.
The Limited Warranty will not be valid under the following express conditions:
- It is NOT registered within thirty (30) days of purchase.
- When purchased by retail customer for less than our MAP price (see Pricing Policy below)
- When not installed by a certified mechanic
- When flywheel was not replaced with new or resurfaced to specification
- Clutches which have been altered, improperly installed, or damaged by accident, negligence or misuse
- When transmission fails or has excessive wear
WARRANTY IS NON-TRANSFERRABLE
Products used for High Performance and/or Racing purposes which they were not origianlly engineered for, will not be covered.
Policies
California Residents: Prop 65 WARNING: This product MAY contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. For more information, visit www.P65Warnings.ca.gov
California Residents: TIRE WARNING: LMPerformance will not ship Tires to California.
Legal: Some or all of these parts may not comply with Federal, State, Province, and/or Local laws, ordinances, and regulations. Buyer takes all responsibility to ensure that any modifications or upgrades that have done conform to all applicable laws and regulations for road use, especially pertaining to safety and emissions. LMPerformance is not responsible for buyer not complying with Federal, State, Province, and/or Local laws, ordinances, and regulations. This policy shall be in force for all past, current, and future purchases from LMPerformance, Inc. LMPerformance will not ship ANY non-CARB compliant products to California where California requires products to be CARB certified such as Catalytic Converters and Induction Kits.
FREE SHIPPING: Please note FREE Shipping refers to shipping within the contiguous continental US only. All other locations extra. Some items that require Truck Freight Delivery will require a Truck Freight surcharge. This surcharge is still a discounted shipping amount that is lower then the actual truck freight shipping charge that is charged to LMP. LMP will try to still give the lowest price possible for truck freight items.
IMAGES: Images may be a representation and may not reflect the actual product. Examples would be SPEC stage 3 clutch kits which all use the same photo.
TYPOS: LMPerformance tries to present the best most accurate information on our website. Sometimes we get mistakes in product information sent from vendors such as typos. We can not be responsible for these typos, if you see something that does not look right please let us know before ordering so we can double check for you first. LMPerformance will not pay for typos in any way, monetarily or otherwise.
SPECIAL ORDER ITEMS: Some items are special ordered and may not be returnable, or even cancellable as they are going into production specifically because you ordered them. Special ordered items can have a 5-35% cancelation fee.
Cancellations: Instock orders cannot be canceled due to our automated ordering & fast shipping system. To keep our prices low, all cancelations are subject to a 5% cancelation fee to cover transaction processing fees. We reserve the right to charge up to a 10% cancellation fee for cancelled orders due to merchant fees, special order fees and the cost of processing and shipping orders.When you request a cancellation of an order or a part, please note that it may take time for a manufacturer to cancel an order if the order is drop-shipped. We also have to confirm that the product has not shipped. If the product has shipped then this must be processed as a return.Also note that sometimes products ship more quickly than expected, so we recommend that you do not purchase alternative products until receiving final confirmation of the cancellation.
Returns:We cannot accept returns on parts that have been used or installed. No returns will be accepted after 30 days. All Returns must be in original packaging. Prior authorization must be given before any return can be made. Up to a 25% Restocking Fee may apply. Special orders may be subject to Additional Manufacturer Restock Fees as well. Shipping cost will not be refunded.Hoods as well as PCM Programmers may not be returned unless defective and only for replacement. ALL returns must be first filed using our online form found here: https://www.lmperformance.com/returns.
Lost Order ClaimsAll lost order/package claims must be made within 5 days of the shipping date or tracking information delivery date. All claimes made after this date will not be accepted due to Shipping companies policies of filing loss claims.
Damaged Items or Incorrect Items: Please contact us right away if your item has been damaged in shipping or are incorrect. Please note that we will ship replacement items the same method of shipping the order was originally placed for. LMPerformance can not ship packages overnight at our cost if the original shipping was not also overnight. Claims must be filed in order for replacement parts to be shipped.
Warranties:Any warranty claims must be placed with the manufacturer. All of the products sold by LMPerformance, regardless of the manufacturer, are designed for Racing and Performance applications. Many of our manufacturers offer NO WARRANTY on their products, either stated or implied, due to the unusual stresses placed on the parts and because we have no control over how they are installed and used. Many of these products are designed for off-road use only and are not legal for use on public highways. If you have a question about the warranty on a specific product, please e-mail or call us. Buyer assumes all risk and liability associated with these products.
Installation:We are not responsible for or any costs associated with the installation or the improper installation of any products. Purchaser assumes the risk associated with the installation of products. We, along with the manufacturer of each product are not responsible for any direct or indirect damage to the vehicle, personal, or costs incurred from the use of products.
South Bend Clutch K70684-HD-O Clutch Kits - Single Review(s)
Other Popular Parts
Recently Viewed
Starting at 0% Order Now, Pay Later Learn More.
